source: osgVisual/trunk/Doxyfile

Last change on this file was 79, checked in by Torben Dannhauer, 14 years ago

updated doxyfile to exclude the ENet files from the documentation

File size: 66.9 KB
Line 
1# Doxyfile 1.6.3
2
3# This file describes the settings to be used by the documentation system
4# doxygen (www.doxygen.org) for a project
5#
6# All text after a hash (#) is considered a comment and will be ignored
7# The format is:
8#       TAG = value [value, ...]
9# For lists items can also be appended using:
10#       TAG += value [value, ...]
11# Values that contain spaces should be placed between quotes (" ")
12
13#---------------------------------------------------------------------------
14# Project related configuration options
15#---------------------------------------------------------------------------
16
17# This tag specifies the encoding used for all characters in the config file
18# that follow. The default is UTF-8 which is also the encoding used for all
19# text before the first occurrence of this tag. Doxygen uses libiconv (or the
20# iconv built into libc) for the transcoding. See
21# http://www.gnu.org/software/libiconv for the list of possible encodings.
22
23DOXYFILE_ENCODING      = UTF-8
24
25# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
26# by quotes) that should identify the project.
27
28PROJECT_NAME           = osgVisual
29
30# The PROJECT_NUMBER tag can be used to enter a project or revision number.
31# This could be handy for archiving the generated documentation or
32# if some version control system is used.
33
34PROJECT_NUMBER         = Trunk
35
36# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
37# base path where the generated documentation will be put.
38# If a relative path is entered, it will be relative to the location
39# where doxygen was started. If left blank the current directory will be used.
40
41OUTPUT_DIRECTORY       = ./doc
42
43# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
44# 4096 sub-directories (in 2 levels) under the output directory of each output
45# format and will distribute the generated files over these directories.
46# Enabling this option can be useful when feeding doxygen a huge amount of
47# source files, where putting all generated files in the same directory would
48# otherwise cause performance problems for the file system.
49
50CREATE_SUBDIRS         = NO
51
52# The OUTPUT_LANGUAGE tag is used to specify the language in which all
53# documentation generated by doxygen is written. Doxygen will use this
54# information to generate all constant output in the proper language.
55# The default language is English, other supported languages are:
56# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
57# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
58# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
59# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
60# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
61# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
62
63OUTPUT_LANGUAGE        = English
64
65# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
66# include brief member descriptions after the members that are listed in
67# the file and class documentation (similar to JavaDoc).
68# Set to NO to disable this.
69
70BRIEF_MEMBER_DESC      = YES
71
72# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
73# the brief description of a member or function before the detailed description.
74# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
75# brief descriptions will be completely suppressed.
76
77REPEAT_BRIEF           = YES
78
79# This tag implements a quasi-intelligent brief description abbreviator
80# that is used to form the text in various listings. Each string
81# in this list, if found as the leading text of the brief description, will be
82# stripped from the text and the result after processing the whole list, is
83# used as the annotated text. Otherwise, the brief description is used as-is.
84# If left blank, the following values are used ("$name" is automatically
85# replaced with the name of the entity): "The $name class" "The $name widget"
86# "The $name file" "is" "provides" "specifies" "contains"
87# "represents" "a" "an" "the"
88
89ABBREVIATE_BRIEF       = "The $name class" \
90                         "The $name widget" \
91                         "The $name file" \
92                         is \
93                         provides \
94                         specifies \
95                         contains \
96                         represents \
97                         a \
98                         an \
99                         the
100
101# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
102# Doxygen will generate a detailed section even if there is only a brief
103# description.
104
105ALWAYS_DETAILED_SEC    = NO
106
107# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
108# inherited members of a class in the documentation of that class as if those
109# members were ordinary class members. Constructors, destructors and assignment
110# operators of the base classes will not be shown.
111
112INLINE_INHERITED_MEMB  = NO
113
114# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
115# path before files name in the file list and in the header files. If set
116# to NO the shortest path that makes the file name unique will be used.
117
118FULL_PATH_NAMES        = YES
119
120# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
121# can be used to strip a user-defined part of the path. Stripping is
122# only done if one of the specified strings matches the left-hand part of
123# the path. The tag can be used to show relative paths in the file list.
124# If left blank the directory from which doxygen is run is used as the
125# path to strip.
126
127STRIP_FROM_PATH        = /Users/dimitri/doxygen/mail/1.5.7/doxywizard/
128
129# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
130# the path mentioned in the documentation of a class, which tells
131# the reader which header file to include in order to use a class.
132# If left blank only the name of the header file containing the class
133# definition is used. Otherwise one should specify the include paths that
134# are normally passed to the compiler using the -I flag.
135
136STRIP_FROM_INC_PATH    =
137
138# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
139# (but less readable) file names. This can be useful is your file systems
140# doesn't support long names like on DOS, Mac, or CD-ROM.
141
142SHORT_NAMES            = NO
143
144# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
145# will interpret the first line (until the first dot) of a JavaDoc-style
146# comment as the brief description. If set to NO, the JavaDoc
147# comments will behave just like regular Qt-style comments
148# (thus requiring an explicit @brief command for a brief description.)
149
150JAVADOC_AUTOBRIEF      = NO
151
152# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
153# interpret the first line (until the first dot) of a Qt-style
154# comment as the brief description. If set to NO, the comments
155# will behave just like regular Qt-style comments (thus requiring
156# an explicit \brief command for a brief description.)
157
158QT_AUTOBRIEF           = NO
159
160# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
161# treat a multi-line C++ special comment block (i.e. a block of //! or ///
162# comments) as a brief description. This used to be the default behaviour.
163# The new default is to treat a multi-line C++ comment block as a detailed
164# description. Set this tag to YES if you prefer the old behaviour instead.
165
166MULTILINE_CPP_IS_BRIEF = NO
167
168# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
169# member inherits the documentation from any documented member that it
170# re-implements.
171
172INHERIT_DOCS           = YES
173
174# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
175# a new page for each member. If set to NO, the documentation of a member will
176# be part of the file/class/namespace that contains it.
177
178SEPARATE_MEMBER_PAGES  = NO
179
180# The TAB_SIZE tag can be used to set the number of spaces in a tab.
181# Doxygen uses this value to replace tabs by spaces in code fragments.
182
183TAB_SIZE               = 8
184
185# This tag can be used to specify a number of aliases that acts
186# as commands in the documentation. An alias has the form "name=value".
187# For example adding "sideeffect=\par Side Effects:\n" will allow you to
188# put the command \sideeffect (or @sideeffect) in the documentation, which
189# will result in a user-defined paragraph with heading "Side Effects:".
190# You can put \n's in the value part of an alias to insert newlines.
191
192ALIASES                =
193
194# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
195# sources only. Doxygen will then generate output that is more tailored for C.
196# For instance, some of the names that are used will be different. The list
197# of all members will be omitted, etc.
198
199OPTIMIZE_OUTPUT_FOR_C  = NO
200
201# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
202# sources only. Doxygen will then generate output that is more tailored for
203# Java. For instance, namespaces will be presented as packages, qualified
204# scopes will look different, etc.
205
206OPTIMIZE_OUTPUT_JAVA   = NO
207
208# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
209# sources only. Doxygen will then generate output that is more tailored for
210# Fortran.
211
212OPTIMIZE_FOR_FORTRAN   = NO
213
214# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
215# sources. Doxygen will then generate output that is tailored for
216# VHDL.
217
218OPTIMIZE_OUTPUT_VHDL   = NO
219
220# Doxygen selects the parser to use depending on the extension of the files it parses.
221# With this tag you can assign which parser to use for a given extension.
222# Doxygen has a built-in mapping, but you can override or extend it using this tag.
223# The format is ext=language, where ext is a file extension, and language is one of
224# the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP,
225# Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat
226# .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran),
227# use: inc=Fortran f=C. Note that for custom extensions you also need to set
228# FILE_PATTERNS otherwise the files are not read by doxygen.
229
230EXTENSION_MAPPING      =
231
232# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
233# to include (a tag file for) the STL sources as input, then you should
234# set this tag to YES in order to let doxygen match functions declarations and
235# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
236# func(std::string) {}). This also make the inheritance and collaboration
237# diagrams that involve STL classes more complete and accurate.
238
239BUILTIN_STL_SUPPORT    = NO
240
241# If you use Microsoft's C++/CLI language, you should set this option to YES to
242# enable parsing support.
243
244CPP_CLI_SUPPORT        = NO
245
246# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
247# Doxygen will parse them like normal C++ but will assume all classes use public
248# instead of private inheritance when no explicit protection keyword is present.
249
250SIP_SUPPORT            = NO
251
252# For Microsoft's IDL there are propget and propput attributes to indicate getter
253# and setter methods for a property. Setting this option to YES (the default)
254# will make doxygen to replace the get and set methods by a property in the
255# documentation. This will only work if the methods are indeed getting or
256# setting a simple type. If this is not the case, or you want to show the
257# methods anyway, you should set this option to NO.
258
259IDL_PROPERTY_SUPPORT   = YES
260
261# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
262# tag is set to YES, then doxygen will reuse the documentation of the first
263# member in the group (if any) for the other members of the group. By default
264# all members of a group must be documented explicitly.
265
266DISTRIBUTE_GROUP_DOC   = NO
267
268# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
269# the same type (for instance a group of public functions) to be put as a
270# subgroup of that type (e.g. under the Public Functions section). Set it to
271# NO to prevent subgrouping. Alternatively, this can be done per class using
272# the \nosubgrouping command.
273
274SUBGROUPING            = YES
275
276# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
277# is documented as struct, union, or enum with the name of the typedef. So
278# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
279# with name TypeT. When disabled the typedef will appear as a member of a file,
280# namespace, or class. And the struct will be named TypeS. This can typically
281# be useful for C code in case the coding convention dictates that all compound
282# types are typedef'ed and only the typedef is referenced, never the tag name.
283
284TYPEDEF_HIDES_STRUCT   = NO
285
286# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
287# determine which symbols to keep in memory and which to flush to disk.
288# When the cache is full, less often used symbols will be written to disk.
289# For small to medium size projects (<1000 input files) the default value is
290# probably good enough. For larger projects a too small cache size can cause
291# doxygen to be busy swapping symbols to and from disk most of the time
292# causing a significant performance penality.
293# If the system has enough physical memory increasing the cache will improve the
294# performance by keeping more symbols in memory. Note that the value works on
295# a logarithmic scale so increasing the size by one will rougly double the
296# memory usage. The cache size is given by this formula:
297# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
298# corresponding to a cache size of 2^16 = 65536 symbols
299
300SYMBOL_CACHE_SIZE      = 0
301
302#---------------------------------------------------------------------------
303# Build related configuration options
304#---------------------------------------------------------------------------
305
306# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
307# documentation are documented, even if no documentation was available.
308# Private class members and static file members will be hidden unless
309# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
310
311EXTRACT_ALL            = YES
312
313# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
314# will be included in the documentation.
315
316EXTRACT_PRIVATE        = NO
317
318# If the EXTRACT_STATIC tag is set to YES all static members of a file
319# will be included in the documentation.
320
321EXTRACT_STATIC         = NO
322
323# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
324# defined locally in source files will be included in the documentation.
325# If set to NO only classes defined in header files are included.
326
327EXTRACT_LOCAL_CLASSES  = YES
328
329# This flag is only useful for Objective-C code. When set to YES local
330# methods, which are defined in the implementation section but not in
331# the interface are included in the documentation.
332# If set to NO (the default) only methods in the interface are included.
333
334EXTRACT_LOCAL_METHODS  = NO
335
336# If this flag is set to YES, the members of anonymous namespaces will be
337# extracted and appear in the documentation as a namespace called
338# 'anonymous_namespace{file}', where file will be replaced with the base
339# name of the file that contains the anonymous namespace. By default
340# anonymous namespace are hidden.
341
342EXTRACT_ANON_NSPACES   = NO
343
344# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
345# undocumented members of documented classes, files or namespaces.
346# If set to NO (the default) these members will be included in the
347# various overviews, but no documentation section is generated.
348# This option has no effect if EXTRACT_ALL is enabled.
349
350HIDE_UNDOC_MEMBERS     = NO
351
352# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
353# undocumented classes that are normally visible in the class hierarchy.
354# If set to NO (the default) these classes will be included in the various
355# overviews. This option has no effect if EXTRACT_ALL is enabled.
356
357HIDE_UNDOC_CLASSES     = NO
358
359# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
360# friend (class|struct|union) declarations.
361# If set to NO (the default) these declarations will be included in the
362# documentation.
363
364HIDE_FRIEND_COMPOUNDS  = NO
365
366# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
367# documentation blocks found inside the body of a function.
368# If set to NO (the default) these blocks will be appended to the
369# function's detailed documentation block.
370
371HIDE_IN_BODY_DOCS      = NO
372
373# The INTERNAL_DOCS tag determines if documentation
374# that is typed after a \internal command is included. If the tag is set
375# to NO (the default) then the documentation will be excluded.
376# Set it to YES to include the internal documentation.
377
378INTERNAL_DOCS          = NO
379
380# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
381# file names in lower-case letters. If set to YES upper-case letters are also
382# allowed. This is useful if you have classes or files whose names only differ
383# in case and if your file system supports case sensitive file names. Windows
384# and Mac users are advised to set this option to NO.
385
386CASE_SENSE_NAMES       = NO
387
388# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
389# will show members with their full class and namespace scopes in the
390# documentation. If set to YES the scope will be hidden.
391
392HIDE_SCOPE_NAMES       = NO
393
394# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
395# will put a list of the files that are included by a file in the documentation
396# of that file.
397
398SHOW_INCLUDE_FILES     = YES
399
400# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
401# will list include files with double quotes in the documentation
402# rather than with sharp brackets.
403
404FORCE_LOCAL_INCLUDES   = NO
405
406# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
407# is inserted in the documentation for inline members.
408
409INLINE_INFO            = YES
410
411# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
412# will sort the (detailed) documentation of file and class members
413# alphabetically by member name. If set to NO the members will appear in
414# declaration order.
415
416SORT_MEMBER_DOCS       = YES
417
418# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
419# brief documentation of file, namespace and class members alphabetically
420# by member name. If set to NO (the default) the members will appear in
421# declaration order.
422
423SORT_BRIEF_DOCS        = NO
424
425# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
426# will sort the (brief and detailed) documentation of class members so that
427# constructors and destructors are listed first. If set to NO (the default)
428# the constructors will appear in the respective orders defined by
429# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
430# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
431# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
432
433SORT_MEMBERS_CTORS_1ST = NO
434
435# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
436# hierarchy of group names into alphabetical order. If set to NO (the default)
437# the group names will appear in their defined order.
438
439SORT_GROUP_NAMES       = NO
440
441# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
442# sorted by fully-qualified names, including namespaces. If set to
443# NO (the default), the class list will be sorted only by class name,
444# not including the namespace part.
445# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
446# Note: This option applies only to the class list, not to the
447# alphabetical list.
448
449SORT_BY_SCOPE_NAME     = NO
450
451# The GENERATE_TODOLIST tag can be used to enable (YES) or
452# disable (NO) the todo list. This list is created by putting \todo
453# commands in the documentation.
454
455GENERATE_TODOLIST      = YES
456
457# The GENERATE_TESTLIST tag can be used to enable (YES) or
458# disable (NO) the test list. This list is created by putting \test
459# commands in the documentation.
460
461GENERATE_TESTLIST      = YES
462
463# The GENERATE_BUGLIST tag can be used to enable (YES) or
464# disable (NO) the bug list. This list is created by putting \bug
465# commands in the documentation.
466
467GENERATE_BUGLIST       = YES
468
469# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
470# disable (NO) the deprecated list. This list is created by putting
471# \deprecated commands in the documentation.
472
473GENERATE_DEPRECATEDLIST= YES
474
475# The ENABLED_SECTIONS tag can be used to enable conditional
476# documentation sections, marked by \if sectionname ... \endif.
477
478ENABLED_SECTIONS       =
479
480# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
481# the initial value of a variable or define consists of for it to appear in
482# the documentation. If the initializer consists of more lines than specified
483# here it will be hidden. Use a value of 0 to hide initializers completely.
484# The appearance of the initializer of individual variables and defines in the
485# documentation can be controlled using \showinitializer or \hideinitializer
486# command in the documentation regardless of this setting.
487
488MAX_INITIALIZER_LINES  = 30
489
490# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
491# at the bottom of the documentation of classes and structs. If set to YES the
492# list will mention the files that were used to generate the documentation.
493
494SHOW_USED_FILES        = YES
495
496# If the sources in your project are distributed over multiple directories
497# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
498# in the documentation. The default is NO.
499
500SHOW_DIRECTORIES       = NO
501
502# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
503# This will remove the Files entry from the Quick Index and from the
504# Folder Tree View (if specified). The default is YES.
505
506SHOW_FILES             = YES
507
508# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
509# Namespaces page.  This will remove the Namespaces entry from the Quick Index
510# and from the Folder Tree View (if specified). The default is YES.
511
512SHOW_NAMESPACES        = YES
513
514# The FILE_VERSION_FILTER tag can be used to specify a program or script that
515# doxygen should invoke to get the current version for each file (typically from
516# the version control system). Doxygen will invoke the program by executing (via
517# popen()) the command <command> <input-file>, where <command> is the value of
518# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
519# provided by doxygen. Whatever the program writes to standard output
520# is used as the file version. See the manual for examples.
521
522FILE_VERSION_FILTER    =
523
524# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by
525# doxygen. The layout file controls the global structure of the generated output files
526# in an output format independent way. The create the layout file that represents
527# doxygen's defaults, run doxygen with the -l option. You can optionally specify a
528# file name after the option, if omitted DoxygenLayout.xml will be used as the name
529# of the layout file.
530
531LAYOUT_FILE            =
532
533#---------------------------------------------------------------------------
534# configuration options related to warning and progress messages
535#---------------------------------------------------------------------------
536
537# The QUIET tag can be used to turn on/off the messages that are generated
538# by doxygen. Possible values are YES and NO. If left blank NO is used.
539
540QUIET                  = NO
541
542# The WARNINGS tag can be used to turn on/off the warning messages that are
543# generated by doxygen. Possible values are YES and NO. If left blank
544# NO is used.
545
546WARNINGS               = YES
547
548# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
549# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
550# automatically be disabled.
551
552WARN_IF_UNDOCUMENTED   = YES
553
554# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
555# potential errors in the documentation, such as not documenting some
556# parameters in a documented function, or documenting parameters that
557# don't exist or using markup commands wrongly.
558
559WARN_IF_DOC_ERROR      = YES
560
561# This WARN_NO_PARAMDOC option can be abled to get warnings for
562# functions that are documented, but have no documentation for their parameters
563# or return value. If set to NO (the default) doxygen will only warn about
564# wrong or incomplete parameter documentation, but not about the absence of
565# documentation.
566
567WARN_NO_PARAMDOC       = YES
568
569# The WARN_FORMAT tag determines the format of the warning messages that
570# doxygen can produce. The string should contain the $file, $line, and $text
571# tags, which will be replaced by the file and line number from which the
572# warning originated and the warning text. Optionally the format may contain
573# $version, which will be replaced by the version of the file (if it could
574# be obtained via FILE_VERSION_FILTER)
575
576WARN_FORMAT            = "$file:$line: $text"
577
578# The WARN_LOGFILE tag can be used to specify a file to which warning
579# and error messages should be written. If left blank the output is written
580# to stderr.
581
582WARN_LOGFILE           =
583
584#---------------------------------------------------------------------------
585# configuration options related to the input files
586#---------------------------------------------------------------------------
587
588# The INPUT tag can be used to specify the files and/or directories that contain
589# documented source files. You may enter file names like "myfile.cpp" or
590# directories like "/usr/src/myproject". Separate the files or directories
591# with spaces.
592
593INPUT                  = ./include
594
595# This tag can be used to specify the character encoding of the source files
596# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
597# also the default input encoding. Doxygen uses libiconv (or the iconv built
598# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
599# the list of possible encodings.
600
601INPUT_ENCODING         = UTF-8
602
603# If the value of the INPUT tag contains directories, you can use the
604# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
605# and *.h) to filter out the source-files in the directories. If left
606# blank the following patterns are tested:
607# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
608# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
609
610FILE_PATTERNS          = *.c \
611                         *.cc \
612                         *.cxx \
613                         *.cpp \
614                         *.c++ \
615                         *.d \
616                         *.java \
617                         *.ii \
618                         *.ixx \
619                         *.ipp \
620                         *.i++ \
621                         *.inl \
622                         *.h \
623                         *.hh \
624                         *.hxx \
625                         *.hpp \
626                         *.h++ \
627                         *.idl \
628                         *.odl \
629                         *.cs \
630                         *.php \
631                         *.php3 \
632                         *.inc \
633                         *.m \
634                         *.mm \
635                         *.dox \
636                         *.py \
637                         *.f90 \
638                         *.f \
639                         *.vhd \
640                         *.vhdl
641
642# The RECURSIVE tag can be used to turn specify whether or not subdirectories
643# should be searched for input files as well. Possible values are YES and NO.
644# If left blank NO is used.
645
646RECURSIVE              = YES
647
648# The EXCLUDE tag can be used to specify files and/or directories that should
649# excluded from the INPUT source files. This way you can easily exclude a
650# subdirectory from a directory tree whose root is specified with the INPUT tag.
651
652EXCLUDE                = include/cluster/enet/callbacks.h \
653                         include/cluster/enet/enet.h \
654                         include/cluster/enet/list.h \
655                         include/cluster/enet/protocol.h \
656                         include/cluster/enet/time.h \
657                         include/cluster/enet/types.h \
658                         include/cluster/enet/unix.h \
659                         include/cluster/enet/utility.h \
660                         include/cluster/enet/win32.h \
661                         src/cluster/enet/callbacks.c \
662                         src/cluster/enet/compress.c \
663                         src/cluster/enet/host.c \
664                         src/cluster/enet/list.c \
665                         src/cluster/enet/packet.c \
666                         src/cluster/enet/peer.c \
667                         src/cluster/enet/protocol.c \
668                         src/cluster/enet/unix.c \
669                         src/cluster/enet/win32.c
670
671# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
672# directories that are symbolic links (a Unix filesystem feature) are excluded
673# from the input.
674
675EXCLUDE_SYMLINKS       = NO
676
677# If the value of the INPUT tag contains directories, you can use the
678# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
679# certain files from those directories. Note that the wildcards are matched
680# against the file with absolute path, so to exclude all test directories
681# for example use the pattern */test/*
682
683EXCLUDE_PATTERNS       =
684
685# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
686# (namespaces, classes, functions, etc.) that should be excluded from the
687# output. The symbol name can be a fully qualified name, a word, or if the
688# wildcard * is used, a substring. Examples: ANamespace, AClass,
689# AClass::ANamespace, ANamespace::*Test
690
691EXCLUDE_SYMBOLS        =
692
693# The EXAMPLE_PATH tag can be used to specify one or more files or
694# directories that contain example code fragments that are included (see
695# the \include command).
696
697EXAMPLE_PATH           =
698
699# If the value of the EXAMPLE_PATH tag contains directories, you can use the
700# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
701# and *.h) to filter out the source-files in the directories. If left
702# blank all files are included.
703
704EXAMPLE_PATTERNS       = *
705
706# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
707# searched for input files to be used with the \include or \dontinclude
708# commands irrespective of the value of the RECURSIVE tag.
709# Possible values are YES and NO. If left blank NO is used.
710
711EXAMPLE_RECURSIVE      = NO
712
713# The IMAGE_PATH tag can be used to specify one or more files or
714# directories that contain image that are included in the documentation (see
715# the \image command).
716
717IMAGE_PATH             =
718
719# The INPUT_FILTER tag can be used to specify a program that doxygen should
720# invoke to filter for each input file. Doxygen will invoke the filter program
721# by executing (via popen()) the command <filter> <input-file>, where <filter>
722# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
723# input file. Doxygen will then use the output that the filter program writes
724# to standard output.  If FILTER_PATTERNS is specified, this tag will be
725# ignored.
726
727INPUT_FILTER           =
728
729# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
730# basis.  Doxygen will compare the file name with each pattern and apply the
731# filter if there is a match.  The filters are a list of the form:
732# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
733# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
734# is applied to all files.
735
736FILTER_PATTERNS        =
737
738# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
739# INPUT_FILTER) will be used to filter the input files when producing source
740# files to browse (i.e. when SOURCE_BROWSER is set to YES).
741
742FILTER_SOURCE_FILES    = NO
743
744#---------------------------------------------------------------------------
745# configuration options related to source browsing
746#---------------------------------------------------------------------------
747
748# If the SOURCE_BROWSER tag is set to YES then a list of source files will
749# be generated. Documented entities will be cross-referenced with these sources.
750# Note: To get rid of all source code in the generated output, make sure also
751# VERBATIM_HEADERS is set to NO.
752
753SOURCE_BROWSER         = NO
754
755# Setting the INLINE_SOURCES tag to YES will include the body
756# of functions and classes directly in the documentation.
757
758INLINE_SOURCES         = NO
759
760# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
761# doxygen to hide any special comment blocks from generated source code
762# fragments. Normal C and C++ comments will always remain visible.
763
764STRIP_CODE_COMMENTS    = YES
765
766# If the REFERENCED_BY_RELATION tag is set to YES
767# then for each documented function all documented
768# functions referencing it will be listed.
769
770REFERENCED_BY_RELATION = NO
771
772# If the REFERENCES_RELATION tag is set to YES
773# then for each documented function all documented entities
774# called/used by that function will be listed.
775
776REFERENCES_RELATION    = NO
777
778# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
779# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
780# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
781# link to the source code.  Otherwise they will link to the documentation.
782
783REFERENCES_LINK_SOURCE = YES
784
785# If the USE_HTAGS tag is set to YES then the references to source code
786# will point to the HTML generated by the htags(1) tool instead of doxygen
787# built-in source browser. The htags tool is part of GNU's global source
788# tagging system (see http://www.gnu.org/software/global/global.html). You
789# will need version 4.8.6 or higher.
790
791USE_HTAGS              = NO
792
793# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
794# will generate a verbatim copy of the header file for each class for
795# which an include is specified. Set to NO to disable this.
796
797VERBATIM_HEADERS       = YES
798
799#---------------------------------------------------------------------------
800# configuration options related to the alphabetical class index
801#---------------------------------------------------------------------------
802
803# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
804# of all compounds will be generated. Enable this if the project
805# contains a lot of classes, structs, unions or interfaces.
806
807ALPHABETICAL_INDEX     = NO
808
809# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
810# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
811# in which this list will be split (can be a number in the range [1..20])
812
813COLS_IN_ALPHA_INDEX    = 5
814
815# In case all classes in a project start with a common prefix, all
816# classes will be put under the same header in the alphabetical index.
817# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
818# should be ignored while generating the index headers.
819
820IGNORE_PREFIX          =
821
822#---------------------------------------------------------------------------
823# configuration options related to the HTML output
824#---------------------------------------------------------------------------
825
826# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
827# generate HTML output.
828
829GENERATE_HTML          = YES
830
831# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
832# If a relative path is entered the value of OUTPUT_DIRECTORY will be
833# put in front of it. If left blank `html' will be used as the default path.
834
835HTML_OUTPUT            = html
836
837# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
838# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
839# doxygen will generate files with .html extension.
840
841HTML_FILE_EXTENSION    = .html
842
843# The HTML_HEADER tag can be used to specify a personal HTML header for
844# each generated HTML page. If it is left blank doxygen will generate a
845# standard header.
846
847HTML_HEADER            =
848
849# The HTML_FOOTER tag can be used to specify a personal HTML footer for
850# each generated HTML page. If it is left blank doxygen will generate a
851# standard footer.
852
853HTML_FOOTER            =
854
855# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
856# style sheet that is used by each HTML page. It can be used to
857# fine-tune the look of the HTML output. If the tag is left blank doxygen
858# will generate a default style sheet. Note that doxygen will try to copy
859# the style sheet file to the HTML output directory, so don't put your own
860# stylesheet in the HTML output directory as well, or it will be erased!
861
862HTML_STYLESHEET        =
863
864# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
865# page will contain the date and time when the page was generated. Setting
866# this to NO can help when comparing the output of multiple runs.
867
868HTML_TIMESTAMP         = YES
869
870# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
871# files or namespaces will be aligned in HTML using tables. If set to
872# NO a bullet list will be used.
873
874HTML_ALIGN_MEMBERS     = YES
875
876# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
877# documentation will contain sections that can be hidden and shown after the
878# page has loaded. For this to work a browser that supports
879# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
880# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
881
882HTML_DYNAMIC_SECTIONS  = NO
883
884# If the GENERATE_DOCSET tag is set to YES, additional index files
885# will be generated that can be used as input for Apple's Xcode 3
886# integrated development environment, introduced with OSX 10.5 (Leopard).
887# To create a documentation set, doxygen will generate a Makefile in the
888# HTML output directory. Running make will produce the docset in that
889# directory and running "make install" will install the docset in
890# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
891# it at startup.
892# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information.
893
894GENERATE_DOCSET        = NO
895
896# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
897# feed. A documentation feed provides an umbrella under which multiple
898# documentation sets from a single provider (such as a company or product suite)
899# can be grouped.
900
901DOCSET_FEEDNAME        = "Doxygen generated docs"
902
903# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
904# should uniquely identify the documentation set bundle. This should be a
905# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
906# will append .docset to the name.
907
908DOCSET_BUNDLE_ID       = org.doxygen.Project
909
910# If the GENERATE_HTMLHELP tag is set to YES, additional index files
911# will be generated that can be used as input for tools like the
912# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
913# of the generated HTML documentation.
914
915GENERATE_HTMLHELP      = NO
916
917# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
918# be used to specify the file name of the resulting .chm file. You
919# can add a path in front of the file if the result should not be
920# written to the html output directory.
921
922CHM_FILE               =
923
924# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
925# be used to specify the location (absolute path including file name) of
926# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
927# the HTML help compiler on the generated index.hhp.
928
929HHC_LOCATION           =
930
931# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
932# controls if a separate .chi index file is generated (YES) or that
933# it should be included in the master .chm file (NO).
934
935GENERATE_CHI           = NO
936
937# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
938# is used to encode HtmlHelp index (hhk), content (hhc) and project file
939# content.
940
941CHM_INDEX_ENCODING     =
942
943# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
944# controls whether a binary table of contents is generated (YES) or a
945# normal table of contents (NO) in the .chm file.
946
947BINARY_TOC             = NO
948
949# The TOC_EXPAND flag can be set to YES to add extra items for group members
950# to the contents of the HTML help documentation and to the tree view.
951
952TOC_EXPAND             = NO
953
954# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER
955# are set, an additional index file will be generated that can be used as input for
956# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated
957# HTML documentation.
958
959GENERATE_QHP           = NO
960
961# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
962# be used to specify the file name of the resulting .qch file.
963# The path specified is relative to the HTML output folder.
964
965QCH_FILE               =
966
967# The QHP_NAMESPACE tag specifies the namespace to use when generating
968# Qt Help Project output. For more information please see
969# http://doc.trolltech.com/qthelpproject.html#namespace
970
971QHP_NAMESPACE          = org.doxygen.Project
972
973# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
974# Qt Help Project output. For more information please see
975# http://doc.trolltech.com/qthelpproject.html#virtual-folders
976
977QHP_VIRTUAL_FOLDER     = doc
978
979# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add.
980# For more information please see
981# http://doc.trolltech.com/qthelpproject.html#custom-filters
982
983QHP_CUST_FILTER_NAME   =
984
985# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see
986# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">Qt Help Project / Custom Filters</a>.
987
988QHP_CUST_FILTER_ATTRS  =
989
990# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's
991# filter section matches.
992# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">Qt Help Project / Filter Attributes</a>.
993
994QHP_SECT_FILTER_ATTRS  =
995
996# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
997# be used to specify the location of Qt's qhelpgenerator.
998# If non-empty doxygen will try to run qhelpgenerator on the generated
999# .qhp file.
1000
1001QHG_LOCATION           =
1002
1003# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files 
1004# will be generated, which together with the HTML files, form an Eclipse help 
1005# plugin. To install this plugin and make it available under the help contents
1006# menu in Eclipse, the contents of the directory containing the HTML and XML
1007# files needs to be copied into the plugins directory of eclipse. The name of
1008# the directory within the plugins directory should be the same as
1009# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
1010# the help appears.
1011
1012GENERATE_ECLIPSEHELP   = NO
1013
1014# A unique identifier for the eclipse help plugin. When installing the plugin
1015# the directory name containing the HTML and XML files should also have
1016# this name.
1017
1018ECLIPSE_DOC_ID         = org.doxygen.Project
1019
1020# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
1021# top of each HTML page. The value NO (the default) enables the index and
1022# the value YES disables it.
1023
1024DISABLE_INDEX          = NO
1025
1026# This tag can be used to set the number of enum values (range [1..20])
1027# that doxygen will group on one line in the generated HTML documentation.
1028
1029ENUM_VALUES_PER_LINE   = 4
1030
1031# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
1032# structure should be generated to display hierarchical information.
1033# If the tag value is set to YES, a side panel will be generated
1034# containing a tree-like index structure (just like the one that
1035# is generated for HTML Help). For this to work a browser that supports
1036# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
1037# Windows users are probably better off using the HTML help feature.
1038
1039GENERATE_TREEVIEW      = NO
1040
1041# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
1042# and Class Hierarchy pages using a tree view instead of an ordered list.
1043
1044USE_INLINE_TREES       = NO
1045
1046# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
1047# used to set the initial width (in pixels) of the frame in which the tree
1048# is shown.
1049
1050TREEVIEW_WIDTH         = 250
1051
1052# Use this tag to change the font size of Latex formulas included
1053# as images in the HTML documentation. The default is 10. Note that
1054# when you change the font size after a successful doxygen run you need
1055# to manually remove any form_*.png images from the HTML output directory
1056# to force them to be regenerated.
1057
1058FORMULA_FONTSIZE       = 10
1059
1060# When the SEARCHENGINE tag is enabled doxygen will generate a search box
1061# for the HTML output. The underlying search engine uses javascript
1062# and DHTML and should work on any modern browser. Note that when using
1063# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
1064# (GENERATE_DOCSET) there is already a search function so this one should
1065# typically be disabled. For large projects the javascript based search engine
1066# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
1067
1068SEARCHENGINE           = NO
1069
1070# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
1071# implemented using a PHP enabled web server instead of at the web client
1072# using Javascript. Doxygen will generate the search PHP script and index
1073# file to put on the web server. The advantage of the server
1074# based approach is that it scales better to large projects and allows
1075# full text search. The disadvances is that it is more difficult to setup
1076# and does not have live searching capabilities.
1077
1078SERVER_BASED_SEARCH    = NO
1079
1080#---------------------------------------------------------------------------
1081# configuration options related to the LaTeX output
1082#---------------------------------------------------------------------------
1083
1084# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
1085# generate Latex output.
1086
1087GENERATE_LATEX         = YES
1088
1089# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
1090# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1091# put in front of it. If left blank `latex' will be used as the default path.
1092
1093LATEX_OUTPUT           = latex
1094
1095# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
1096# invoked. If left blank `latex' will be used as the default command name.
1097# Note that when enabling USE_PDFLATEX this option is only used for
1098# generating bitmaps for formulas in the HTML output, but not in the
1099# Makefile that is written to the output directory.
1100
1101LATEX_CMD_NAME         = latex
1102
1103# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
1104# generate index for LaTeX. If left blank `makeindex' will be used as the
1105# default command name.
1106
1107MAKEINDEX_CMD_NAME     = makeindex
1108
1109# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
1110# LaTeX documents. This may be useful for small projects and may help to
1111# save some trees in general.
1112
1113COMPACT_LATEX          = NO
1114
1115# The PAPER_TYPE tag can be used to set the paper type that is used
1116# by the printer. Possible values are: a4, a4wide, letter, legal and
1117# executive. If left blank a4wide will be used.
1118
1119PAPER_TYPE             = a4wide
1120
1121# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
1122# packages that should be included in the LaTeX output.
1123
1124EXTRA_PACKAGES         =
1125
1126# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
1127# the generated latex document. The header should contain everything until
1128# the first chapter. If it is left blank doxygen will generate a
1129# standard header. Notice: only use this tag if you know what you are doing!
1130
1131LATEX_HEADER           =
1132
1133# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
1134# is prepared for conversion to pdf (using ps2pdf). The pdf file will
1135# contain links (just like the HTML output) instead of page references
1136# This makes the output suitable for online browsing using a pdf viewer.
1137
1138PDF_HYPERLINKS         = YES
1139
1140# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
1141# plain latex in the generated Makefile. Set this option to YES to get a
1142# higher quality PDF documentation.
1143
1144USE_PDFLATEX           = YES
1145
1146# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
1147# command to the generated LaTeX files. This will instruct LaTeX to keep
1148# running if errors occur, instead of asking the user for help.
1149# This option is also used when generating formulas in HTML.
1150
1151LATEX_BATCHMODE        = NO
1152
1153# If LATEX_HIDE_INDICES is set to YES then doxygen will not
1154# include the index chapters (such as File Index, Compound Index, etc.)
1155# in the output.
1156
1157LATEX_HIDE_INDICES     = NO
1158
1159# If LATEX_SOURCE_CODE is set to YES then doxygen will include
1160# source code with syntax highlighting in the LaTeX output.
1161# Note that which sources are shown also depends on other settings
1162# such as SOURCE_BROWSER.
1163
1164LATEX_SOURCE_CODE      = NO
1165
1166#---------------------------------------------------------------------------
1167# configuration options related to the RTF output
1168#---------------------------------------------------------------------------
1169
1170# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
1171# The RTF output is optimized for Word 97 and may not look very pretty with
1172# other RTF readers or editors.
1173
1174GENERATE_RTF           = NO
1175
1176# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
1177# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1178# put in front of it. If left blank `rtf' will be used as the default path.
1179
1180RTF_OUTPUT             = rtf
1181
1182# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
1183# RTF documents. This may be useful for small projects and may help to
1184# save some trees in general.
1185
1186COMPACT_RTF            = NO
1187
1188# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
1189# will contain hyperlink fields. The RTF file will
1190# contain links (just like the HTML output) instead of page references.
1191# This makes the output suitable for online browsing using WORD or other
1192# programs which support those fields.
1193# Note: wordpad (write) and others do not support links.
1194
1195RTF_HYPERLINKS         = NO
1196
1197# Load stylesheet definitions from file. Syntax is similar to doxygen's
1198# config file, i.e. a series of assignments. You only have to provide
1199# replacements, missing definitions are set to their default value.
1200
1201RTF_STYLESHEET_FILE    =
1202
1203# Set optional variables used in the generation of an rtf document.
1204# Syntax is similar to doxygen's config file.
1205
1206RTF_EXTENSIONS_FILE    =
1207
1208#---------------------------------------------------------------------------
1209# configuration options related to the man page output
1210#---------------------------------------------------------------------------
1211
1212# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
1213# generate man pages
1214
1215GENERATE_MAN           = NO
1216
1217# The MAN_OUTPUT tag is used to specify where the man pages will be put.
1218# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1219# put in front of it. If left blank `man' will be used as the default path.
1220
1221MAN_OUTPUT             = man
1222
1223# The MAN_EXTENSION tag determines the extension that is added to
1224# the generated man pages (default is the subroutine's section .3)
1225
1226MAN_EXTENSION          = .3
1227
1228# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
1229# then it will generate one additional man file for each entity
1230# documented in the real man page(s). These additional files
1231# only source the real man page, but without them the man command
1232# would be unable to find the correct page. The default is NO.
1233
1234MAN_LINKS              = NO
1235
1236#---------------------------------------------------------------------------
1237# configuration options related to the XML output
1238#---------------------------------------------------------------------------
1239
1240# If the GENERATE_XML tag is set to YES Doxygen will
1241# generate an XML file that captures the structure of
1242# the code including all documentation.
1243
1244GENERATE_XML           = NO
1245
1246# The XML_OUTPUT tag is used to specify where the XML pages will be put.
1247# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1248# put in front of it. If left blank `xml' will be used as the default path.
1249
1250XML_OUTPUT             = xml
1251
1252# The XML_SCHEMA tag can be used to specify an XML schema,
1253# which can be used by a validating XML parser to check the
1254# syntax of the XML files.
1255
1256XML_SCHEMA             =
1257
1258# The XML_DTD tag can be used to specify an XML DTD,
1259# which can be used by a validating XML parser to check the
1260# syntax of the XML files.
1261
1262XML_DTD                =
1263
1264# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
1265# dump the program listings (including syntax highlighting
1266# and cross-referencing information) to the XML output. Note that
1267# enabling this will significantly increase the size of the XML output.
1268
1269XML_PROGRAMLISTING     = YES
1270
1271#---------------------------------------------------------------------------
1272# configuration options for the AutoGen Definitions output
1273#---------------------------------------------------------------------------
1274
1275# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
1276# generate an AutoGen Definitions (see autogen.sf.net) file
1277# that captures the structure of the code including all
1278# documentation. Note that this feature is still experimental
1279# and incomplete at the moment.
1280
1281GENERATE_AUTOGEN_DEF   = NO
1282
1283#---------------------------------------------------------------------------
1284# configuration options related to the Perl module output
1285#---------------------------------------------------------------------------
1286
1287# If the GENERATE_PERLMOD tag is set to YES Doxygen will
1288# generate a Perl module file that captures the structure of
1289# the code including all documentation. Note that this
1290# feature is still experimental and incomplete at the
1291# moment.
1292
1293GENERATE_PERLMOD       = NO
1294
1295# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
1296# the necessary Makefile rules, Perl scripts and LaTeX code to be able
1297# to generate PDF and DVI output from the Perl module output.
1298
1299PERLMOD_LATEX          = NO
1300
1301# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
1302# nicely formatted so it can be parsed by a human reader.  This is useful
1303# if you want to understand what is going on.  On the other hand, if this
1304# tag is set to NO the size of the Perl module output will be much smaller
1305# and Perl will parse it just the same.
1306
1307PERLMOD_PRETTY         = YES
1308
1309# The names of the make variables in the generated doxyrules.make file
1310# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
1311# This is useful so different doxyrules.make files included by the same
1312# Makefile don't overwrite each other's variables.
1313
1314PERLMOD_MAKEVAR_PREFIX =
1315
1316#---------------------------------------------------------------------------
1317# Configuration options related to the preprocessor
1318#---------------------------------------------------------------------------
1319
1320# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
1321# evaluate all C-preprocessor directives found in the sources and include
1322# files.
1323
1324ENABLE_PREPROCESSING   = YES
1325
1326# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
1327# names in the source code. If set to NO (the default) only conditional
1328# compilation will be performed. Macro expansion can be done in a controlled
1329# way by setting EXPAND_ONLY_PREDEF to YES.
1330
1331MACRO_EXPANSION        = NO
1332
1333# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
1334# then the macro expansion is limited to the macros specified with the
1335# PREDEFINED and EXPAND_AS_DEFINED tags.
1336
1337EXPAND_ONLY_PREDEF     = NO
1338
1339# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
1340# in the INCLUDE_PATH (see below) will be search if a #include is found.
1341
1342SEARCH_INCLUDES        = YES
1343
1344# The INCLUDE_PATH tag can be used to specify one or more directories that
1345# contain include files that are not input files but should be processed by
1346# the preprocessor.
1347
1348INCLUDE_PATH           =
1349
1350# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
1351# patterns (like *.h and *.hpp) to filter out the header-files in the
1352# directories. If left blank, the patterns specified with FILE_PATTERNS will
1353# be used.
1354
1355INCLUDE_FILE_PATTERNS  =
1356
1357# The PREDEFINED tag can be used to specify one or more macro names that
1358# are defined before the preprocessor is started (similar to the -D option of
1359# gcc). The argument of the tag is a list of macros of the form: name
1360# or name=definition (no spaces). If the definition and the = are
1361# omitted =1 is assumed. To prevent a macro definition from being
1362# undefined via #undef or recursively expanded use the := operator
1363# instead of the = operator.
1364
1365PREDEFINED             =
1366
1367# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
1368# this tag can be used to specify a list of macro names that should be expanded.
1369# The macro definition that is found in the sources will be used.
1370# Use the PREDEFINED tag if you want to use a different macro definition.
1371
1372EXPAND_AS_DEFINED      =
1373
1374# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
1375# doxygen's preprocessor will remove all function-like macros that are alone
1376# on a line, have an all uppercase name, and do not end with a semicolon. Such
1377# function macros are typically used for boiler-plate code, and will confuse
1378# the parser if not removed.
1379
1380SKIP_FUNCTION_MACROS   = YES
1381
1382#---------------------------------------------------------------------------
1383# Configuration::additions related to external references
1384#---------------------------------------------------------------------------
1385
1386# The TAGFILES option can be used to specify one or more tagfiles.
1387# Optionally an initial location of the external documentation
1388# can be added for each tagfile. The format of a tag file without
1389# this location is as follows:
1390#   TAGFILES = file1 file2 ...
1391# Adding location for the tag files is done as follows:
1392#   TAGFILES = file1=loc1 "file2 = loc2" ...
1393# where "loc1" and "loc2" can be relative or absolute paths or
1394# URLs. If a location is present for each tag, the installdox tool
1395# does not have to be run to correct the links.
1396# Note that each tag file must have a unique name
1397# (where the name does NOT include the path)
1398# If a tag file is not located in the directory in which doxygen
1399# is run, you must also specify the path to the tagfile here.
1400
1401TAGFILES               =
1402
1403# When a file name is specified after GENERATE_TAGFILE, doxygen will create
1404# a tag file that is based on the input files it reads.
1405
1406GENERATE_TAGFILE       =
1407
1408# If the ALLEXTERNALS tag is set to YES all external classes will be listed
1409# in the class index. If set to NO only the inherited external classes
1410# will be listed.
1411
1412ALLEXTERNALS           = NO
1413
1414# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
1415# in the modules index. If set to NO, only the current project's groups will
1416# be listed.
1417
1418EXTERNAL_GROUPS        = YES
1419
1420# The PERL_PATH should be the absolute path and name of the perl script
1421# interpreter (i.e. the result of `which perl').
1422
1423PERL_PATH              = /usr/bin/perl
1424
1425#---------------------------------------------------------------------------
1426# Configuration options related to the dot tool
1427#---------------------------------------------------------------------------
1428
1429# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
1430# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
1431# or super classes. Setting the tag to NO turns the diagrams off. Note that
1432# this option is superseded by the HAVE_DOT option below. This is only a
1433# fallback. It is recommended to install and use dot, since it yields more
1434# powerful graphs.
1435
1436CLASS_DIAGRAMS         = YES
1437
1438# You can define message sequence charts within doxygen comments using the \msc
1439# command. Doxygen will then run the mscgen tool (see
1440# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
1441# documentation. The MSCGEN_PATH tag allows you to specify the directory where
1442# the mscgen tool resides. If left empty the tool is assumed to be found in the
1443# default search path.
1444
1445MSCGEN_PATH            =
1446
1447# If set to YES, the inheritance and collaboration graphs will hide
1448# inheritance and usage relations if the target is undocumented
1449# or is not a class.
1450
1451HIDE_UNDOC_RELATIONS   = YES
1452
1453# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
1454# available from the path. This tool is part of Graphviz, a graph visualization
1455# toolkit from AT&T and Lucent Bell Labs. The other options in this section
1456# have no effect if this option is set to NO (the default)
1457
1458HAVE_DOT               = NO
1459
1460# By default doxygen will write a font called FreeSans.ttf to the output
1461# directory and reference it in all dot files that doxygen generates. This
1462# font does not include all possible unicode characters however, so when you need
1463# these (or just want a differently looking font) you can specify the font name
1464# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
1465# which can be done by putting it in a standard location or by setting the
1466# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
1467# containing the font.
1468
1469DOT_FONTNAME           = FreeSans
1470
1471# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
1472# The default size is 10pt.
1473
1474DOT_FONTSIZE           = 10
1475
1476# By default doxygen will tell dot to use the output directory to look for the
1477# FreeSans.ttf font (which doxygen will put there itself). If you specify a
1478# different font using DOT_FONTNAME you can set the path where dot
1479# can find it using this tag.
1480
1481DOT_FONTPATH           =
1482
1483# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
1484# will generate a graph for each documented class showing the direct and
1485# indirect inheritance relations. Setting this tag to YES will force the
1486# the CLASS_DIAGRAMS tag to NO.
1487
1488CLASS_GRAPH            = YES
1489
1490# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
1491# will generate a graph for each documented class showing the direct and
1492# indirect implementation dependencies (inheritance, containment, and
1493# class references variables) of the class with other documented classes.
1494
1495COLLABORATION_GRAPH    = YES
1496
1497# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
1498# will generate a graph for groups, showing the direct groups dependencies
1499
1500GROUP_GRAPHS           = YES
1501
1502# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
1503# collaboration diagrams in a style similar to the OMG's Unified Modeling
1504# Language.
1505
1506UML_LOOK               = NO
1507
1508# If set to YES, the inheritance and collaboration graphs will show the
1509# relations between templates and their instances.
1510
1511TEMPLATE_RELATIONS     = NO
1512
1513# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
1514# tags are set to YES then doxygen will generate a graph for each documented
1515# file showing the direct and indirect include dependencies of the file with
1516# other documented files.
1517
1518INCLUDE_GRAPH          = YES
1519
1520# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1521# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1522# documented header file showing the documented files that directly or
1523# indirectly include this file.
1524
1525INCLUDED_BY_GRAPH      = YES
1526
1527# If the CALL_GRAPH and HAVE_DOT options are set to YES then
1528# doxygen will generate a call dependency graph for every global function
1529# or class method. Note that enabling this option will significantly increase
1530# the time of a run. So in most cases it will be better to enable call graphs
1531# for selected functions only using the \callgraph command.
1532
1533CALL_GRAPH             = NO
1534
1535# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
1536# doxygen will generate a caller dependency graph for every global function
1537# or class method. Note that enabling this option will significantly increase
1538# the time of a run. So in most cases it will be better to enable caller
1539# graphs for selected functions only using the \callergraph command.
1540
1541CALLER_GRAPH           = NO
1542
1543# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1544# will graphical hierarchy of all classes instead of a textual one.
1545
1546GRAPHICAL_HIERARCHY    = YES
1547
1548# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
1549# then doxygen will show the dependencies a directory has on other directories
1550# in a graphical way. The dependency relations are determined by the #include
1551# relations between the files in the directories.
1552
1553DIRECTORY_GRAPH        = YES
1554
1555# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1556# generated by dot. Possible values are png, jpg, or gif
1557# If left blank png will be used.
1558
1559DOT_IMAGE_FORMAT       = png
1560
1561# The tag DOT_PATH can be used to specify the path where the dot tool can be
1562# found. If left blank, it is assumed the dot tool can be found in the path.
1563
1564DOT_PATH               =
1565
1566# The DOTFILE_DIRS tag can be used to specify one or more directories that
1567# contain dot files that are included in the documentation (see the
1568# \dotfile command).
1569
1570DOTFILE_DIRS           =
1571
1572# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
1573# nodes that will be shown in the graph. If the number of nodes in a graph
1574# becomes larger than this value, doxygen will truncate the graph, which is
1575# visualized by representing a node as a red box. Note that doxygen if the
1576# number of direct children of the root node in a graph is already larger than
1577# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
1578# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
1579
1580DOT_GRAPH_MAX_NODES    = 50
1581
1582# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1583# graphs generated by dot. A depth value of 3 means that only nodes reachable
1584# from the root by following a path via at most 3 edges will be shown. Nodes
1585# that lay further from the root node will be omitted. Note that setting this
1586# option to 1 or 2 may greatly reduce the computation time needed for large
1587# code bases. Also note that the size of a graph can be further restricted by
1588# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
1589
1590MAX_DOT_GRAPH_DEPTH    = 0
1591
1592# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
1593# background. This is disabled by default, because dot on Windows does not
1594# seem to support this out of the box. Warning: Depending on the platform used,
1595# enabling this option may lead to badly anti-aliased labels on the edges of
1596# a graph (i.e. they become hard to read).
1597
1598DOT_TRANSPARENT        = NO
1599
1600# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
1601# files in one run (i.e. multiple -o and -T options on the command line). This
1602# makes dot run faster, but since only newer versions of dot (>1.8.10)
1603# support this, this feature is disabled by default.
1604
1605DOT_MULTI_TARGETS      = NO
1606
1607# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1608# generate a legend page explaining the meaning of the various boxes and
1609# arrows in the dot generated graphs.
1610
1611GENERATE_LEGEND        = YES
1612
1613# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1614# remove the intermediate dot files that are used to generate
1615# the various graphs.
1616
1617DOT_CLEANUP            = YES
Note: See TracBrowser for help on using the repository browser.