Context Navigation

source: osgVisual/CMakeLists.txt @ 54

Last change on this file since 54 was 52, checked in by Torben Dannhauer, 14 years ago
Update CMakeLists.txt to support on the fly x64 builds coexistent to x86 builds on windows. Read CMakeLists.txt header for more information how to proceed.
File size: 13.0 KB

Line
1	#################################################################################################
2	# This file allows to configure osgVisual with CMAKE to generate native build solutions. #
3	# #
4	# Specify the following environment variables to use osgVisual and this CMAKE script: #
5	# * OSG_ROOT: Path to your 32 bit (x86) OSG, e.g. D:\OSG\OpenSceneGraph-2.9.8_x86 #
6	# * OSG_ROOT_X64: Path to your 64 bit (x64) OSG, e.g. D:\OSG\OpenSceneGraph-2.9.8_x64 #
7	# * OSG: Path to your 32 bit (x86) OSG and 3rdParty binary folder, #
8	# e.g. %OSG_ROOT%\bin;D:\OSG\3rdParty\bin\x86 #
9	# * OSG_X64: Path to your 64 bit (x64) OSG and 3rdParty binary folder, #
10	# e.g. %OSG_ROOT_X64%\bin;D:\OSG\3rdParty\bin\x64 #
11	# * PATH: Extend with %OSG% or %OSG_X64% to use OSG and osgVisual from command line, #
12	# e.g. PATH=%PATH%;%OSG% #
13	# #
14	# NOTE: On Visual Studio and x64 Arch, CMAKE uses the project settings to specify the #
15	# correct x64 OSG path, so you can use osg as 32 bit in your system path. #
16	# #
17	# #
18	#################################################################################################
19
20	cmake_minimum_required(VERSION 2.8)
21
22
23	PROJECT(osgVisual)
24	#SET(CMAKE_MODULE_PATH "${osgVisual_SOURCE_DIR}/../CMakeModules;${CMAKE_MODULE_PATH}")
25
26	#INCLUDE( CheckTypeSize )
27	#CHECK_TYPE_SIZE( "void*" SIZE_OF_VOID_P )
28	IF( CMAKE_SIZEOF_VOID_P EQUAL 4 )
29	MESSAGE( STATUS "32 bit architecture detected" )
30	SET(DESTINATION_ARCH "x86")
31	ENDIF()
32	IF( CMAKE_SIZEOF_VOID_P EQUAL 8 )
33	MESSAGE( STATUS "64 bit architecture detected" )
34	SET(DESTINATION_ARCH "x64")
35	ENDIF()
36
37
38	# Get OSG Settings
39	IF(DESTINATION_ARCH STREQUAL "x64")
40	SET(OSG_ROOT_BKP $ENV{OSG_ROOT}) # BACKUP old OSG_ROOT
41	SET(ENV{OSG_ROOT} $ENV{OSG_ROOT_X64}) # Replace OSGROOT with OSG_ROOT_X64 to force CMAKE to find the correct OSG version (64 bit)
42	ENDIF ()
43
44	SET(OpenSceneGraph_MARK_AS_ADVANCED ON)
45	FIND_PACKAGE(OpenSceneGraph 2.9.7 REQUIRED osgViewer OpenThreads osgDB osgTerrain osgGA osgText osgSim osgUtil)
46	FIND_PACKAGE(OpenGL REQUIRED)
47
48	IF(DESTINATION_ARCH STREQUAL "x64")
49	SET(ENV{OSG_ROOT} ${OSG_ROOT_BKP}) # Restore old OSG_ROOT
50	UNSET(OSG_ROOT_BKP) # Delete backup
51	ENDIF ()
52
53
54
55	# Module sky-silverlining - At the moment only for Win32, will be opened to Unix ASAP
56	# OPTION( OPTION_VAR "description string" [initial value] )
57	IF ( WIN32 )
58
59	SET(USE_SKY_SILVERLINING ON CACHE BOOL "Enable to use Sundog-soft's Silverlining SDK for sky & weather")
