Context Navigation

source: osgVisual/trunk/CMakeLists.txt @ 229

Last change on this file since 229 was 199, checked in by Torben Dannhauer, 14 years ago

File size: 17.1 KB

Line
1	#################################################################################################
2	# This file allows to configure osgVisual with CMAKE to generate native build solutions. #
3	# #
4	# Specify the following environment variables to use osgVisual and this CMAKE script: #
5	# * OSG_ROOT: Path to your 32 bit (x86) OSG, e.g. D:\OSG\OpenSceneGraph-2.9.8_x86 #
6	# * OSG_ROOT_X64: Path to your 64 bit (x64) OSG, e.g. D:\OSG\OpenSceneGraph-2.9.8_x64 #
7	# * OSG: Path to your 32 bit (x86) OSG and 3rdParty binary folder, #
8	# e.g. %OSG_ROOT%\bin;D:\OSG\3rdParty\bin\x86 #
9	# * OSG_X64: Path to your 64 bit (x64) OSG and 3rdParty binary folder, #
10	# e.g. %OSG_ROOT_X64%\bin;D:\OSG\3rdParty\bin\x64 #
11	# * PATH: Extend with %OSG% or %OSG_X64% to use OSG and osgVisual from command line, #
12	# e.g. PATH=%PATH%;%OSG% #
13	# #
14	# NOTE: On Visual Studio and x64 Arch, CMAKE uses the project settings to specify the #
15	# correct x64 OSG path, so you can use osg as 32 bit in your system path. #
16	# #
17	# #
18	#################################################################################################
19
20	cmake_minimum_required(VERSION 2.8)
21
22
23	PROJECT(osgVisual)
24	#SET(CMAKE_MODULE_PATH "${osgVisual_SOURCE_DIR}/../CMakeModules;${CMAKE_MODULE_PATH}")
25
26	# Check Architecture
27	IF( CMAKE_SIZEOF_VOID_P EQUAL 4 )
28	MESSAGE( STATUS "32 bit architecture detected" )
29	SET(DESTINATION_ARCH "x86")
30	ENDIF()
31	IF( CMAKE_SIZEOF_VOID_P EQUAL 8 )
32	MESSAGE( STATUS "64 bit architecture detected" )
33	SET(DESTINATION_ARCH "x64")
34	ENDIF()
35
36
37	# Get required packages
38	IF(DESTINATION_ARCH STREQUAL "x64")
39	SET(OSG_ROOT_BKP $ENV{OSG_ROOT}) # BACKUP old OSG_ROOT
40	SET(ENV{OSG_ROOT} $ENV{OSG_ROOT_X64}) # Replace OSGROOT with OSG_ROOT_X64 to force CMAKE to find the correct OSG version (64 bit)
41	ENDIF ()
42
43	SET(OpenSceneGraph_MARK_AS_ADVANCED ON)
44	FIND_PACKAGE(OpenSceneGraph 2.9.9 REQUIRED osgViewer OpenThreads osgDB osgTerrain osgGA osgText osgSim osgUtil)
45	FIND_PACKAGE(OpenGL REQUIRED)
46
47
48	IF(DESTINATION_ARCH STREQUAL "x64")
49	SET(ENV{OSG_ROOT} ${OSG_ROOT_BKP}) # Restore old OSG_ROOT
50	UNSET(OSG_ROOT_BKP) # Delete backup
51	ENDIF ()
52
53	# LIBXML2
54	SET(LIBXML2_LIBRARY ../../../OpenSceneGraph/3rdParty_x86_x64/${DESTINATION_ARCH}/lib/libxml2 CACHE FILEPATH "Select the libxml2 library to link osgVisual against. REQUIRED!" )
55	SET(LIBXML2_INCLUDE ../../../OpenSceneGraph/3rdParty_x86_x64/${DESTINATION_ARCH}/include CACHE PATH "Select the libxml2 include path to link osgVisual against. REQUIRED!" )
56	INCLUDE_DIRECTORIES( ${LIBXML2_INCLUDE} )
57
58	# Module sky-silverlining
59	# OPTION( OPTION_VAR "description string" [initial value] )
60	IF ( WIN32 )
61
62	SET(USE_SKY_SILVERLINING ON CACHE BOOL "Enable to use Sundog-soft's Silverlining SDK for sky & weather")
63	IF(USE_SKY_SILVERLINING )
64	SET(SOURCES
65	${SOURCES}
66	include/sky_Silverlining/skySilverLining_AtmosphereReference.h
67	include/sky_Silverlining/skySilverLining_cloudLayerSlot.h
68	include/sky_Silverlining/skySilverLining_cloudsDrawable.h
69	include/sky_Silverlining/skySilverLining_ProjectionMatrixCallback.h
70	include/sky_Silverlining/skySilverLining_skyDrawable.h
71	include/sky_Silverlining/visual_skySilverLining.h
72	src/sky_Silverlining/skySilverLining_cloudsDrawable.cpp
73	src/sky_Silverlining/skySilverLining_skyDrawable.cpp
74	src/sky_Silverlining/visual_skySilverLining.cpp
75	)
76
77	IF (DESTINATION_ARCH STREQUAL "x86")
78	SET(SILVERLINING_ARCH "win32")
79	ELSEIF ( DESTINATION_ARCH STREQUAL "x64" )
80	SET(SILVERLINING_ARCH "x64")
81	ENDIF ()
82	SET(SILVERLINING_LIBRARY_RELEASE $ENV{SILVERLINING_PATH}\\lib\\vc9\\${SILVERLINING_ARCH}\\SilverLining-MT-DLL.lib CACHE FILEPATH "Select the release library of Sundog-Soft's Silverlining SDK to link against." )
83	SET(SILVERLINING_LIBRARY_DEBUG $ENV{SILVERLINING_PATH}\\lib\\vc9\\${SILVERLINING_ARCH}\\SilverLining-MTD-DLL.lib CACHE FILEPATH "Select the debug library of Sundog-Soft's Silverlining SDK to link against." )
84	SET(SILVERLINING_INCLUDE_DIR "$ENV{SILVERLINING_PATH}\\Public Headers" CACHE PATH "Enter the path to the the public Include directory of Sundog-Soft's Silverlining SDK" )
85	SET(SILVERLINING_LICENSEE "Your user name" CACHE STRING "Enter your Silverlining licensee name. If you license available, osgVisual will work with silverlining as 5 minute demo with the default value." )
86	SET(SILVERLINING_LICENSE "Your license code" CACHE STRING "Enter your Silverlining license key. If you license available, osgVisual will work with silverlining as 5 minute demo with the default value." )
87	INCLUDE_DIRECTORIES(${SILVERLINING_INCLUDE_DIR} include/sky_Silverlining)
88	ADD_DEFINITIONS( "-DUSE_SKY_SILVERLINING" )
89	ADD_DEFINITIONS( "-DSILVERLINING_LICENSEE=\"${SILVERLINING_LICENSEE}\"" )
90	ADD_DEFINITIONS( "-DSILVERLINING_LICENSE=\"${SILVERLINING_LICENSE}\"" )
91
92	ELSE(USE_SKY_SILVERLINING)
93	UNSET(SILVERLINING_LIBRARY_RELEASE CACHE)
94	UNSET(SILVERLINING_LIBRARY_DEBUG CACHE)
95	UNSET(SILVERLINING_INCLUDE_DIR CACHE)
96	UNSET(SILVERLINING_LICENSEE)
97	UNSET(SILVERLINING_LICENSE)
98	ENDIF(USE_SKY_SILVERLINING)
99	ENDIF(WIN32)
100	IF(UNIX)
101	SET(USE_SKY_SILVERLINING ON CACHE BOOL "Enable to use Sundog-soft's Silverlining SDK for sky & weather")
102	IF(USE_SKY_SILVERLINING )
103	SET(SOURCES
104	${SOURCES}
105	include/sky_Silverlining/skySilverLining_AtmosphereReference.h
106	include/sky_Silverlining/skySilverLining_cloudLayerSlot.h
107	include/sky_Silverlining/skySilverLining_cloudsDrawable.h
108	include/sky_Silverlining/skySilverLining_ProjectionMatrixCallback.h
109	include/sky_Silverlining/skySilverLining_skyDrawable.h
110	include/sky_Silverlining/visual_skySilverLining.h
111	src/sky_Silverlining/skySilverLining_cloudsDrawable.cpp
112	src/sky_Silverlining/skySilverLining_skyDrawable.cpp
113	src/sky_Silverlining/visual_skySilverLining.cpp
114	)
115
116	IF (DESTINATION_ARCH STREQUAL "x86")
117	SET(SILVERLINING_ARCH "win32")
118	ELSEIF ( DESTINATION_ARCH STREQUAL "x64" )
119	SET(SILVERLINING_ARCH "x64")
120	ENDIF ()
121	SET(SILVERLINING_LIBRARY_RELEASE $ENV{SILVERLINING_PATH}\\lib\\vc9\\${SILVERLINING_ARCH}\\SilverLining-MT-DLL.lib CACHE FILEPATH "Select the release library of Sundog-Soft's Silverlining SDK to link against." )
122	SET(SILVERLINING_LIBRARY_DEBUG $ENV{SILVERLINING_PATH}\\lib\\vc9\\${SILVERLINING_ARCH}\\SilverLining-MTD-DLL.lib CACHE FILEPATH "Select the debug library of Sundog-Soft's Silverlining SDK to link against." )
123	SET(SILVERLINING_INCLUDE_DIR "$ENV{SILVERLINING_PATH}\\Public Headers" CACHE PATH "Enter the path to the the public Include directory of Sundog-Soft's Silverlining SDK" )
124	SET(SILVERLINING_LICENSEE "Your user name" CACHE STRING "Enter your Silverlining licensee name. If you license available, osgVisual will work with silverlining as 5 minute demo with the default value." )
125	SET(SILVERLINING_LICENSE "Your license code" CACHE STRING "Enter your Silverlining license key. If you license available, osgVisual will work with silverlining as 5 minute demo with the default value." )
126	INCLUDE_DIRECTORIES(${SILVERLINING_INCLUDE_DIR} "include/sky_Silverlining" )
127	ADD_DEFINITIONS( "-DUSE_SKY_SILVERLINING" )
128	ADD_DEFINITIONS( "-DSILVERLINING_LICENSEE=\"${SILVERLINING_LICENSEE}\"" )
129	ADD_DEFINITIONS( "-DSILVERLINING_LICENSE=\"${SILVERLINING_LICENSE}\"" )
130
131	ELSE(USE_SKY_SILVERLINING)
132	UNSET(SILVERLINING_LIBRARY_RELEASE CACHE)
133	UNSET(SILVERLINING_LIBRARY_DEBUG CACHE)
134	UNSET(SILVERLINING_INCLUDE_DIR CACHE)
135	UNSET(SILVERLINING_LICENSEE)
136	UNSET(SILVERLINING_LICENSE)
137	ENDIF(USE_SKY_SILVERLINING)
138	ENDIF()
139
140	# Module distortion
141	SET(USE_DISTORTION OFF CACHE BOOL "Enable to use distortion with Projection Designer's distortion maps")
142	IF(USE_DISTORTION)
143	SET(SOURCES
144	${SOURCES}
145	include/distortion/visual_distortion.h
146	src/distortion/visual_distortion.cpp
147	)
148	INCLUDE_DIRECTORIES(include/distortion)
149	ADD_DEFINITIONS( "-DUSE_DISTORTION" )
150	ENDIF(USE_DISTORTION)
151
152
153	# Module Vista2D - Only available under Win32
154	if( WIN32 )
155	SET(USE_VISTA2D OFF CACHE BOOL "Enable to use Vista2D by Wetzel Technology")
156	IF( USE_VISTA2D )
157	INCLUDE_DIRECTORIES( include/vista2D )
158	SET(SOURCES
159	${SOURCES}
160	include/vista2D/visual_vista2D.h
161	src/vista2D/visual_vista2D.cpp
162	)
163	SET(VISTA2D_INCLUDE_DIR . CACHE PATH "Select the INCLUDE directory path for Vista2D by Wetzel Technology." )
164	SET(VISTA2D_LIBRARY_DEBUG . CACHE FILEPATH "Select debug LIBRARY path for linking against Vista2D by Wetzel Technology." )
165	SET(VISTA2D_LIBRARY_RELEASE . CACHE FILEPATH "Select release LIBRARY path for linking against Vista2D by Wetzel Technology." )
166	INCLUDE_DIRECTORIES(${VISTA2D_INCLUDE_DIR})
167	ADD_DEFINITIONS( "-DUSE_VISTA2D" )
168	ELSE(USE_VISTA2D)
169	UNSET(VISTA2D_INCLUDE_DIR CACHE)
170	UNSET(VISTA2D_LIBRARY_DEBUG CACHE)
171	UNSET(VISTA2D_LIBRARY_RELEASE CACHE)
172	ENDIF(USE_VISTA2D)
173	ENDIF(WIN32)
174
175
176	# Module Spacenavigator manipulator - ONLY under WIN32
177	if( WIN32 )
178	# No header or linking required, because WIN32 COM interface used.
179	SET(USE_SPACEMOUSE ON CACHE BOOL "Enable to use camera manipulator based on Spacenavigator by 3DConnexion")
180	IF( USE_SPACEMOUSE )
181	SET(SOURCES
182	${SOURCES}
183	include/manip_Spacemouse/manip_spaceMouse.h
184	include/manip_Spacemouse/manip_freeSpaceMouse.h
185	include/manip_Spacemouse/manip_nodeTrackerSpaceMouse.h
186	src/manip_Spacemouse/manip_spaceMouse.cpp
187	src/manip_Spacemouse/manip_freeSpaceMouse.cpp
188	src/manip_Spacemouse/manip_nodeTrackerSpaceMouse.cpp
189	)
190	INCLUDE_DIRECTORIES(include/manip_Spacemouse)
191	ADD_DEFINITIONS( "-DUSE_SPACENAVIGATOR" )
192	ENDIF(USE_SPACEMOUSE)
193	ENDIF(WIN32)
194
195
196	# Module cluster
197	SET(SOURCES
198	${SOURCES}
199	include/cluster/dataIO_cluster.h
200	include/cluster/dataIO_clusterDummy.h
201	src/cluster/dataIO_clusterDummy.cpp
202	)
203	SET(USE_CLUSTER_ASIO_TCP_IOSTREAM OFF CACHE BOOL "Enable to use the Boost ASIO TCP iostream implementation for the cluster interface")
204	SET(USE_CLUSTER_ENET ON CACHE BOOL "Enable to use the ENet reliable UDP library implementation for the cluster interface")
205	IF( USE_CLUSTER_ASIO_TCP_IOSTREAM )
206	SET(SOURCES
207	${SOURCES}
208	include/cluster/dataIO_clusterAsioTcpIostream.h
209	src/cluster/dataIO_clusterAsioTcpIostream.cpp
210	)
211	ADD_DEFINITIONS( "-DUSE_CLUSTER_ASIO_TCP_IOSTREAM" )
212	ADD_DEFINITIONS( "-D_WIN32_WINNT=0x0501" )
213	SET(BOOST_LIBRARY_PATH "../../../3rdParty_x86_x64/lib/${DESTINATION_ARCH}/" CACHE PATH "Select the library folder of Boost libraries to link against." )
214	SET(BOOST_INCLUDE_DIR "../../../3rdParty_x86_x64/include/boost-1.43.0/" CACHE PATH "Enter the path to the the include directory of Boost" )
215	INCLUDE_DIRECTORIES(${BOOST_INCLUDE_DIR})
216	LINK_DIRECTORIES(${BOOST_LIBRARY_PATH})
217	ELSE()
218	UNSET(BOOST_LIBRARY_PATH CACHE)
219	UNSET(BOOST_ASIO_INCLUDE_DIR CACHE)
220	ENDIF()
221
222	IF( USE_CLUSTER_ENET )
223	SET(SOURCES
224	${SOURCES}
225	include/cluster/dataIO_clusterENet.h
226	src/cluster/dataIO_clusterENet.cpp
227	include/cluster/dataIO_clusterENet_implementation.h
228	src/cluster/dataIO_clusterENet_implementation.cpp
229	src/cluster/enet/callbacks.c
230	src/cluster/enet/compress.c
231	src/cluster/enet/host.c
232	src/cluster/enet/list.c
233	src/cluster/enet/packet.c
234	src/cluster/enet/peer.c
235	src/cluster/enet/protocol.c
236	src/cluster/enet/unix.c
237	src/cluster/enet/win32.c
238	include/cluster/enet/callbacks.h
239	include/cluster/enet/enet.h
240	include/cluster/enet/list.h
241	include/cluster/enet/protocol.h
242	include/cluster/enet/time.h
243	include/cluster/enet/types.h
244	include/cluster/enet/unix.h
245	include/cluster/enet/utility.h
246	include/cluster/enet/win32.h
247	)
248	ADD_DEFINITIONS( "-DUSE_CLUSTER_ENET" )
249	ENDIF()
250
251
252
253
254	# Module extLink
255	SET(SOURCES
256	${SOURCES}
257	include/extLink/dataIO_extLinkDummy.h
258	src/extLink/dataIO_extLinkDummy.cpp
259	include/extLink/dataIO_extLink.h
260	include/extLink/manip_extLink.h
261	src/extLink/manip_extLink.cpp
262	)
263	IF ( WIN32 )
264	SET(USE_EXTLINK_VCL ON CACHE BOOL "Enable to use the VCL Implementation for the externalLink interface")
265	IF( USE_EXTLINK_VCL )
266	SET(EXTLINK_VCL_INCLUDE_DIR ../../VCL_1.0.3.4/source/include/VCL CACHE PATH "Select the INCLUDE directory path for extLink VCL Implementation." )
267	SET(SOURCES
268	${SOURCES}
269	include/extLink/dataIO_extLinkVCL.h
270	src/extLink/dataIO_extLinkVCL.cpp
271	)
272	INCLUDE_DIRECTORIES(${EXTLINK_VCL_INCLUDE_DIR})
273	ADD_DEFINITIONS( "-DUSE_EXTLINK_VCL" )
274	#Linking: VCL uses #pragma to link, no need for linking configuration in CMAKE
275	ELSE(USE_EXTLINK_VCL)
276	UNSET(EXTLINK_VCL_INCLUDE_DIR CACHE)
277	ENDIF(USE_EXTLINK_VCL)
278	ELSE(WIN32)
279	UNSET(EXTLINK_VCL_INCLUDE_DIR CACHE)
280
281
282	ENDIF(WIN32)
283
284
285
286	# Set core sources
287	SET(SOURCES
288	${SOURCES}
289	# Core
290	include/core/visual_core.h
291	src/core/visual_core.cpp
292	src/core/osgVisual.cpp
293	# Memory Leak debugging
294	include/core/leakDetection.h
295	# Util
296	include/util/visual_util.h
297	src/util/visual_util.cpp
298	# Draw 2D
299	include/draw2D/visual_draw2D.h
300	src/draw2D/visual_draw2D.cpp
301	# Debug HUD
302	include/draw2D/visual_debug_hud.h
303	src/draw2D/visual_debug_hud.cpp
304	# Example HUD
305	include/draw2D/visual_hud.h
306	src/draw2D/visual_hud.cpp
307	# Draw 3D
308	include/draw3D/visual_draw3D.h
309	src/draw3D/visual_draw3D.cpp
310	# Object Mounted Manipulator
311	include/manip_ObjectMounted/manip_objectMounted.h
312	src/manip_ObjectMounted/manip_objectMounted.cpp
313	# Objects
314	include/object/visual_object.h
315	include/object/object_updater.h
316	src/object/visual_object.cpp
317	src/object/object_updater.cpp
318	# DataIO
319	include/dataIO/visual_dataIO.h
320	include/dataIO/dataIO_transportContainer.h
321	include/dataIO/dataIO_slot.h
322	include/dataIO/dataIO_executer.h
323	src/dataIO/visual_dataIO.cpp
324	src/dataIO/dataIO_transportContainer.cpp
325	src/dataIO/dataIO_slot.cpp
326	src/dataIO/dataIO_executer.cpp
327	)
328
329	INCLUDE_DIRECTORIES(include/core include/util include/draw2D include/draw3D include/object include/manip_ObjectMounted)
330	INCLUDE_DIRECTORIES(include/dataIO include/cluster include/extLink ${OPENSCENEGRAPH_INCLUDE_DIRS} .)
331
332
333	# Executable Output
334	SET(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${CMAKE_SOURCE_DIR}/bin)
335	ADD_EXECUTABLE(osgVisual ${SOURCES})
336
337
338	# Linking
339	TARGET_LINK_LIBRARIES(osgVisual ${OPENSCENEGRAPH_LIBRARIES} ${OPENGL_LIBRARIES} ${LIBXML2_LIBRARY})
340
341
342	IF(USE_SKY_SILVERLINING )
343	IF(WIN32)
344	TARGET_LINK_LIBRARIES(osgVisual "winmm.lib")
345	ENDIF(WIN32)
346	TARGET_LINK_LIBRARIES(osgVisual debug ${SILVERLINING_LIBRARY_DEBUG} optimized ${SILVERLINING_LIBRARY_RELEASE})
347	ENDIF(USE_SKY_SILVERLINING)
348
349	IF(USE_VISTA2D)
350	TARGET_LINK_LIBRARIES(osgVisual debug ${VISTA2D_LIBRARY_DEBUG} optimized ${VISTA2D_LIBRARY_RELEASE})
351	ENDIF(USE_VISTA2D)
352
353	IF(USE_CLUSTER_ENET AND WIN32)
354	TARGET_LINK_LIBRARIES(osgVisual "winmm.lib" "ws2_32.lib" )
355	ENDIF(USE_CLUSTER_ENET AND WIN32)
356
357	# CMAKE Fix for VS to not prepend build type to path.
358	IF(MSVC)
359	SET_TARGET_PROPERTIES(osgVisual PROPERTIES PREFIX "../")
360	ENDIF(MSVC)
361	SET_TARGET_PROPERTIES( osgVisual PROPERTIES DEBUG_POSTFIX d )
362
363	# Adding definitions to disable multicore compiling
364	IF(MSVC)
365	SET(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /MP1")
366	ENDIF(MSVC)
367
368	# Generating vcproj file, if MSVC to preset debugging parameter - based on http://stackoverflow.com/questions/1005901/how-to-set-path-environment-variable-using-cmake-and-visual-studio-to-run-test
369	IF (MSVC)
370	# Set up a default .user file that contains the debugging setup
371	## Find user and system name
372	SET(SYSTEM_NAME $ENV{USERDOMAIN} CACHE STRING "Build System Name")
373	SET(USER_NAME $ENV{USERNAME} CACHE STRING "Build System UserName")
374	SET(USERFILE_COMMAND_DEBUG "$(TargetPath)" CACHE STRING "Command to execute on debugging (VS Project settings)" )
375	SET(USERFILE_WORKING_DIRECTORY_DEBUG "bin" CACHE STRING "Working directory on debugging (VS Project settings)" )
376	SET(USERFILE_COMMAND_ARGUMENTS_DEBUG " --window 100 100 800 600 --config osgVisualConfig.xml" CACHE STRING "Command arguments (VS Project settings)" )
377	SET(USERFILE_REMOTE_MACHINE_DEBUG ${USER_NAME} CACHE STRING "Remote Debugging Machine (VS Project settings)")
378	IF (DESTINATION_ARCH STREQUAL "x64")
379	SET(USERFILE_ENVIRONMENT "PATH=%OSG_X64%;%PATH%" CACHE STRING "Environment Variables that VS should merge on thy fly with system environment to run osgVisual (VS Project settings)")
380	ENDIF ()
381
382
383	# Only do this if one doesn't already exist
384	SET (USER_FILE ${PROJECT_NAME}.vcproj.${SYSTEM_NAME}.${USER_NAME}.user)
385	IF (NOT EXISTS "${USER_FILE}")
386	message (STATUS "Creating ${USER_FILE} with default debug settings")
387	# These are the configuration variables
388	IF (CMAKE_GENERATOR MATCHES "Win64")
389	SET (USERFILE_PLATFORM "x64")
390	ELSE ()
391	SET (USERFILE_PLATFORM "Win32")
392	ENDIF ()
393
394	# Configure the template file
395	# MSC_VER 1300: MSC 13.0, VC 7.0, VS 2002
396	# MSC_VER 1310: MSC 13.1, VC 7.1, VS 2003
397	# MSC_VER 1400: MSC 14.0, VC 8.0, VS 2005
398	# MSC_VER 1500: MSC 15.0, VC 9.0, VS 2008
399	# MSC_VER 1600: MSC ??.0, VC 10.0, VS 2010
400	IF (MSVC_VERSION EQUAL 1400)
401	CONFIGURE_FILE(VC80.vcproj.user.template ${USER_FILE} @ONLY)
402	ENDIF()
403	IF (MSVC_VERSION EQUAL 1500)
404	CONFIGURE_FILE(VC90.vcproj.user.template ${USER_FILE} @ONLY)
405	ENDIF()
406	ELSE()
407	message (STATUS "Userfile ${USER_FILE} already exist: Skipping")
408	ENDIF()
409	ENDIF()
410
411

Note: See TracBrowser for help on using the repository browser.

Download in other formats: