Context Navigation

CMakeLists.txt @ 421

Last change on this file since 421 was 303, checked in by Torben Dannhauer, 13 years ago

File size: 17.5 KB

Line
1	#################################################################################################
2	# This file allows to configure osgVisual with CMAKE to generate native build solutions. #
3	# #
4	# Specify the following environment variables to use osgVisual and this CMAKE script: #
5	# * OSG_ROOT: Path to your 32 bit (x86) OSG, e.g. D:\OSG\OpenSceneGraph-2.9.8_x86 #
6	# * OSG_ROOT_X64: Path to your 64 bit (x64) OSG, e.g. D:\OSG\OpenSceneGraph-2.9.8_x64 #
7	# * OSG: Path to your 32 bit (x86) OSG and 3rdParty binary folder, #
8	# e.g. %OSG_ROOT%\bin;D:\OSG\3rdParty\bin\x86 #
9	# * OSG_X64: Path to your 64 bit (x64) OSG and 3rdParty binary folder, #
10	# e.g. %OSG_ROOT_X64%\bin;D:\OSG\3rdParty\bin\x64 #
11	# * PATH: Extend with %OSG% or %OSG_X64% to use OSG and osgVisual from command line, #
12	# e.g. PATH=%PATH%;%OSG% #
13	# #
14	# NOTE: On Visual Studio and x64 Arch, CMAKE uses the project settings to specify the #
15	# correct x64 OSG path, so you can use the 32bit OSG in your system path. #
16	# #
17	# #
18	#################################################################################################
19
20	cmake_minimum_required(VERSION 2.8)
21
22
23	PROJECT(osgVisual)
24	#SET(CMAKE_MODULE_PATH "${osgVisual_SOURCE_DIR}/../CMakeModules;${CMAKE_MODULE_PATH}")
25
26	# Check Architecture
27	IF( CMAKE_SIZEOF_VOID_P EQUAL 4 )
28	MESSAGE( STATUS "32 bit architecture detected" )
29	SET(DESTINATION_ARCH "x86")
30	ENDIF()
31	IF( CMAKE_SIZEOF_VOID_P EQUAL 8 )
32	MESSAGE( STATUS "64 bit architecture detected" )
33	SET(DESTINATION_ARCH "x64")
34	ENDIF()
35
36
37	# Get required packages
38	IF(DESTINATION_ARCH STREQUAL "x64")
39	SET(OSG_ROOT_BKP $ENV{OSG_ROOT}) # BACKUP old OSG_ROOT
40	SET(ENV{OSG_ROOT} $ENV{OSG_ROOT_X64}) # Replace OSGROOT with OSG_ROOT_X64 to force CMAKE to find the correct OSG version (64 bit)
41	ENDIF ()
42
43	SET(OpenSceneGraph_MARK_AS_ADVANCED ON)
44	FIND_PACKAGE(OpenSceneGraph 3.0.0 REQUIRED osgViewer OpenThreads osgDB osgTerrain osgGA osgText osgSim osgUtil)
45	FIND_PACKAGE(OpenGL REQUIRED)
46
47
48	IF(DESTINATION_ARCH STREQUAL "x64")
49	SET(ENV{OSG_ROOT} ${OSG_ROOT_BKP}) # Restore old OSG_ROOT
50	UNSET(OSG_ROOT_BKP) # Delete backup
51	ENDIF ()
52
53	# LIBXML2
54	SET(LIBXML2_LIBRARY ../../../OpenSceneGraph/3rdParty_x86_x64/${DESTINATION_ARCH}/lib/libxml2 CACHE FILEPATH "Select the libxml2 library to link osgVisual against. REQUIRED!" )
55	SET(LIBXML2_INCLUDE ../../../OpenSceneGraph/3rdParty_x86_x64/${DESTINATION_ARCH}/include CACHE PATH "Select the libxml2 include path to link osgVisual against. REQUIRED!" )
56	INCLUDE_DIRECTORIES( ${LIBXML2_INCLUDE} )
57
58	# Module sky-silverlining
59	# OPTION( OPTION_VAR "description string" [initial value] )
60	IF ( WIN32 )
61
62	SET(USE_SKY_SILVERLINING ON CACHE BOOL "Enable to use Sundog-soft's Silverlining SDK for sky & weather")
63	IF(USE_SKY_SILVERLINING )
64
65	SET(checkSL $ENV{SILVERLINING_PATH})
66	IF(NOT checkSL)
67	MESSAGE( "You have activated SilverLining [SL] in CMake, but the SL installation path could not be found! Please deactivate SL or setup it's pathes in CMake manually!" )
68	ENDIF()
69
70
71	SET(SOURCES
72	${SOURCES}
73	include/sky_Silverlining/skySilverLining_AtmosphereReference.h
74	include/sky_Silverlining/skySilverLining_cloudLayerSlot.h
75	include/sky_Silverlining/skySilverLining_cloudsDrawable.h
76	include/sky_Silverlining/skySilverLining_ProjectionMatrixCallback.h
77	include/sky_Silverlining/skySilverLining_skyDrawable.h
78	include/sky_Silverlining/visual_skySilverLining.h
79	src/sky_Silverlining/skySilverLining_cloudsDrawable.cpp
80	src/sky_Silverlining/skySilverLining_skyDrawable.cpp
81	src/sky_Silverlining/visual_skySilverLining.cpp
82	)
83
84	IF (DESTINATION_ARCH STREQUAL "x86")
85	SET(SILVERLINING_ARCH "win32")
86	ELSEIF ( DESTINATION_ARCH STREQUAL "x64" )
87	SET(SILVERLINING_ARCH "x64")
88	ENDIF ()
89	SET(SILVERLINING_LIBRARY_RELEASE $ENV{SILVERLINING_PATH}\\lib\\vc9\\${SILVERLINING_ARCH}\\SilverLining-MT-DLL.lib CACHE FILEPATH "Select the release library of Sundog-Soft's Silverlining SDK to link against." )
90	SET(SILVERLINING_LIBRARY_DEBUG $ENV{SILVERLINING_PATH}\\lib\\vc9\\${SILVERLINING_ARCH}\\SilverLining-MTD-DLL.lib CACHE FILEPATH "Select the debug library of Sundog-Soft's Silverlining SDK to link against." )
91	SET(SILVERLINING_INCLUDE_DIR "$ENV{SILVERLINING_PATH}\\Public Headers" CACHE PATH "Enter the path to the the public Include directory of Sundog-Soft's Silverlining SDK" )
92	SET(SILVERLINING_LICENSEE "Your user name" CACHE STRING "Enter your Silverlining licensee name. If you license available, osgVisual will work with silverlining as 5 minute demo with the default value." )
93	SET(SILVERLINING_LICENSE "Your license code" CACHE STRING "Enter your Silverlining license key. If you license available, osgVisual will work with silverlining as 5 minute demo with the default value." )
94	INCLUDE_DIRECTORIES(${SILVERLINING_INCLUDE_DIR} include/sky_Silverlining)
95	ADD_DEFINITIONS( "-DUSE_SKY_SILVERLINING" )
96	ADD_DEFINITIONS( "-DSILVERLINING_LICENSEE=\"${SILVERLINING_LICENSEE}\"" )
97	ADD_DEFINITIONS( "-DSILVERLINING_LICENSE=\"${SILVERLINING_LICENSE}\"" )
98
99	ELSE(USE_SKY_SILVERLINING)
100	UNSET(SILVERLINING_LIBRARY_RELEASE CACHE)
101	UNSET(SILVERLINING_LIBRARY_DEBUG CACHE)
102	UNSET(SILVERLINING_INCLUDE_DIR CACHE)
103	UNSET(SILVERLINING_LICENSEE)
104	UNSET(SILVERLINING_LICENSE)
105	ENDIF(USE_SKY_SILVERLINING)
106	ENDIF(WIN32)
107	IF(UNIX)
108	SET(USE_SKY_SILVERLINING ON CACHE BOOL "Enable to use Sundog-soft's Silverlining SDK for sky & weather")
109	IF(USE_SKY_SILVERLINING )
110	SET(SOURCES
111	${SOURCES}
112	include/sky_Silverlining/skySilverLining_AtmosphereReference.h
113	include/sky_Silverlining/skySilverLining_cloudLayerSlot.h
114	include/sky_Silverlining/skySilverLining_cloudsDrawable.h
115	include/sky_Silverlining/skySilverLining_ProjectionMatrixCallback.h
116	include/sky_Silverlining/skySilverLining_skyDrawable.h
117	include/sky_Silverlining/visual_skySilverLining.h
118	src/sky_Silverlining/skySilverLining_cloudsDrawable.cpp
119	src/sky_Silverlining/skySilverLining_skyDrawable.cpp
120	src/sky_Silverlining/visual_skySilverLining.cpp
121	)
122
123	IF (DESTINATION_ARCH STREQUAL "x86")
124	SET(SILVERLINING_ARCH "win32")
125	ELSEIF ( DESTINATION_ARCH STREQUAL "x64" )
126	SET(SILVERLINING_ARCH "x64")
127	ENDIF ()
128	SET(SILVERLINING_LIBRARY_RELEASE $ENV{SILVERLINING_PATH}\\lib\\vc9\\${SILVERLINING_ARCH}\\SilverLining-MT-DLL.lib CACHE FILEPATH "Select the release library of Sundog-Soft's Silverlining SDK to link against." )
129	SET(SILVERLINING_LIBRARY_DEBUG $ENV{SILVERLINING_PATH}\\lib\\vc9\\${SILVERLINING_ARCH}\\SilverLining-MTD-DLL.lib CACHE FILEPATH "Select the debug library of Sundog-Soft's Silverlining SDK to link against." )
130	SET(SILVERLINING_INCLUDE_DIR "$ENV{SILVERLINING_PATH}\\Public Headers" CACHE PATH "Enter the path to the the public Include directory of Sundog-Soft's Silverlining SDK" )
131	SET(SILVERLINING_LICENSEE "Your user name" CACHE STRING "Enter your Silverlining licensee name. If you license available, osgVisual will work with silverlining as 5 minute demo with the default value." )
132	SET(SILVERLINING_LICENSE "Your license code" CACHE STRING "Enter your Silverlining license key. If you license available, osgVisual will work with silverlining as 5 minute demo with the default value." )
133	INCLUDE_DIRECTORIES(${SILVERLINING_INCLUDE_DIR} "include/sky_Silverlining" )
134	ADD_DEFINITIONS( "-DUSE_SKY_SILVERLINING" )
135	ADD_DEFINITIONS( "-DSILVERLINING_LICENSEE=\"${SILVERLINING_LICENSEE}\"" )
136	ADD_DEFINITIONS( "-DSILVERLINING_LICENSE=\"${SILVERLINING_LICENSE}\"" )
137
138	ELSE(USE_SKY_SILVERLINING)
139	UNSET(SILVERLINING_LIBRARY_RELEASE CACHE)
140	UNSET(SILVERLINING_LIBRARY_DEBUG CACHE)
141	UNSET(SILVERLINING_INCLUDE_DIR CACHE)
142	UNSET(SILVERLINING_LICENSEE)
143	UNSET(SILVERLINING_LICENSE)
144	ENDIF(USE_SKY_SILVERLINING)
145	ENDIF()
146
147	# Module distortion
148	SET(USE_DISTORTION OFF CACHE BOOL "Enable to use distortion with Projection Designer's distortion maps")
149	IF(USE_DISTORTION)
150	SET(SOURCES
151	${SOURCES}
152	include/distortion/visual_distortion.h
153	src/distortion/visual_distortion.cpp
154	)
155	INCLUDE_DIRECTORIES(include/distortion)
156	ADD_DEFINITIONS( "-DUSE_DISTORTION" )
157	ENDIF(USE_DISTORTION)
158
159
160	# Module Vista2D - Only available under Win32
161	if( WIN32 )
162	SET(USE_VISTA2D OFF CACHE BOOL "Enable to use Vista2D by Wetzel Technology")
163	IF( USE_VISTA2D )
164	INCLUDE_DIRECTORIES( include/vista2D )
165	SET(SOURCES
166	${SOURCES}
167	include/vista2D/visual_vista2D.h
168	src/vista2D/visual_vista2D.cpp
169	)
170	SET(VISTA2D_INCLUDE_DIR . CACHE PATH "Select the INCLUDE directory path for Vista2D by Wetzel Technology." )
171	SET(VISTA2D_LIBRARY_DEBUG . CACHE FILEPATH "Select debug LIBRARY path for linking against Vista2D by Wetzel Technology." )
172	SET(VISTA2D_LIBRARY_RELEASE . CACHE FILEPATH "Select release LIBRARY path for linking against Vista2D by Wetzel Technology." )
173	INCLUDE_DIRECTORIES(${VISTA2D_INCLUDE_DIR})
174	ADD_DEFINITIONS( "-DUSE_VISTA2D" )
175	ELSE(USE_VISTA2D)
176	UNSET(VISTA2D_INCLUDE_DIR CACHE)
177	UNSET(VISTA2D_LIBRARY_DEBUG CACHE)
178	UNSET(VISTA2D_LIBRARY_RELEASE CACHE)
179	ENDIF(USE_VISTA2D)
180	ENDIF(WIN32)
181
182
183	# Module Spacenavigator manipulator - ONLY under WIN32
184	if( WIN32 )
185	# No header or linking required, because WIN32 COM interface used.
186	SET(USE_SPACEMOUSE ON CACHE BOOL "Enable to use camera manipulator based on Spacenavigator by 3DConnexion")
187	IF( USE_SPACEMOUSE )
188	SET(SOURCES
189	${SOURCES}
190	include/manip_Spacemouse/manip_spaceMouse.h
191	include/manip_Spacemouse/manip_freeSpaceMouse.h
192	include/manip_Spacemouse/manip_nodeTrackerSpaceMouse.h
193	src/manip_Spacemouse/manip_spaceMouse.cpp
194	src/manip_Spacemouse/manip_freeSpaceMouse.cpp
195	src/manip_Spacemouse/manip_nodeTrackerSpaceMouse.cpp
196	)
197	INCLUDE_DIRECTORIES(include/manip_Spacemouse)
198	ADD_DEFINITIONS( "-DUSE_SPACENAVIGATOR" )
199	ENDIF(USE_SPACEMOUSE)
200	ENDIF(WIN32)
201
202
203	# Module cluster
204	SET(SOURCES
205	${SOURCES}
206	include/cluster/dataIO_cluster.h
207	include/cluster/dataIO_clusterDummy.h
208	src/cluster/dataIO_clusterDummy.cpp
209	)
210	SET(USE_CLUSTER_ASIO_TCP_IOSTREAM OFF CACHE BOOL "Enable to use the Boost ASIO TCP iostream implementation for the cluster interface")
211	SET(USE_CLUSTER_ENET ON CACHE BOOL "Enable to use the ENet reliable UDP library implementation for the cluster interface")
212	IF( USE_CLUSTER_ASIO_TCP_IOSTREAM )
213	SET(SOURCES
214	${SOURCES}
215	include/cluster/dataIO_clusterAsioTcpIostream.h
216	src/cluster/dataIO_clusterAsioTcpIostream.cpp
217	)
218	ADD_DEFINITIONS( "-DUSE_CLUSTER_ASIO_TCP_IOSTREAM" )
219	ADD_DEFINITIONS( "-D_WIN32_WINNT=0x0501" )
220	SET(BOOST_LIBRARY_PATH "../../../3rdParty_x86_x64/lib/${DESTINATION_ARCH}/" CACHE PATH "Select the library folder of Boost libraries to link against." )
221	SET(BOOST_INCLUDE_DIR "../../../3rdParty_x86_x64/include/boost-1.43.0/" CACHE PATH "Enter the path to the the include directory of Boost" )
222	INCLUDE_DIRECTORIES(${BOOST_INCLUDE_DIR})
223	LINK_DIRECTORIES(${BOOST_LIBRARY_PATH})
224	ELSE()
225	UNSET(BOOST_LIBRARY_PATH CACHE)
226	UNSET(BOOST_ASIO_INCLUDE_DIR CACHE)
227	ENDIF()
228
229	IF( USE_CLUSTER_ENET )
230	SET(SOURCES
231	${SOURCES}
232	include/cluster/dataIO_clusterENet.h
233	src/cluster/dataIO_clusterENet.cpp
234	include/cluster/dataIO_clusterENet_implementation.h
235	src/cluster/dataIO_clusterENet_implementation.cpp
236	src/cluster/enet/callbacks.c
237	src/cluster/enet/compress.c
238	src/cluster/enet/host.c
239	src/cluster/enet/list.c
240	src/cluster/enet/packet.c
241	src/cluster/enet/peer.c
242	src/cluster/enet/protocol.c
243	src/cluster/enet/unix.c
244	src/cluster/enet/win32.c
245	include/cluster/enet/callbacks.h
246	include/cluster/enet/enet.h
247	include/cluster/enet/list.h
248	include/cluster/enet/protocol.h
249	include/cluster/enet/time.h
250	include/cluster/enet/types.h
251	include/cluster/enet/unix.h
252	include/cluster/enet/utility.h
253	include/cluster/enet/win32.h
254	)
255	ADD_DEFINITIONS( "-DUSE_CLUSTER_ENET" )
256	ENDIF()
257
258
259
260
261	# Module extLink
262	SET(SOURCES
263	${SOURCES}
264	include/extLink/dataIO_extLinkDummy.h
265	src/extLink/dataIO_extLinkDummy.cpp
266	include/extLink/dataIO_extLink.h
267	include/extLink/manip_extLink.h
268	src/extLink/manip_extLink.cpp
269	)
270	IF ( WIN32 )
271	SET(USE_EXTLINK_VCL ON CACHE BOOL "Enable to use the VCL Implementation for the externalLink interface")
272	IF( USE_EXTLINK_VCL )
273	SET(EXTLINK_VCL_INCLUDE_DIR ../../VCL_1.0.3.4/source/include/VCL CACHE PATH "Select the INCLUDE directory path for extLink VCL Implementation." )
274	SET(SOURCES
275	${SOURCES}
276	include/extLink/dataIO_extLinkVCL.h
277	src/extLink/dataIO_extLinkVCL.cpp
278	)
279	INCLUDE_DIRECTORIES(${EXTLINK_VCL_INCLUDE_DIR})
280	ADD_DEFINITIONS( "-DUSE_EXTLINK_VCL" )
281	#Linking: VCL uses #pragma to link, no need for linking configuration in CMAKE
282	ELSE(USE_EXTLINK_VCL)
283	UNSET(EXTLINK_VCL_INCLUDE_DIR CACHE)
284	ENDIF(USE_EXTLINK_VCL)
285	ELSE(WIN32)
286	UNSET(EXTLINK_VCL_INCLUDE_DIR CACHE)
287
288
289	ENDIF(WIN32)
290
291
292
293	# Set core sources
294	SET(SOURCES
295	${SOURCES}
296	# Core
297	include/core/visual_core.h
298	src/core/visual_core.cpp
299	src/core/osgVisual.cpp
300	include/core/core_manipulator.h
301	src/core/core_manipulator.cpp
302	# Memory Leak debugging
303	include/core/leakDetection.h
304	# Util
305	include/util/visual_util.h
306	src/util/visual_util.cpp
307	include/util/terrainQuery.h
308	src/util/terrainQuery.cpp
309	# Draw 2D
310	include/draw2D/visual_draw2D.h
311	src/draw2D/visual_draw2D.cpp
312	# Debug HUD
313	include/draw2D/visual_debug_hud.h
314	src/draw2D/visual_debug_hud.cpp
315	# Example HUD
316	include/draw2D/visual_hud.h
317	src/draw2D/visual_hud.cpp
318	# Draw 3D
319	include/draw3D/visual_draw3D.h
320	src/draw3D/visual_draw3D.cpp
321	# Object Mounted Manipulator
322	include/manip_ObjectMounted/manip_objectMounted.h
323	src/manip_ObjectMounted/manip_objectMounted.cpp
324	# Objects
325	include/object/visual_object.h
326	include/object/object_updater.h
327	src/object/visual_object.cpp
328	src/object/object_updater.cpp
329	# DataIO
330	include/dataIO/visual_dataIO.h
331	include/dataIO/dataIO_transportContainer.h
332	include/dataIO/dataIO_slot.h
333	include/dataIO/dataIO_executer.h
334	src/dataIO/visual_dataIO.cpp
335	src/dataIO/dataIO_transportContainer.cpp
336	src/dataIO/dataIO_slot.cpp
337	src/dataIO/dataIO_executer.cpp
338	)
339
340	INCLUDE_DIRECTORIES(include/core include/util include/draw2D include/draw3D include/object include/manip_ObjectMounted)
341	INCLUDE_DIRECTORIES(include/dataIO include/cluster include/extLink ${OPENSCENEGRAPH_INCLUDE_DIRS} .)
342
343
344	# Executable Output
345	SET(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${CMAKE_SOURCE_DIR}/bin)
346	ADD_EXECUTABLE(osgVisual ${SOURCES})
347
348
349	# Linking
350	TARGET_LINK_LIBRARIES(osgVisual ${OPENSCENEGRAPH_LIBRARIES} ${OPENGL_LIBRARIES} ${LIBXML2_LIBRARY})
351
352
353	IF(USE_SKY_SILVERLINING )
354	IF(WIN32)
355	TARGET_LINK_LIBRARIES(osgVisual "winmm.lib")
356	ENDIF(WIN32)
357	TARGET_LINK_LIBRARIES(osgVisual debug ${SILVERLINING_LIBRARY_DEBUG} optimized ${SILVERLINING_LIBRARY_RELEASE})
358	ENDIF(USE_SKY_SILVERLINING)
359
360	IF(USE_VISTA2D)
361	TARGET_LINK_LIBRARIES(osgVisual debug ${VISTA2D_LIBRARY_DEBUG} optimized ${VISTA2D_LIBRARY_RELEASE})
362	ENDIF(USE_VISTA2D)
363
364	IF(USE_CLUSTER_ENET AND WIN32)
365	TARGET_LINK_LIBRARIES(osgVisual "winmm.lib" "ws2_32.lib" )
366	ENDIF(USE_CLUSTER_ENET AND WIN32)
367
368	# CMAKE Fix for VS to not prepend build type to path.
369	IF(MSVC)
370	SET_TARGET_PROPERTIES(osgVisual PROPERTIES PREFIX "../")
371	ENDIF(MSVC)
372	SET_TARGET_PROPERTIES( osgVisual PROPERTIES DEBUG_POSTFIX d )
373
374	# Adding definitions to disable multicore compiling
375	IF(MSVC)
376	SET(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /MP1")
377	ENDIF(MSVC)
378
379	# Generating vcproj file, if MSVC to preset debugging parameter - based on http://stackoverflow.com/questions/1005901/how-to-set-path-environment-variable-using-cmake-and-visual-studio-to-run-test
380	IF (MSVC)
381	# Set up a default .user file that contains the debugging setup
382	## Find user and system name
383	SET(SYSTEM_NAME $ENV{USERDOMAIN} CACHE STRING "Build System Name")
384	SET(USER_NAME $ENV{USERNAME} CACHE STRING "Build System UserName")
385	SET(USERFILE_COMMAND_DEBUG "$(TargetPath)" CACHE STRING "Command to execute on debugging (VS Project settings)" )
386	SET(USERFILE_WORKING_DIRECTORY_DEBUG "bin" CACHE STRING "Working directory on debugging (VS Project settings)" )
387	SET(USERFILE_COMMAND_ARGUMENTS_DEBUG " --window 100 100 800 600 --config osgVisualConfig.xml" CACHE STRING "Command arguments (VS Project settings)" )
388	SET(USERFILE_REMOTE_MACHINE_DEBUG ${USER_NAME} CACHE STRING "Remote Debugging Machine (VS Project settings)")
389	IF (DESTINATION_ARCH STREQUAL "x64")
390	SET(USERFILE_ENVIRONMENT "PATH=%OSG_X64%;%PATH%" CACHE STRING "Environment Variables that VS should merge on thy fly with system environment to run osgVisual (VS Project settings)")
391	ENDIF ()
392
393
394	# Only do this if one doesn't already exist
395	SET (USER_FILE ${PROJECT_NAME}.vcproj.${SYSTEM_NAME}.${USER_NAME}.user)
396	IF (NOT EXISTS "${USER_FILE}")
397	message (STATUS "Creating ${USER_FILE} with default debug settings")
398	# These are the configuration variables
399	IF (CMAKE_GENERATOR MATCHES "Win64")
400	SET (USERFILE_PLATFORM "x64")
401	ELSE ()
402	SET (USERFILE_PLATFORM "Win32")
403	ENDIF ()
404
405	# Configure the template file
406	# MSC_VER 1300: MSC 13.0, VC 7.0, VS 2002
407	# MSC_VER 1310: MSC 13.1, VC 7.1, VS 2003
408	# MSC_VER 1400: MSC 14.0, VC 8.0, VS 2005
409	# MSC_VER 1500: MSC 15.0, VC 9.0, VS 2008
410	# MSC_VER 1600: MSC ??.0, VC 10.0, VS 2010
411	IF (MSVC_VERSION EQUAL 1400)
412	CONFIGURE_FILE(VC80.vcproj.user.template ${USER_FILE} @ONLY)
413	ENDIF()
414	IF (MSVC_VERSION EQUAL 1500)
415	CONFIGURE_FILE(VC90.vcproj.user.template ${USER_FILE} @ONLY)
416	ENDIF()
417	ELSE()
418	message (STATUS "Userfile ${USER_FILE} already exist: Skipping")
419	ENDIF()
420	ENDIF()
421
422

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: osgVisual/trunk/CMakeLists.txt @ 421

Download in other formats: