source: osgVisual/CMakeLists.txt @ 58

Last change on this file since 58 was 58, checked in by Torben Dannhauer, 14 years ago

added support cluster implementation via Boost ASIO TCP iostreams.

Status: Skeleton, ready to implement.

Minor: changed Silverlining default clouds.
File size: 13.9 KB
Line 
1#################################################################################################
2# This file allows to configure osgVisual with CMAKE to generate native build solutions.                #
3#                                                                                                                                                                                               #
4# Specify the following environment variables to use osgVisual and this CMAKE script:                   #
5#       * OSG_ROOT: Path to your 32 bit (x86) OSG, e.g. D:\OSG\OpenSceneGraph-2.9.8_x86                         #
6#       * OSG_ROOT_X64: Path to your 64 bit (x64) OSG, e.g. D:\OSG\OpenSceneGraph-2.9.8_x64                     #
7#       * OSG: Path to your 32 bit (x86) OSG and 3rdParty binary folder,                                                        #
8#                e.g. %OSG_ROOT%\bin;D:\OSG\3rdParty\bin\x86                                                                                    #
9#       * OSG_X64: Path to your 64 bit (x64) OSG and 3rdParty binary folder,                                            #
10#                e.g. %OSG_ROOT_X64%\bin;D:\OSG\3rdParty\bin\x64                                                                                #
11#       * PATH: Extend with %OSG% or %OSG_X64% to use OSG and osgVisual from command line,                      #
12#                e.g. PATH=%PATH%;%OSG%                                                                                                                                 #
13#                                                                                                                                                                                               #
14#       NOTE:   On Visual Studio and x64 Arch, CMAKE uses the project settings to specify the           #
15#                       correct x64 OSG path, so you can use osg as 32 bit in your system path.                         #
16#                                                                                                                                                                                               #
17#                                                                                                                                                                                               #
18#################################################################################################
19
20cmake_minimum_required(VERSION 2.8)
21
22
23PROJECT(osgVisual)
24#SET(CMAKE_MODULE_PATH "${osgVisual_SOURCE_DIR}/../CMakeModules;${CMAKE_MODULE_PATH}")
25
26#INCLUDE( CheckTypeSize )
27#CHECK_TYPE_SIZE( "void*" SIZE_OF_VOID_P )
28IF( CMAKE_SIZEOF_VOID_P EQUAL 4 )
29    MESSAGE( STATUS "32 bit architecture detected" )
30    SET(DESTINATION_ARCH "x86")
31ENDIF()
32IF( CMAKE_SIZEOF_VOID_P EQUAL 8 )
33    MESSAGE( STATUS "64 bit architecture detected" )
34    SET(DESTINATION_ARCH "x64")
35ENDIF()
36
37
38# Get OSG Settings
39IF(DESTINATION_ARCH STREQUAL "x64")
40        SET(OSG_ROOT_BKP $ENV{OSG_ROOT})        # BACKUP old OSG_ROOT
41        SET(ENV{OSG_ROOT} $ENV{OSG_ROOT_X64})   # Replace OSGROOT with OSG_ROOT_X64 to force CMAKE to find the correct OSG version (64 bit)
42ENDIF ()
43
44SET(OpenSceneGraph_MARK_AS_ADVANCED ON)
45FIND_PACKAGE(OpenSceneGraph 2.9.8 REQUIRED osgViewer OpenThreads osgDB osgTerrain osgGA osgText osgSim osgUtil)
46FIND_PACKAGE(OpenGL REQUIRED)
47
48IF(DESTINATION_ARCH STREQUAL "x64")
49        SET(ENV{OSG_ROOT} ${OSG_ROOT_BKP})      # Restore old OSG_ROOT
50        UNSET(OSG_ROOT_BKP)                                     # Delete backup
51ENDIF ()
52
53
54
55# Module sky-silverlining - At the moment only for Win32, will be opened to Unix ASAP
56# OPTION( OPTION_VAR "description string" [initial value] )
57IF ( WIN32 )
58       
59        SET(USE_SKY_SILVERLINING ON CACHE BOOL "Enable to use Sundog-soft's Silverlining SDK for sky & weather")
60        IF(USE_SKY_SILVERLINING )
61                SET(SOURCES
62                        ${SOURCES}
63                        include/sky_Silverlining/skySilverLining_AtmosphereReference.h
64                        include/sky_Silverlining/skySilverlining_cloudLayerSlot.h
65                        include/sky_Silverlining/skySilverLining_cloudsDrawable.h
66                        include/sky_Silverlining/skySilverLining_ProjectionMatrixCallback.h
67                        include/sky_Silverlining/skySilverLining_skyDrawable.h
68                        include/sky_Silverlining/visual_skySilverLining.h
69                        src/sky_Silverlining/skySilverLining_cloudsDrawable.cpp
70                        src/sky_Silverlining/skySilverLining_skyDrawable.cpp
71                        src/sky_Silverlining/visual_skySilverLining.cpp                 
72                )
73               
74                IF (DESTINATION_ARCH STREQUAL "x86")
75                        SET(SILVERLINING_ARCH "win32")
76                ELSEIF ( DESTINATION_ARCH STREQUAL "x64" )
77                        SET(SILVERLINING_ARCH "x64")
78                ENDIF ()
79                SET(SILVERLINING_LIBRARY_RELEASE $ENV{SILVERLINING_PATH}\\lib\\vc9\\${SILVERLINING_ARCH}\\SilverLining-MT-DLL.lib CACHE FILEPATH "Select the release library of Sundog-Soft's Silverlining SDK to link against." )
80                SET(SILVERLINING_LIBRARY_DEBUG $ENV{SILVERLINING_PATH}\\lib\\vc9\\${SILVERLINING_ARCH}\\SilverLining-MTD-DLL.lib CACHE FILEPATH "Select the debug library of Sundog-Soft's Silverlining SDK to link against." )
81                SET(SILVERLINING_INCLUDE_DIR "$ENV{SILVERLINING_PATH}\\Public Headers" CACHE PATH "Enter the path to the the public Include directory of Sundog-Soft's Silverlining SDK" )
82                SET(SILVERLINING_LICENSEE "Your user name" CACHE STRING "Enter your Silverlining licensee name. If you license available, osgVisual will work with silverlining as 5 minute demo with the default value." )
83                SET(SILVERLINING_LICENSE "Your license code" CACHE STRING "Enter your Silverlining license key. If you license available, osgVisual will work with silverlining as 5 minute demo with the default value." )
84                INCLUDE_DIRECTORIES(${SILVERLINING_INCLUDE_DIR} include/sky_Silverlining)
85                ADD_DEFINITIONS( "-DUSE_SKY_SILVERLINING" )
86                ADD_DEFINITIONS( "-DSILVERLINING_LICENSEE=\"${SILVERLINING_LICENSEE}\"" )
87                ADD_DEFINITIONS( "-DSILVERLINING_LICENSE=\"${SILVERLINING_LICENSE}\"" )
88               
89        ELSE(USE_SKY_SILVERLINING)
90                UNSET(SILVERLINING_LIBRARY_RELEASE CACHE)
91                UNSET(SILVERLINING_LIBRARY_DEBUG CACHE)
92                UNSET(SILVERLINING_INCLUDE_DIR CACHE)
93                UNSET(SILVERLINING_LICENSEE)
94                UNSET(SILVERLINING_LICENSE)
95        ENDIF(USE_SKY_SILVERLINING)
96ENDIF(WIN32)
97
98
99# Module distortion
100SET(USE_DISTORTION OFF CACHE BOOL "Enable to use distortion with Projection Designer's distortion maps")
101IF(USE_DISTORTION)
102        SET(SOURCES
103                ${SOURCES}
104                include/distortion/visual_distortion.h
105                src/distortion/visual_distortion.cpp
106        )
107        INCLUDE_DIRECTORIES(include/distortion)
108        ADD_DEFINITIONS( "-DUSE_DISTORTION" )
109ENDIF(USE_DISTORTION)
110
111
112# Module Vista2D - Only available under Win32
113if( WIN32 )
114        SET(USE_VISTA2D OFF CACHE BOOL "Enable to use Vista2D by Wetzel Technology")
115        IF( USE_VISTA2D )
116                INCLUDE_DIRECTORIES( include/vista2D )
117                SET(SOURCES
118                        ${SOURCES}
119                        include/vista2D/visual_vista2D.h
120                        src/vista2D/visual_vista2D.cpp 
121                )
122                SET(VISTA2D_INCLUDE_DIR . CACHE PATH "Select the INCLUDE directory path for Vista2D by Wetzel Technology." )
123                SET(VISTA2D_LIBRARY_DEBUG . CACHE FILEPATH "Select debug LIBRARY path for linking against Vista2D by Wetzel Technology." )
124                SET(VISTA2D_LIBRARY_RELEASE . CACHE FILEPATH "Select release LIBRARY path for linking against Vista2D by Wetzel Technology." )
125                INCLUDE_DIRECTORIES(${VISTA2D_INCLUDE_DIR})
126                ADD_DEFINITIONS( "-DUSE_VISTA2D" )
127        ELSE(USE_VISTA2D)
128                UNSET(VISTA2D_INCLUDE_DIR CACHE)
129                UNSET(VISTA2D_LIBRARY_DEBUG CACHE)
130                UNSET(VISTA2D_LIBRARY_RELEASE CACHE)
131        ENDIF(USE_VISTA2D)
132ENDIF(WIN32)
133
134
135# Module Spacenavigator manipulator - ONLY under WIN32
136if( WIN32 )
137        # No header or linking required, because WIN32 COM interface used.
138        SET(USE_SPACEMOUSE ON CACHE BOOL "Enable to use camera manipulator based on Spacenavigator by 3DConnexion")
139        IF( USE_SPACEMOUSE )
140                SET(SOURCES
141                        ${SOURCES}
142                        include/manip_Spacemouse/manip_spaceMouse.h
143                        include/manip_Spacemouse/manip_freeSpaceMouse.h
144                        include/manip_Spacemouse/manip_nodeTrackerSpaceMouse.h
145                        src/manip_Spacemouse/manip_spaceMouse.cpp
146                        src/manip_Spacemouse/manip_freeSpaceMouse.cpp
147                        src/manip_Spacemouse/manip_nodeTrackerSpaceMouse.cpp
148                )
149                INCLUDE_DIRECTORIES(include/manip_Spacemouse)
150                ADD_DEFINITIONS( "-DUSE_SPACENAVIGATOR" )
151        ENDIF(USE_SPACEMOUSE)
152ENDIF(WIN32)
153
154
155# Module cluster
156SET(USE_CLUSTER_UDP ON CACHE BOOL "Enable to use the UDP Implementation for the cluster interface")
157SET(USE_CLUSTER_ASIO_TCP_IOSTREAM ON CACHE BOOL "Enable to use the Boost ASIO TCP iostream Implementation for the cluster interface")
158IF( USE_CLUSTER_UDP   )
159                SET(SOURCES
160                        ${SOURCES}
161                        include/cluster/dataIO_cluster.h
162                        include/cluster/dataIO_clusterUDP.h
163                        include/cluster/dataIO_clusterUDP_Transmission.h
164                        src/cluster/dataIO_clusterUDP.cpp
165                        src/cluster/dataIO_clusterUDP_Transmission.cpp
166                )
167                ADD_DEFINITIONS( "-DUSE_CLUSTER_UDP" )
168ENDIF()
169
170IF( USE_CLUSTER_ASIO_TCP_IOSTREAM )
171                SET(SOURCES
172                        ${SOURCES}
173                        include/cluster/dataIO_cluster.h
174                        include/cluster/dataIO_clusterAsioTcpIostream.h
175                        src/cluster/dataIO_clusterAsioTcpIostream.cpp
176                )
177                ADD_DEFINITIONS( "-DUSE_CLUSTER_ASIO_TCP_IOSTREAM" )
178                #SET(BOOST_ASIO_LIBRARY_RELEASE ../3rdParty_x86_x64/include/bo.lib CACHE FILEPATH "Select the release library of Boost ASIO to link against." )
179                #SET(BOOST_ASIO_LIBRARY_DEBUG ../3rdParty_x86_x64/lib\x86/adsda.lib CACHE FILEPATH "Select the debug library of Boost ASIO to link against." )
180                SET(BOOST_INCLUDE_DIR "../../3rdParty_x86_x64/include/boost-1.43.0/" CACHE PATH "Enter the path to the the include directory of Boost" )
181ELSE()
182                #UNSET(BOOST_ASIO_LIBRARY_RELEASE CACHE)
183                #UNSET(BOOST_ASIO_LIBRARY_DEBUG CACHE)
184                UNSET(BOOST_ASIO_INCLUDE_DIR CACHE)     
185ENDIF()
186
187IF(NOT USE_CLUSTER_UDP AND NOT USE_CLUSTER_ASIO_TCP_IOSTREAM)
188                SET(SOURCES
189                        ${SOURCES}
190                        include/cluster/dataIO_cluster.h
191                        include/cluster/dataIO_clusterDummy.h
192                        src/cluster/dataIO_clusterDummy.cpp
193                )
194                ADD_DEFINITIONS( "-DUSE_CLUSTER_DUMMY" )
195ENDIF()
196
197
198# Module extLink
199SET(SOURCES
200        ${SOURCES}
201        include/extLink/dataIO_extLink.h
202        include/extLink/manip_extLink.h
203        src/extLink/manip_extLink.cpp
204)
205IF ( WIN32 )
206        SET(USE_EXTLINK_VCL ON CACHE BOOL "Enable to use the VCL Implementation for the externalLink interface")
207        IF( USE_EXTLINK_VCL )
208                SET(EXTLINK_VCL_INCLUDE_DIR ../VCL_1.0.3.4/source/include/VCL CACHE PATH "Select the INCLUDE directory path for extLink VCL Implementation." )
209                SET(SOURCES
210                        ${SOURCES}
211                        include/extLink/dataIO_extLinkVCL.h
212                        src/extLink/dataIO_extLinkVCL.cpp
213                )
214                INCLUDE_DIRECTORIES(${EXTLINK_VCL_INCLUDE_DIR})
215                ADD_DEFINITIONS( "-DUSE_EXTLINK_VCL" )
216                #Linking: VCL uses #pragma to link, no need for linking configuration in CMAKE
217        ELSE(USE_EXTLINK_VCL)
218                SET(SOURCES
219                        ${SOURCES}
220                        include/extLink/dataIO_extLinkDummy.h
221                        src/extLink/dataIO_extLinkDummy.cpp
222                )
223                UNSET(EXTLINK_VCL_INCLUDE_DIR CACHE)
224                ADD_DEFINITIONS( "-DUSE_EXTLINK_DUMMY" )
225        ENDIF(USE_EXTLINK_VCL)
226ELSE(WIN32)
227        UNSET(EXTLINK_VCL_INCLUDE_DIR CACHE)
228        SET(SOURCES
229                ${SOURCES}
230                include/extLink/dataIO_extLinkDummy.h
231                src/extLink/dataIO_extLinkDummy.cpp
232        )
233        ADD_DEFINITIONS( "-DUSE_EXTLINK_DUMMY" )
234ENDIF(WIN32)
235
236
237
238# Set core sources
239SET(SOURCES
240        ${SOURCES}
241        # Core
242        include/core/visual_core.h
243        src/core/visual_core.cpp
244        src/core/osgVisual.cpp
245        # Util
246        include/util/visual_util.h
247        src/util/visual_util.cpp
248        # Draw 2D
249        include/draw2D/visual_draw2D.h
250        src/draw2D/visual_draw2D.cpp
251        # Debug HUD
252        include/draw2D/visual_debug_hud.h
253        src/draw2D/visual_debug_hud.cpp
254        # Example HUD
255        include/draw2D/visual_hud.h
256        src/draw2D/visual_hud.cpp
257        # Draw 3D
258        include/draw3D/visual_draw3D.h
259        src/draw3D/visual_draw3D.cpp
260        # Object Mounted Manipulator
261        include/manip_ObjectMounted/manip_objectMounted.h
262        src/manip_ObjectMounted/manip_objectMounted.cpp
263        # Objects
264        include/object/visual_object.h
265        include/object/object_updater.h
266        src/object/visual_object.cpp
267        src/object/object_updater.cpp
268        # DataIO
269        include/dataIO/visual_dataIO.h
270        include/dataIO/dataIO_transportContainer.h
271        include/dataIO/dataIO_slot.h
272        include/dataIO/dataIO_executer.h
273        src/dataIO/visual_dataIO.cpp
274        src/dataIO/dataIO_transportContainer.cpp
275        src/dataIO/dataIO_slot.cpp
276        src/dataIO/dataIO_executer.cpp
277)
278
279INCLUDE_DIRECTORIES(include/core include/util include/draw2D include/draw3D include/object include/manip_ObjectMounted include/manip_Spacemouse)
280INCLUDE_DIRECTORIES(include/dataIO include/cluster include/extLink ${OPENSCENEGRAPH_INCLUDE_DIRS} .)
281
282
283# Executable Output
284SET(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${CMAKE_SOURCE_DIR}/bin)
285ADD_EXECUTABLE(osgVisual ${SOURCES})
286
287
288# Linking
289TARGET_LINK_LIBRARIES(osgVisual ${OPENSCENEGRAPH_LIBRARIES} "OpenGL32.lib")
290IF(USE_SKY_SILVERLINING )
291        TARGET_LINK_LIBRARIES(osgVisual "winmm.lib" debug ${SILVERLINING_LIBRARY_DEBUG} optimized ${SILVERLINING_LIBRARY_RELEASE})
292ENDIF(USE_SKY_SILVERLINING)
293               
294IF(USE_VISTA2D)
295        TARGET_LINK_LIBRARIES(osgVisual  debug ${VISTA2D_LIBRARY_DEBUG} optimized ${VISTA2D_LIBRARY_RELEASE})
296ENDIF(USE_VISTA2D)
297
298
299
300# CMAKE Fix for VS to not prepend build type to path.
301SET_TARGET_PROPERTIES(osgVisual PROPERTIES PREFIX "../")
302SET_TARGET_PROPERTIES( osgVisual PROPERTIES DEBUG_POSTFIX d )
303
304
305# Generating vcproj file, if MSVC to preset debugging parameter  - based on http://stackoverflow.com/questions/1005901/how-to-set-path-environment-variable-using-cmake-and-visual-studio-to-run-test
306IF (MSVC)
307    # Set up a default .user file that contains the debugging setup
308    ## Find user and system name
309        SET(SYSTEM_NAME $ENV{USERDOMAIN} CACHE STRING "Build System Name")
310        SET(USER_NAME $ENV{USERNAME} CACHE STRING "Build System UserName")
311        SET(USERFILE_COMMAND_DEBUG "$(TargetPath)" CACHE STRING "Command to execute on debugging (VS Project settings)" )
312        SET(USERFILE_WORKING_DIRECTORY_DEBUG "bin" CACHE STRING "Working directory on debugging (VS Project settings)" )
313        SET(USERFILE_COMMAND_ARGUMENTS_DEBUG "-C center --window 100 100 800 600 -m D:/OpenSceneGraph/VPB-Testdatensatz/DB_Small/database.ive -p salzburg.path" CACHE STRING "Command arguments (VS Project settings)" )
314        SET(USERFILE_REMOTE_MACHINE_DEBUG ${USER_NAME} CACHE STRING "Remote Debugging Machine (VS Project settings)")
315        IF (DESTINATION_ARCH STREQUAL "x64")
316                SET(USERFILE_ENVIRONMENT "PATH=%OSG_X64%;%PATH%" CACHE STRING "Environment Variables that VS should merge on thy fly with system environment to run osgVisual (VS Project settings)")
317        ENDIF ()
318
319
320    # Only do this if one doesn't already exist
321    SET (USER_FILE ${PROJECT_NAME}.vcproj.${SYSTEM_NAME}.${USER_NAME}.user)
322    IF (NOT EXISTS "${USER_FILE}")
323        message (STATUS "Creating ${USER_FILE} with default debug settings")
324        # These are the configuration variables
325        IF (CMAKE_GENERATOR MATCHES "Win64")
326            SET (USERFILE_PLATFORM "x64")
327        ELSE ()
328            SET (USERFILE_PLATFORM "Win32")
329        ENDIF ()
330
331                # Configure the template file
332                # MSC_VER 1300: MSC 13.0, VC 7.0, VS 2002
333                # MSC_VER 1310: MSC 13.1, VC 7.1, VS 2003
334                # MSC_VER 1400: MSC 14.0, VC 8.0, VS 2005
335                # MSC_VER 1500: MSC 15.0, VC 9.0, VS 2008
336                # MSC_VER 1600: MSC ??.0, VC 10.0, VS 2010
337                IF (MSVC_VERSION EQUAL 1400)
338                        CONFIGURE_FILE(VC80.vcproj.user.template ${USER_FILE} @ONLY)
339                ENDIF()
340                IF (MSVC_VERSION EQUAL 1500)
341                        CONFIGURE_FILE(VC90.vcproj.user.template ${USER_FILE} @ONLY)
342                ENDIF()         
343        ELSE()
344                message (STATUS "Userfile ${USER_FILE} already exist: Skipping")
345    ENDIF()
346ENDIF()
347
348
Note: See TracBrowser for help on using the repository browser.