60	IF(USE_SKY_SILVERLINING )
61	SET(SOURCES
62	${SOURCES}
63	include/sky_Silverlining/skySilverLining_AtmosphereReference.h
64	include/sky_Silverlining/skySilverlining_cloudLayerSlot.h
65	include/sky_Silverlining/skySilverLining_cloudsDrawable.h
66	include/sky_Silverlining/skySilverLining_ProjectionMatrixCallback.h
67	include/sky_Silverlining/skySilverLining_skyDrawable.h
68	include/sky_Silverlining/visual_skySilverLining.h
69	src/sky_Silverlining/skySilverLining_cloudsDrawable.cpp
70	src/sky_Silverlining/skySilverLining_skyDrawable.cpp
71	src/sky_Silverlining/visual_skySilverLining.cpp
72	)
73
74	IF (DESTINATION_ARCH STREQUAL "x86")
75	SET(SILVERLINING_ARCH "win32")
76	ELSEIF ( DESTINATION_ARCH STREQUAL "x64" )
77	SET(SILVERLINING_ARCH "x64")
78	ENDIF ()
79	SET(SILVERLINING_LIBRARY_RELEASE $ENV{SILVERLINING_PATH}\\lib\\vc9\\${SILVERLINING_ARCH}\\SilverLining-MT-DLL.lib CACHE FILEPATH "Select the release library of Sundog-Soft's Silverlining SDK to link against." )
80	SET(SILVERLINING_LIBRARY_DEBUG $ENV{SILVERLINING_PATH}\\lib\\vc9\\${SILVERLINING_ARCH}\\SilverLining-MTD-DLL.lib CACHE FILEPATH "Select the debug library of Sundog-Soft's Silverlining SDK to link against." )
81	SET(SILVERLINING_INCLUDE_DIR "$ENV{SILVERLINING_PATH}\\Public Headers" CACHE PATH "Enter the path to the the public Include directory of Sundog-Soft's Silverlining SDK" )
82	SET(SILVERLINING_LICENSEE "Your user name" CACHE STRING "Enter your Silverlining licensee name. If you license available, osgVisual will work with silverlining as 5 minute demo with the default value." )
83	SET(SILVERLINING_LICENSE "Your license code" CACHE STRING "Enter your Silverlining license key. If you license available, osgVisual will work with silverlining as 5 minute demo with the default value." )
84	INCLUDE_DIRECTORIES(${SILVERLINING_INCLUDE_DIR} include/sky_Silverlining)
85	ADD_DEFINITIONS( "-DUSE_SKY_SILVERLINING" )
86	ADD_DEFINITIONS( "-DSILVERLINING_LICENSEE=\"${SILVERLINING_LICENSEE}\"" )
87	ADD_DEFINITIONS( "-DSILVERLINING_LICENSE=\"${SILVERLINING_LICENSE}\"" )
88
89	ELSE(USE_SKY_SILVERLINING)
90	UNSET(SILVERLINING_LIBRARY_RELEASE CACHE)
91	UNSET(SILVERLINING_LIBRARY_DEBUG CACHE)
92	UNSET(SILVERLINING_INCLUDE_DIR CACHE)
93	UNSET(SILVERLINING_LICENSEE)
94	UNSET(SILVERLINING_LICENSE)
95	ENDIF(USE_SKY_SILVERLINING)
96	ENDIF(WIN32)
97
98
99	# Module distortion
100	SET(USE_DISTORTION OFF CACHE BOOL "Enable to use distortion with Projection Designer's distortion maps")
101	IF(USE_DISTORTION)
102	SET(SOURCES
103	${SOURCES}
104	include/distortion/visual_distortion.h
105	src/distortion/visual_distortion.cpp
106	)
107	INCLUDE_DIRECTORIES(include/distortion)
108	ADD_DEFINITIONS( "-DUSE_DISTORTION" )
109	ENDIF(USE_DISTORTION)
110
111
112	# Module Vista2D - Only available under Win32
113	if( WIN32 )
114	SET(USE_VISTA2D OFF CACHE BOOL "Enable to use Vista2D by Wetzel Technology")
115	IF( USE_VISTA2D )
116	INCLUDE_DIRECTORIES( include/vista2D )
117	SET(SOURCES
118	${SOURCES}
119	include/vista2D/visual_vista2D.h
120	src/vista2D/visual_vista2D.cpp
121	)
122	SET(VISTA2D_INCLUDE_DIR . CACHE PATH "Select the INCLUDE directory path for Vista2D by Wetzel Technology." )
123	SET(VISTA2D_LIBRARY_DEBUG . CACHE FILEPATH "Select debug LIBRARY path for linking against Vista2D by Wetzel Technology." )
124	SET(VISTA2D_LIBRARY_RELEASE . CACHE FILEPATH "Select release LIBRARY path for linking against Vista2D by Wetzel Technology." )
125	INCLUDE_DIRECTORIES(${VISTA2D_INCLUDE_DIR})
126	ADD_DEFINITIONS( "-DUSE_VISTA2D" )
127	ELSE(USE_VISTA2D)
128	UNSET(VISTA2D_INCLUDE_DIR CACHE)
129	UNSET(VISTA2D_LIBRARY_DEBUG CACHE)
130	UNSET(VISTA2D_LIBRARY_RELEASE CACHE)
131	ENDIF(USE_VISTA2D)
132	ENDIF(WIN32)
133
134
135	# Module Spacenavigator manipulator - ONLY under WIN32
136	if( WIN32 )
137	# No header or linking required, because WIN32 COM interface used.
138	SET(USE_SPACEMOUSE ON CACHE BOOL "Enable to use camera manipulator based on Spacenavigator by 3DConnexion")
139	IF( USE_SPACEMOUSE )
140	SET(SOURCES
141	${SOURCES}
142	include/manip_Spacemouse/manip_spaceMouse.h
143	include/manip_Spacemouse/manip_freeSpaceMouse.h
144	include/manip_Spacemouse/manip_nodeTrackerSpaceMouse.h
145	src/manip_Spacemouse/manip_spaceMouse.cpp
146	src/manip_Spacemouse/manip_freeSpaceMouse.cpp
147	src/manip_Spacemouse/manip_nodeTrackerSpaceMouse.cpp
148	)
149	INCLUDE_DIRECTORIES(include/manip_Spacemouse)
150	ADD_DEFINITIONS( "-DUSE_SPACENAVIGATOR" )
151	ENDIF(USE_SPACEMOUSE)
152	ENDIF(WIN32)
153
154
155	# Module cluster
156	SET(USE_CLUSTER_UDP ON CACHE BOOL "Enable to use the UDP Implementation for the cluster interface")
157	IF( USE_CLUSTER_UDP )
158	SET(SOURCES
159	${SOURCES}
160	include/cluster/dataIO_cluster.h
161	include/cluster/dataIO_clusterUDP.h
162	include/cluster/dataIO_clusterUDP_Transmission.h
163	src/cluster/dataIO_clusterUDP.cpp
164	src/cluster/dataIO_clusterUDP_Transmission.cpp
165	)
166	ADD_DEFINITIONS( "-DUSE_CLUSTER_UDP" )
167	ELSE(USE_CLUSTER_UDP)
168	SET(SOURCES
169	${SOURCES}
170	include/cluster/dataIO_cluster.h
171	include/cluster/dataIO_clusterDummy.h
172	src/cluster/dataIO_clusterDummy.cpp
173	)
174	ADD_DEFINITIONS( "-DUSE_CLUSTER_DUMMY" )
175	ENDIF(USE_CLUSTER_UDP)
176
177
178	# Module extLink
179	SET(SOURCES
180	${SOURCES}
181	include/extLink/dataIO_extLink.h
182	include/extLink/manip_extLink.h
183	src/extLink/manip_extLink.cpp
184	)
185	IF ( WIN32 )
186	SET(USE_EXTLINK_VCL ON CACHE BOOL "Enable to use the VCL Implementation for the externalLink interface")
187	IF( USE_EXTLINK_VCL )
188	SET(EXTLINK_VCL_INCLUDE_DIR ../VCL_1.0.3.4/source/include/VCL CACHE PATH "Select the INCLUDE directory path for extLink VCL Implementation." )
189	SET(SOURCES
190	${SOURCES}
191	include/extLink/dataIO_extLinkVCL.h
192	src/extLink/dataIO_extLinkVCL.cpp
193	)
194	INCLUDE_DIRECTORIES(${EXTLINK_VCL_INCLUDE_DIR})
195	ADD_DEFINITIONS( "-DUSE_EXTLINK_VCL" )
196	#Linking: VCL uses #pragma to link, no need for linking configuration in CMAKE
197	ELSE(USE_EXTLINK_VCL)
198	SET(SOURCES
199	${SOURCES}
200	include/extLink/dataIO_extLinkDummy.h
201	src/extLink/dataIO_extLinkDummy.cpp
202	)
203	UNSET(EXTLINK_VCL_INCLUDE_DIR CACHE)
204	ADD_DEFINITIONS( "-DUSE_EXTLINK_DUMMY" )
205	ENDIF(USE_EXTLINK_VCL)
206	ELSE(WIN32)
207	UNSET(EXTLINK_VCL_INCLUDE_DIR CACHE)
208	SET(SOURCES
209	${SOURCES}
210	include/extLink/dataIO_extLinkDummy.h
211	src/extLink/dataIO_extLinkDummy.cpp
212	)
213	ADD_DEFINITIONS( "-DUSE_EXTLINK_DUMMY" )
214	ENDIF(WIN32)
215
216
217
218	# Set core sources
219	SET(SOURCES
220	${SOURCES}
221	# Core
222	include/core/visual_core.h
223	src/core/visual_core.cpp
224	src/core/osgVisual.cpp
225	# Util
226	include/util/visual_util.h
227	src/util/visual_util.cpp
228	# Draw 2D
229	include/draw2D/visual_draw2D.h
230	src/draw2D/visual_draw2D.cpp
231	# Debug HUD
232	include/draw2D/visual_debug_hud.h
233	src/draw2D/visual_debug_hud.cpp
234	# Example HUD
235	include/draw2D/visual_hud.h
236	src/draw2D/visual_hud.cpp
237	# Draw 3D
238	include/draw3D/visual_draw3D.h
239	src/draw3D/visual_draw3D.cpp
240	# Object Mounted Manipulator
241	include/manip_ObjectMounted/manip_objectMounted.h
242	src/manip_ObjectMounted/manip_objectMounted.cpp
243	# Objects
244	include/object/visual_object.h
245	include/object/object_updater.h
246	src/object/visual_object.cpp
247	src/object/object_updater.cpp
248	# DataIO
249	include/dataIO/visual_dataIO.h
250	include/dataIO/dataIO_transportContainer.h
251	include/dataIO/dataIO_slot.h
252	include/dataIO/dataIO_executer.h
253	src/dataIO/visual_dataIO.cpp
254	src/dataIO/dataIO_transportContainer.cpp
255	src/dataIO/dataIO_slot.cpp
256	src/dataIO/dataIO_executer.cpp
257	)
258
259	INCLUDE_DIRECTORIES(include/core include/util include/draw2D include/draw3D include/object include/manip_ObjectMounted include/manip_Spacemouse)
260	INCLUDE_DIRECTORIES(include/dataIO include/cluster include/extLink ${OPENSCENEGRAPH_INCLUDE_DIRS} .)
261
262
263	# Executable Output
264	SET(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${CMAKE_SOURCE_DIR}/bin)
265	ADD_EXECUTABLE(osgVisual ${SOURCES})
266
267
268	# Linking
269	TARGET_LINK_LIBRARIES(osgVisual ${OPENSCENEGRAPH_LIBRARIES} "OpenGL32.lib")
270	IF(USE_SKY_SILVERLINING )
271	TARGET_LINK_LIBRARIES(osgVisual "winmm.lib" debug ${SILVERLINING_LIBRARY_DEBUG} optimized ${SILVERLINING_LIBRARY_RELEASE})
272	ENDIF(USE_SKY_SILVERLINING)
273
274	IF(USE_VISTA2D)
275	TARGET_LINK_LIBRARIES(osgVisual debug ${VISTA2D_LIBRARY_DEBUG} optimized ${VISTA2D_LIBRARY_RELEASE})
276	ENDIF(USE_VISTA2D)
277
278
279
280	# CMAKE Fix for VS to not prepend build type to path.
281	SET_TARGET_PROPERTIES(osgVisual PROPERTIES PREFIX "../")
282	SET_TARGET_PROPERTIES( osgVisual PROPERTIES DEBUG_POSTFIX d )
283
284
285	# Generating vcproj file, if MSVC to preset debugging parameter - based on http://stackoverflow.com/questions/1005901/how-to-set-path-environment-variable-using-cmake-and-visual-studio-to-run-test
286	IF (MSVC)
287	# Set up a default .user file that contains the debugging setup
288	## Find user and system name
289	SET(SYSTEM_NAME $ENV{USERDOMAIN} CACHE STRING "Build System Name")
290	SET(USER_NAME $ENV{USERNAME} CACHE STRING "Build System UserName")
291	SET(USERFILE_COMMAND_DEBUG "$(TargetPath)" CACHE STRING "Command to execute on debugging (VS Project settings)" )
292	SET(USERFILE_WORKING_DIRECTORY_DEBUG "bin" CACHE STRING "Working directory on debugging (VS Project settings)" )
293	SET(USERFILE_COMMAND_ARGUMENTS_DEBUG "-C center --window 100 100 800 600 -m D:/OpenSceneGraph/VPB-Testdatensatz/DB_Small/database.ive -p salzburg.path" CACHE STRING "Command arguments (VS Project settings)" )
294	SET(USERFILE_REMOTE_MACHINE_DEBUG ${USER_NAME} CACHE STRING "Remote Debugging Machine (VS Project settings)")
295	IF (DESTINATION_ARCH STREQUAL "x64")
296	SET(USERFILE_ENVIRONMENT "PATH=%OSG_X64%;%PATH%" CACHE STRING "Environment Variables that VS should merge on thy fly with system environment to run osgVisual (VS Project settings)")
297	ENDIF ()
298
299
300	# Only do this if one doesn't already exist
301	SET (USER_FILE ${PROJECT_NAME}.vcproj.${SYSTEM_NAME}.${USER_NAME}.user)
302	IF (NOT EXISTS "${USER_FILE}")
303	message (STATUS "Creating ${USER_FILE} with default debug settings")
304	# These are the configuration variables
305	IF (CMAKE_GENERATOR MATCHES "Win64")
306	SET (USERFILE_PLATFORM "x64")
307	ELSE ()
308	SET (USERFILE_PLATFORM "Win32")
309	ENDIF ()
310
311	# Configure the template file
312	# MSC_VER 1300: MSC 13.0, VC 7.0, VS 2002
313	# MSC_VER 1310: MSC 13.1, VC 7.1, VS 2003
314	# MSC_VER 1400: MSC 14.0, VC 8.0, VS 2005
315	# MSC_VER 1500: MSC 15.0, VC 9.0, VS 2008
316	# MSC_VER 1600: MSC ??.0, VC 10.0, VS 2010
317	IF (MSVC_VERSION EQUAL 1400)
318	CONFIGURE_FILE(VC80.vcproj.user.template ${USER_FILE} @ONLY)
319	ENDIF()
320	IF (MSVC_VERSION EQUAL 1500)
321	CONFIGURE_FILE(VC90.vcproj.user.template ${USER_FILE} @ONLY)
322	ENDIF()
323	ELSE()
324	message (STATUS "Userfile ${USER_FILE} already exist: Skipping")
325	ENDIF()
326	ENDIF()
327
328

Note: See TracBrowser for help on using the repository browser.

Download in other formats: