Context Navigation

CMakeLists.txt @ 424

Last change on this file since 424 was 303, checked in by Torben Dannhauer, 13 years ago

File size: 17.5 KB

Rev	Line
[52]	1	#################################################################################################
	2	# This file allows to configure osgVisual with CMAKE to generate native build solutions. #
	3	# #
	4	# Specify the following environment variables to use osgVisual and this CMAKE script: #
	5	# * OSG_ROOT: Path to your 32 bit (x86) OSG, e.g. D:\OSG\OpenSceneGraph-2.9.8_x86 #
	6	# * OSG_ROOT_X64: Path to your 64 bit (x64) OSG, e.g. D:\OSG\OpenSceneGraph-2.9.8_x64 #
	7	# * OSG: Path to your 32 bit (x86) OSG and 3rdParty binary folder, #
	8	# e.g. %OSG_ROOT%\bin;D:\OSG\3rdParty\bin\x86 #
	9	# * OSG_X64: Path to your 64 bit (x64) OSG and 3rdParty binary folder, #
	10	# e.g. %OSG_ROOT_X64%\bin;D:\OSG\3rdParty\bin\x64 #
	11	# * PATH: Extend with %OSG% or %OSG_X64% to use OSG and osgVisual from command line, #
	12	# e.g. PATH=%PATH%;%OSG% #
	13	# #
	14	# NOTE: On Visual Studio and x64 Arch, CMAKE uses the project settings to specify the #
[241]	15	# correct x64 OSG path, so you can use the 32bit OSG in your system path. #
[52]	16	# #
	17	# #
	18	#################################################################################################
	19
[303]	20	cmake_minimum_required(VERSION 2.8)
[28]	21
[52]	22
[28]	23	PROJECT(osgVisual)
	24	#SET(CMAKE_MODULE_PATH "${osgVisual_SOURCE_DIR}/../CMakeModules;${CMAKE_MODULE_PATH}")
	25
[103]	26	# Check Architecture
[51]	27	IF( CMAKE_SIZEOF_VOID_P EQUAL 4 )
	28	MESSAGE( STATUS "32 bit architecture detected" )
	29	SET(DESTINATION_ARCH "x86")
	30	ENDIF()
	31	IF( CMAKE_SIZEOF_VOID_P EQUAL 8 )
	32	MESSAGE( STATUS "64 bit architecture detected" )
	33	SET(DESTINATION_ARCH "x64")
	34	ENDIF()
	35
[52]	36
[120]	37	# Get required packages
[52]	38	IF(DESTINATION_ARCH STREQUAL "x64")
	39	SET(OSG_ROOT_BKP $ENV{OSG_ROOT}) # BACKUP old OSG_ROOT
	40	SET(ENV{OSG_ROOT} $ENV{OSG_ROOT_X64}) # Replace OSGROOT with OSG_ROOT_X64 to force CMAKE to find the correct OSG version (64 bit)
	41	ENDIF ()
	42
	43	SET(OpenSceneGraph_MARK_AS_ADVANCED ON)
[303]	44	FIND_PACKAGE(OpenSceneGraph 3.0.0 REQUIRED osgViewer OpenThreads osgDB osgTerrain osgGA osgText osgSim osgUtil)
[28]	45	FIND_PACKAGE(OpenGL REQUIRED)
	46
[103]	47
[52]	48	IF(DESTINATION_ARCH STREQUAL "x64")
	49	SET(ENV{OSG_ROOT} ${OSG_ROOT_BKP}) # Restore old OSG_ROOT
	50	UNSET(OSG_ROOT_BKP) # Delete backup
	51	ENDIF ()
	52
[120]	53	# LIBXML2
[181]	54	SET(LIBXML2_LIBRARY ../../../OpenSceneGraph/3rdParty_x86_x64/${DESTINATION_ARCH}/lib/libxml2 CACHE FILEPATH "Select the libxml2 library to link osgVisual against. REQUIRED!" )
	55	SET(LIBXML2_INCLUDE ../../../OpenSceneGraph/3rdParty_x86_x64/${DESTINATION_ARCH}/include CACHE PATH "Select the libxml2 include path to link osgVisual against. REQUIRED!" )
[120]	56	INCLUDE_DIRECTORIES( ${LIBXML2_INCLUDE} )
[52]	57
[120]	58	# Module sky-silverlining
[28]	59	# OPTION( OPTION_VAR "description string" [initial value] )
	60	IF ( WIN32 )
	61
	62	SET(USE_SKY_SILVERLINING ON CACHE BOOL "Enable to use Sundog-soft's Silverlining SDK for sky & weather")
	63	IF(USE_SKY_SILVERLINING )
[241]	64
	65	SET(checkSL $ENV{SILVERLINING_PATH})
	66	IF(NOT checkSL)
[244]	67	MESSAGE( "You have activated SilverLining [SL] in CMake, but the SL installation path could not be found! Please deactivate SL or setup it's pathes in CMake manually!" )
[242]	68	ENDIF()
[241]	69
	70
[28]	71	SET(SOURCES
	72	${SOURCES}
	73	include/sky_Silverlining/skySilverLining_AtmosphereReference.h
[101]	74	include/sky_Silverlining/skySilverLining_cloudLayerSlot.h
[28]	75	include/sky_Silverlining/skySilverLining_cloudsDrawable.h
	76	include/sky_Silverlining/skySilverLining_ProjectionMatrixCallback.h
	77	include/sky_Silverlining/skySilverLining_skyDrawable.h
	78	include/sky_Silverlining/visual_skySilverLining.h
	79	src/sky_Silverlining/skySilverLining_cloudsDrawable.cpp
	80	src/sky_Silverlining/skySilverLining_skyDrawable.cpp
	81	src/sky_Silverlining/visual_skySilverLining.cpp
	82	)
	83
[51]	84	IF (DESTINATION_ARCH STREQUAL "x86")
	85	SET(SILVERLINING_ARCH "win32")
	86	ELSEIF ( DESTINATION_ARCH STREQUAL "x64" )
	87	SET(SILVERLINING_ARCH "x64")
	88	ENDIF ()
	89	SET(SILVERLINING_LIBRARY_RELEASE $ENV{SILVERLINING_PATH}\\lib\\vc9\\${SILVERLINING_ARCH}\\SilverLining-MT-DLL.lib CACHE FILEPATH "Select the release library of Sundog-Soft's Silverlining SDK to link against." )
	90	SET(SILVERLINING_LIBRARY_DEBUG $ENV{SILVERLINING_PATH}\\lib\\vc9\\${SILVERLINING_ARCH}\\SilverLining-MTD-DLL.lib CACHE FILEPATH "Select the debug library of Sundog-Soft's Silverlining SDK to link against." )
[28]	91	SET(SILVERLINING_INCLUDE_DIR "$ENV{SILVERLINING_PATH}\\Public Headers" CACHE PATH "Enter the path to the the public Include directory of Sundog-Soft's Silverlining SDK" )
	92	SET(SILVERLINING_LICENSEE "Your user name" CACHE STRING "Enter your Silverlining licensee name. If you license available, osgVisual will work with silverlining as 5 minute demo with the default value." )
	93	SET(SILVERLINING_LICENSE "Your license code" CACHE STRING "Enter your Silverlining license key. If you license available, osgVisual will work with silverlining as 5 minute demo with the default value." )
	94	INCLUDE_DIRECTORIES(${SILVERLINING_INCLUDE_DIR} include/sky_Silverlining)
	95	ADD_DEFINITIONS( "-DUSE_SKY_SILVERLINING" )
	96	ADD_DEFINITIONS( "-DSILVERLINING_LICENSEE=\"${SILVERLINING_LICENSEE}\"" )
	97	ADD_DEFINITIONS( "-DSILVERLINING_LICENSE=\"${SILVERLINING_LICENSE}\"" )
	98
	99	ELSE(USE_SKY_SILVERLINING)
	100	UNSET(SILVERLINING_LIBRARY_RELEASE CACHE)
	101	UNSET(SILVERLINING_LIBRARY_DEBUG CACHE)
	102	UNSET(SILVERLINING_INCLUDE_DIR CACHE)
	103	UNSET(SILVERLINING_LICENSEE)
	104	UNSET(SILVERLINING_LICENSE)
	105	ENDIF(USE_SKY_SILVERLINING)
	106	ENDIF(WIN32)
[100]	107	IF(UNIX)
[88]	108	SET(USE_SKY_SILVERLINING ON CACHE BOOL "Enable to use Sundog-soft's Silverlining SDK for sky & weather")
	109	IF(USE_SKY_SILVERLINING )
	110	SET(SOURCES
	111	${SOURCES}
	112	include/sky_Silverlining/skySilverLining_AtmosphereReference.h
[102]	113	include/sky_Silverlining/skySilverLining_cloudLayerSlot.h
[88]	114	include/sky_Silverlining/skySilverLining_cloudsDrawable.h
	115	include/sky_Silverlining/skySilverLining_ProjectionMatrixCallback.h
	116	include/sky_Silverlining/skySilverLining_skyDrawable.h
	117	include/sky_Silverlining/visual_skySilverLining.h
	118	src/sky_Silverlining/skySilverLining_cloudsDrawable.cpp
	119	src/sky_Silverlining/skySilverLining_skyDrawable.cpp
	120	src/sky_Silverlining/visual_skySilverLining.cpp
	121	)
	122
	123	IF (DESTINATION_ARCH STREQUAL "x86")
	124	SET(SILVERLINING_ARCH "win32")
	125	ELSEIF ( DESTINATION_ARCH STREQUAL "x64" )
	126	SET(SILVERLINING_ARCH "x64")
	127	ENDIF ()
	128	SET(SILVERLINING_LIBRARY_RELEASE $ENV{SILVERLINING_PATH}\\lib\\vc9\\${SILVERLINING_ARCH}\\SilverLining-MT-DLL.lib CACHE FILEPATH "Select the release library of Sundog-Soft's Silverlining SDK to link against." )
	129	SET(SILVERLINING_LIBRARY_DEBUG $ENV{SILVERLINING_PATH}\\lib\\vc9\\${SILVERLINING_ARCH}\\SilverLining-MTD-DLL.lib CACHE FILEPATH "Select the debug library of Sundog-Soft's Silverlining SDK to link against." )
	130	SET(SILVERLINING_INCLUDE_DIR "$ENV{SILVERLINING_PATH}\\Public Headers" CACHE PATH "Enter the path to the the public Include directory of Sundog-Soft's Silverlining SDK" )
	131	SET(SILVERLINING_LICENSEE "Your user name" CACHE STRING "Enter your Silverlining licensee name. If you license available, osgVisual will work with silverlining as 5 minute demo with the default value." )
	132	SET(SILVERLINING_LICENSE "Your license code" CACHE STRING "Enter your Silverlining license key. If you license available, osgVisual will work with silverlining as 5 minute demo with the default value." )
[104]	133	INCLUDE_DIRECTORIES(${SILVERLINING_INCLUDE_DIR} "include/sky_Silverlining" )
[88]	134	ADD_DEFINITIONS( "-DUSE_SKY_SILVERLINING" )
	135	ADD_DEFINITIONS( "-DSILVERLINING_LICENSEE=\"${SILVERLINING_LICENSEE}\"" )
	136	ADD_DEFINITIONS( "-DSILVERLINING_LICENSE=\"${SILVERLINING_LICENSE}\"" )
	137
	138	ELSE(USE_SKY_SILVERLINING)
	139	UNSET(SILVERLINING_LIBRARY_RELEASE CACHE)
	140	UNSET(SILVERLINING_LIBRARY_DEBUG CACHE)
	141	UNSET(SILVERLINING_INCLUDE_DIR CACHE)
	142	UNSET(SILVERLINING_LICENSEE)
	143	UNSET(SILVERLINING_LICENSE)
	144	ENDIF(USE_SKY_SILVERLINING)
	145	ENDIF()
[28]	146
	147	# Module distortion
	148	SET(USE_DISTORTION OFF CACHE BOOL "Enable to use distortion with Projection Designer's distortion maps")
	149	IF(USE_DISTORTION)
	150	SET(SOURCES
	151	${SOURCES}
	152	include/distortion/visual_distortion.h
	153	src/distortion/visual_distortion.cpp
	154	)
	155	INCLUDE_DIRECTORIES(include/distortion)
	156	ADD_DEFINITIONS( "-DUSE_DISTORTION" )
	157	ENDIF(USE_DISTORTION)
	158
	159
	160	# Module Vista2D - Only available under Win32
	161	if( WIN32 )
	162	SET(USE_VISTA2D OFF CACHE BOOL "Enable to use Vista2D by Wetzel Technology")
	163	IF( USE_VISTA2D )
	164	INCLUDE_DIRECTORIES( include/vista2D )
	165	SET(SOURCES
	166	${SOURCES}
	167	include/vista2D/visual_vista2D.h
	168	src/vista2D/visual_vista2D.cpp
	169	)
	170	SET(VISTA2D_INCLUDE_DIR . CACHE PATH "Select the INCLUDE directory path for Vista2D by Wetzel Technology." )
	171	SET(VISTA2D_LIBRARY_DEBUG . CACHE FILEPATH "Select debug LIBRARY path for linking against Vista2D by Wetzel Technology." )
	172	SET(VISTA2D_LIBRARY_RELEASE . CACHE FILEPATH "Select release LIBRARY path for linking against Vista2D by Wetzel Technology." )
	173	INCLUDE_DIRECTORIES(${VISTA2D_INCLUDE_DIR})
	174	ADD_DEFINITIONS( "-DUSE_VISTA2D" )
	175	ELSE(USE_VISTA2D)
	176	UNSET(VISTA2D_INCLUDE_DIR CACHE)
	177	UNSET(VISTA2D_LIBRARY_DEBUG CACHE)
	178	UNSET(VISTA2D_LIBRARY_RELEASE CACHE)
	179	ENDIF(USE_VISTA2D)
	180	ENDIF(WIN32)
	181
	182
	183	# Module Spacenavigator manipulator - ONLY under WIN32
	184	if( WIN32 )
	185	# No header or linking required, because WIN32 COM interface used.
	186	SET(USE_SPACEMOUSE ON CACHE BOOL "Enable to use camera manipulator based on Spacenavigator by 3DConnexion")
	187	IF( USE_SPACEMOUSE )
	188	SET(SOURCES
	189	${SOURCES}
	190	include/manip_Spacemouse/manip_spaceMouse.h
	191	include/manip_Spacemouse/manip_freeSpaceMouse.h
	192	include/manip_Spacemouse/manip_nodeTrackerSpaceMouse.h
	193	src/manip_Spacemouse/manip_spaceMouse.cpp
	194	src/manip_Spacemouse/manip_freeSpaceMouse.cpp
	195	src/manip_Spacemouse/manip_nodeTrackerSpaceMouse.cpp
	196	)
	197	INCLUDE_DIRECTORIES(include/manip_Spacemouse)
	198	ADD_DEFINITIONS( "-DUSE_SPACENAVIGATOR" )
	199	ENDIF(USE_SPACEMOUSE)
	200	ENDIF(WIN32)
	201
	202
	203	# Module cluster
[183]	204	SET(SOURCES
	205	${SOURCES}
	206	include/cluster/dataIO_cluster.h
	207	include/cluster/dataIO_clusterDummy.h
	208	src/cluster/dataIO_clusterDummy.cpp
	209	)
[65]	210	SET(USE_CLUSTER_ASIO_TCP_IOSTREAM OFF CACHE BOOL "Enable to use the Boost ASIO TCP iostream implementation for the cluster interface")
	211	SET(USE_CLUSTER_ENET ON CACHE BOOL "Enable to use the ENet reliable UDP library implementation for the cluster interface")
[58]	212	IF( USE_CLUSTER_ASIO_TCP_IOSTREAM )
[28]	213	SET(SOURCES
	214	${SOURCES}
[58]	215	include/cluster/dataIO_clusterAsioTcpIostream.h
	216	src/cluster/dataIO_clusterAsioTcpIostream.cpp
	217	)
	218	ADD_DEFINITIONS( "-DUSE_CLUSTER_ASIO_TCP_IOSTREAM" )
[60]	219	ADD_DEFINITIONS( "-D_WIN32_WINNT=0x0501" )
[181]	220	SET(BOOST_LIBRARY_PATH "../../../3rdParty_x86_x64/lib/${DESTINATION_ARCH}/" CACHE PATH "Select the library folder of Boost libraries to link against." )
	221	SET(BOOST_INCLUDE_DIR "../../../3rdParty_x86_x64/include/boost-1.43.0/" CACHE PATH "Enter the path to the the include directory of Boost" )
[60]	222	INCLUDE_DIRECTORIES(${BOOST_INCLUDE_DIR})
	223	LINK_DIRECTORIES(${BOOST_LIBRARY_PATH})
[58]	224	ELSE()
[60]	225	UNSET(BOOST_LIBRARY_PATH CACHE)
[58]	226	UNSET(BOOST_ASIO_INCLUDE_DIR CACHE)
	227	ENDIF()
	228
[65]	229	IF( USE_CLUSTER_ENET )
[58]	230	SET(SOURCES
	231	${SOURCES}
[65]	232	include/cluster/dataIO_clusterENet.h
	233	src/cluster/dataIO_clusterENet.cpp
	234	include/cluster/dataIO_clusterENet_implementation.h
	235	src/cluster/dataIO_clusterENet_implementation.cpp
	236	src/cluster/enet/callbacks.c
	237	src/cluster/enet/compress.c
	238	src/cluster/enet/host.c
	239	src/cluster/enet/list.c
	240	src/cluster/enet/packet.c
	241	src/cluster/enet/peer.c
	242	src/cluster/enet/protocol.c
	243	src/cluster/enet/unix.c
	244	src/cluster/enet/win32.c
	245	include/cluster/enet/callbacks.h
	246	include/cluster/enet/enet.h
	247	include/cluster/enet/list.h
	248	include/cluster/enet/protocol.h
	249	include/cluster/enet/time.h
	250	include/cluster/enet/types.h
	251	include/cluster/enet/unix.h
	252	include/cluster/enet/utility.h
	253	include/cluster/enet/win32.h
	254	)
[183]	255	ADD_DEFINITIONS( "-DUSE_CLUSTER_ENET" )
[65]	256	ENDIF()
	257
[28]	258
	259
[183]	260
[28]	261	# Module extLink
	262	SET(SOURCES
	263	${SOURCES}
[183]	264	include/extLink/dataIO_extLinkDummy.h
	265	src/extLink/dataIO_extLinkDummy.cpp
[28]	266	include/extLink/dataIO_extLink.h
	267	include/extLink/manip_extLink.h
	268	src/extLink/manip_extLink.cpp
	269	)
	270	IF ( WIN32 )
	271	SET(USE_EXTLINK_VCL ON CACHE BOOL "Enable to use the VCL Implementation for the externalLink interface")
	272	IF( USE_EXTLINK_VCL )
[181]	273	SET(EXTLINK_VCL_INCLUDE_DIR ../../VCL_1.0.3.4/source/include/VCL CACHE PATH "Select the INCLUDE directory path for extLink VCL Implementation." )
[28]	274	SET(SOURCES
	275	${SOURCES}
	276	include/extLink/dataIO_extLinkVCL.h
	277	src/extLink/dataIO_extLinkVCL.cpp
	278	)
	279	INCLUDE_DIRECTORIES(${EXTLINK_VCL_INCLUDE_DIR})
	280	ADD_DEFINITIONS( "-DUSE_EXTLINK_VCL" )
[51]	281	#Linking: VCL uses #pragma to link, no need for linking configuration in CMAKE
[28]	282	ELSE(USE_EXTLINK_VCL)
	283	UNSET(EXTLINK_VCL_INCLUDE_DIR CACHE)
	284	ENDIF(USE_EXTLINK_VCL)
	285	ELSE(WIN32)
	286	UNSET(EXTLINK_VCL_INCLUDE_DIR CACHE)
[183]	287
	288
[28]	289	ENDIF(WIN32)
	290
	291
	292
	293	# Set core sources
	294	SET(SOURCES
	295	${SOURCES}
	296	# Core
	297	include/core/visual_core.h
	298	src/core/visual_core.cpp
	299	src/core/osgVisual.cpp
[232]	300	include/core/core_manipulator.h
[231]	301	src/core/core_manipulator.cpp
[86]	302	# Memory Leak debugging
	303	include/core/leakDetection.h
[28]	304	# Util
	305	include/util/visual_util.h
	306	src/util/visual_util.cpp
[298]	307	include/util/terrainQuery.h
	308	src/util/terrainQuery.cpp
[28]	309	# Draw 2D
	310	include/draw2D/visual_draw2D.h
	311	src/draw2D/visual_draw2D.cpp
	312	# Debug HUD
	313	include/draw2D/visual_debug_hud.h
	314	src/draw2D/visual_debug_hud.cpp
	315	# Example HUD
	316	include/draw2D/visual_hud.h
	317	src/draw2D/visual_hud.cpp
	318	# Draw 3D
	319	include/draw3D/visual_draw3D.h
	320	src/draw3D/visual_draw3D.cpp
	321	# Object Mounted Manipulator
	322	include/manip_ObjectMounted/manip_objectMounted.h
	323	src/manip_ObjectMounted/manip_objectMounted.cpp
	324	# Objects
	325	include/object/visual_object.h
	326	include/object/object_updater.h
	327	src/object/visual_object.cpp
	328	src/object/object_updater.cpp
	329	# DataIO
	330	include/dataIO/visual_dataIO.h
	331	include/dataIO/dataIO_transportContainer.h
	332	include/dataIO/dataIO_slot.h
	333	include/dataIO/dataIO_executer.h
	334	src/dataIO/visual_dataIO.cpp
	335	src/dataIO/dataIO_transportContainer.cpp
	336	src/dataIO/dataIO_slot.cpp
	337	src/dataIO/dataIO_executer.cpp
	338	)
	339
[60]	340	INCLUDE_DIRECTORIES(include/core include/util include/draw2D include/draw3D include/object include/manip_ObjectMounted)
[28]	341	INCLUDE_DIRECTORIES(include/dataIO include/cluster include/extLink ${OPENSCENEGRAPH_INCLUDE_DIRS} .)
	342
	343
	344	# Executable Output
[106]	345	SET(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${CMAKE_SOURCE_DIR}/bin)
[28]	346	ADD_EXECUTABLE(osgVisual ${SOURCES})
	347
	348
	349	# Linking
[120]	350	TARGET_LINK_LIBRARIES(osgVisual ${OPENSCENEGRAPH_LIBRARIES} ${OPENGL_LIBRARIES} ${LIBXML2_LIBRARY})
[100]	351
	352
[28]	353	IF(USE_SKY_SILVERLINING )
[103]	354	IF(WIN32)
	355	TARGET_LINK_LIBRARIES(osgVisual "winmm.lib")
	356	ENDIF(WIN32)
	357	TARGET_LINK_LIBRARIES(osgVisual debug ${SILVERLINING_LIBRARY_DEBUG} optimized ${SILVERLINING_LIBRARY_RELEASE})
[28]	358	ENDIF(USE_SKY_SILVERLINING)
	359
	360	IF(USE_VISTA2D)
	361	TARGET_LINK_LIBRARIES(osgVisual debug ${VISTA2D_LIBRARY_DEBUG} optimized ${VISTA2D_LIBRARY_RELEASE})
	362	ENDIF(USE_VISTA2D)
	363
[104]	364	IF(USE_CLUSTER_ENET AND WIN32)
[65]	365	TARGET_LINK_LIBRARIES(osgVisual "winmm.lib" "ws2_32.lib" )
[104]	366	ENDIF(USE_CLUSTER_ENET AND WIN32)
[28]	367
	368	# CMAKE Fix for VS to not prepend build type to path.
[105]	369	IF(MSVC)
	370	SET_TARGET_PROPERTIES(osgVisual PROPERTIES PREFIX "../")
	371	ENDIF(MSVC)
[28]	372	SET_TARGET_PROPERTIES( osgVisual PROPERTIES DEBUG_POSTFIX d )
	373
[124]	374	# Adding definitions to disable multicore compiling
	375	IF(MSVC)
	376	SET(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /MP1")
	377	ENDIF(MSVC)
[28]	378
	379	# Generating vcproj file, if MSVC to preset debugging parameter - based on http://stackoverflow.com/questions/1005901/how-to-set-path-environment-variable-using-cmake-and-visual-studio-to-run-test
	380	IF (MSVC)
	381	# Set up a default .user file that contains the debugging setup
	382	## Find user and system name
	383	SET(SYSTEM_NAME $ENV{USERDOMAIN} CACHE STRING "Build System Name")
	384	SET(USER_NAME $ENV{USERNAME} CACHE STRING "Build System UserName")
	385	SET(USERFILE_COMMAND_DEBUG "$(TargetPath)" CACHE STRING "Command to execute on debugging (VS Project settings)" )
	386	SET(USERFILE_WORKING_DIRECTORY_DEBUG "bin" CACHE STRING "Working directory on debugging (VS Project settings)" )
[199]	387	SET(USERFILE_COMMAND_ARGUMENTS_DEBUG " --window 100 100 800 600 --config osgVisualConfig.xml" CACHE STRING "Command arguments (VS Project settings)" )
[28]	388	SET(USERFILE_REMOTE_MACHINE_DEBUG ${USER_NAME} CACHE STRING "Remote Debugging Machine (VS Project settings)")
[51]	389	IF (DESTINATION_ARCH STREQUAL "x64")
	390	SET(USERFILE_ENVIRONMENT "PATH=%OSG_X64%;%PATH%" CACHE STRING "Environment Variables that VS should merge on thy fly with system environment to run osgVisual (VS Project settings)")
	391	ENDIF ()
[28]	392
[51]	393
[28]	394	# Only do this if one doesn't already exist
	395	SET (USER_FILE ${PROJECT_NAME}.vcproj.${SYSTEM_NAME}.${USER_NAME}.user)
	396	IF (NOT EXISTS "${USER_FILE}")
	397	message (STATUS "Creating ${USER_FILE} with default debug settings")
	398	# These are the configuration variables
	399	IF (CMAKE_GENERATOR MATCHES "Win64")
	400	SET (USERFILE_PLATFORM "x64")
	401	ELSE ()
	402	SET (USERFILE_PLATFORM "Win32")
	403	ENDIF ()
	404
	405	# Configure the template file
	406	# MSC_VER 1300: MSC 13.0, VC 7.0, VS 2002
	407	# MSC_VER 1310: MSC 13.1, VC 7.1, VS 2003
	408	# MSC_VER 1400: MSC 14.0, VC 8.0, VS 2005
	409	# MSC_VER 1500: MSC 15.0, VC 9.0, VS 2008
	410	# MSC_VER 1600: MSC ??.0, VC 10.0, VS 2010
	411	IF (MSVC_VERSION EQUAL 1400)
	412	CONFIGURE_FILE(VC80.vcproj.user.template ${USER_FILE} @ONLY)
	413	ENDIF()
	414	IF (MSVC_VERSION EQUAL 1500)
	415	CONFIGURE_FILE(VC90.vcproj.user.template ${USER_FILE} @ONLY)
	416	ENDIF()
	417	ELSE()
	418	message (STATUS "Userfile ${USER_FILE} already exist: Skipping")
	419	ENDIF()
	420	ENDIF()
	421
	422

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: osgVisual/trunk/CMakeLists.txt @ 424

Download in other formats: