Context Navigation

source: osgVisual/trunk/CMakeLists.txt @ 238

Last change on this file since 238 was 232, checked in by Torben Dannhauer, 14 years ago

File size: 17.1 KB

Rev	Line
[52]	1	#################################################################################################
	2	# This file allows to configure osgVisual with CMAKE to generate native build solutions. #
	3	# #
	4	# Specify the following environment variables to use osgVisual and this CMAKE script: #
	5	# * OSG_ROOT: Path to your 32 bit (x86) OSG, e.g. D:\OSG\OpenSceneGraph-2.9.8_x86 #
	6	# * OSG_ROOT_X64: Path to your 64 bit (x64) OSG, e.g. D:\OSG\OpenSceneGraph-2.9.8_x64 #
	7	# * OSG: Path to your 32 bit (x86) OSG and 3rdParty binary folder, #
	8	# e.g. %OSG_ROOT%\bin;D:\OSG\3rdParty\bin\x86 #
	9	# * OSG_X64: Path to your 64 bit (x64) OSG and 3rdParty binary folder, #
	10	# e.g. %OSG_ROOT_X64%\bin;D:\OSG\3rdParty\bin\x64 #
	11	# * PATH: Extend with %OSG% or %OSG_X64% to use OSG and osgVisual from command line, #
	12	# e.g. PATH=%PATH%;%OSG% #
	13	# #
	14	# NOTE: On Visual Studio and x64 Arch, CMAKE uses the project settings to specify the #
	15	# correct x64 OSG path, so you can use osg as 32 bit in your system path. #
	16	# #
	17	# #
	18	#################################################################################################
	19
[28]	20	cmake_minimum_required(VERSION 2.8)
	21
[52]	22
[28]	23	PROJECT(osgVisual)
	24	#SET(CMAKE_MODULE_PATH "${osgVisual_SOURCE_DIR}/../CMakeModules;${CMAKE_MODULE_PATH}")
	25
[103]	26	# Check Architecture
[51]	27	IF( CMAKE_SIZEOF_VOID_P EQUAL 4 )
	28	MESSAGE( STATUS "32 bit architecture detected" )
	29	SET(DESTINATION_ARCH "x86")
	30	ENDIF()
	31	IF( CMAKE_SIZEOF_VOID_P EQUAL 8 )
	32	MESSAGE( STATUS "64 bit architecture detected" )
	33	SET(DESTINATION_ARCH "x64")
	34	ENDIF()
	35
[52]	36
[120]	37	# Get required packages
[52]	38	IF(DESTINATION_ARCH STREQUAL "x64")
	39	SET(OSG_ROOT_BKP $ENV{OSG_ROOT}) # BACKUP old OSG_ROOT
	40	SET(ENV{OSG_ROOT} $ENV{OSG_ROOT_X64}) # Replace OSGROOT with OSG_ROOT_X64 to force CMAKE to find the correct OSG version (64 bit)
	41	ENDIF ()
	42
	43	SET(OpenSceneGraph_MARK_AS_ADVANCED ON)
[120]	44	FIND_PACKAGE(OpenSceneGraph 2.9.9 REQUIRED osgViewer OpenThreads osgDB osgTerrain osgGA osgText osgSim osgUtil)
[28]	45	FIND_PACKAGE(OpenGL REQUIRED)
	46
[103]	47
[52]	48	IF(DESTINATION_ARCH STREQUAL "x64")
	49	SET(ENV{OSG_ROOT} ${OSG_ROOT_BKP}) # Restore old OSG_ROOT
	50	UNSET(OSG_ROOT_BKP) # Delete backup
	51	ENDIF ()
	52
[120]	53	# LIBXML2
[181]	54	SET(LIBXML2_LIBRARY ../../../OpenSceneGraph/3rdParty_x86_x64/${DESTINATION_ARCH}/lib/libxml2 CACHE FILEPATH "Select the libxml2 library to link osgVisual against. REQUIRED!" )
	55	SET(LIBXML2_INCLUDE ../../../OpenSceneGraph/3rdParty_x86_x64/${DESTINATION_ARCH}/include CACHE PATH "Select the libxml2 include path to link osgVisual against. REQUIRED!" )
[120]	56	INCLUDE_DIRECTORIES( ${LIBXML2_INCLUDE} )
[52]	57
[120]	58	# Module sky-silverlining
[28]	59	# OPTION( OPTION_VAR "description string" [initial value] )
	60	IF ( WIN32 )
	61
	62	SET(USE_SKY_SILVERLINING ON CACHE BOOL "Enable to use Sundog-soft's Silverlining SDK for sky & weather")
	63	IF(USE_SKY_SILVERLINING )
	64	SET(SOURCES
	65	${SOURCES}
	66	include/sky_Silverlining/skySilverLining_AtmosphereReference.h
[101]	67	include/sky_Silverlining/skySilverLining_cloudLayerSlot.h
[28]	68	include/sky_Silverlining/skySilverLining_cloudsDrawable.h
	69	include/sky_Silverlining/skySilverLining_ProjectionMatrixCallback.h
	70	include/sky_Silverlining/skySilverLining_skyDrawable.h
	71	include/sky_Silverlining/visual_skySilverLining.h
	72	src/sky_Silverlining/skySilverLining_cloudsDrawable.cpp
	73	src/sky_Silverlining/skySilverLining_skyDrawable.cpp
	74	src/sky_Silverlining/visual_skySilverLining.cpp
	75	)
	76
[51]	77	IF (DESTINATION_ARCH STREQUAL "x86")
	78	SET(SILVERLINING_ARCH "win32")
	79	ELSEIF ( DESTINATION_ARCH STREQUAL "x64" )
	80	SET(SILVERLINING_ARCH "x64")
	81	ENDIF ()
	82	SET(SILVERLINING_LIBRARY_RELEASE $ENV{SILVERLINING_PATH}\\lib\\vc9\\${SILVERLINING_ARCH}\\SilverLining-MT-DLL.lib CACHE FILEPATH "Select the release library of Sundog-Soft's Silverlining SDK to link against." )
	83	SET(SILVERLINING_LIBRARY_DEBUG $ENV{SILVERLINING_PATH}\\lib\\vc9\\${SILVERLINING_ARCH}\\SilverLining-MTD-DLL.lib CACHE FILEPATH "Select the debug library of Sundog-Soft's Silverlining SDK to link against." )
[28]	84	SET(SILVERLINING_INCLUDE_DIR "$ENV{SILVERLINING_PATH}\\Public Headers" CACHE PATH "Enter the path to the the public Include directory of Sundog-Soft's Silverlining SDK" )
	85	SET(SILVERLINING_LICENSEE "Your user name" CACHE STRING "Enter your Silverlining licensee name. If you license available, osgVisual will work with silverlining as 5 minute demo with the default value." )
	86	SET(SILVERLINING_LICENSE "Your license code" CACHE STRING "Enter your Silverlining license key. If you license available, osgVisual will work with silverlining as 5 minute demo with the default value." )
	87	INCLUDE_DIRECTORIES(${SILVERLINING_INCLUDE_DIR} include/sky_Silverlining)
	88	ADD_DEFINITIONS( "-DUSE_SKY_SILVERLINING" )
	89	ADD_DEFINITIONS( "-DSILVERLINING_LICENSEE=\"${SILVERLINING_LICENSEE}\"" )
	90	ADD_DEFINITIONS( "-DSILVERLINING_LICENSE=\"${SILVERLINING_LICENSE}\"" )
	91
	92	ELSE(USE_SKY_SILVERLINING)
	93	UNSET(SILVERLINING_LIBRARY_RELEASE CACHE)
	94	UNSET(SILVERLINING_LIBRARY_DEBUG CACHE)
	95	UNSET(SILVERLINING_INCLUDE_DIR CACHE)
	96	UNSET(SILVERLINING_LICENSEE)
	97	UNSET(SILVERLINING_LICENSE)
	98	ENDIF(USE_SKY_SILVERLINING)
	99	ENDIF(WIN32)
[100]	100	IF(UNIX)
[88]	101	SET(USE_SKY_SILVERLINING ON CACHE BOOL "Enable to use Sundog-soft's Silverlining SDK for sky & weather")
	102	IF(USE_SKY_SILVERLINING )
	103	SET(SOURCES
	104	${SOURCES}
	105	include/sky_Silverlining/skySilverLining_AtmosphereReference.h
[102]	106	include/sky_Silverlining/skySilverLining_cloudLayerSlot.h
[88]	107	include/sky_Silverlining/skySilverLining_cloudsDrawable.h
	108	include/sky_Silverlining/skySilverLining_ProjectionMatrixCallback.h
	109	include/sky_Silverlining/skySilverLining_skyDrawable.h
	110	include/sky_Silverlining/visual_skySilverLining.h
	111	src/sky_Silverlining/skySilverLining_cloudsDrawable.cpp
	112	src/sky_Silverlining/skySilverLining_skyDrawable.cpp
	113	src/sky_Silverlining/visual_skySilverLining.cpp
	114	)
	115
	116	IF (DESTINATION_ARCH STREQUAL "x86")
	117	SET(SILVERLINING_ARCH "win32")
	118	ELSEIF ( DESTINATION_ARCH STREQUAL "x64" )
	119	SET(SILVERLINING_ARCH "x64")
	120	ENDIF ()
	121	SET(SILVERLINING_LIBRARY_RELEASE $ENV{SILVERLINING_PATH}\\lib\\vc9\\${SILVERLINING_ARCH}\\SilverLining-MT-DLL.lib CACHE FILEPATH "Select the release library of Sundog-Soft's Silverlining SDK to link against." )
	122	SET(SILVERLINING_LIBRARY_DEBUG $ENV{SILVERLINING_PATH}\\lib\\vc9\\${SILVERLINING_ARCH}\\SilverLining-MTD-DLL.lib CACHE FILEPATH "Select the debug library of Sundog-Soft's Silverlining SDK to link against." )
	123	SET(SILVERLINING_INCLUDE_DIR "$ENV{SILVERLINING_PATH}\\Public Headers" CACHE PATH "Enter the path to the the public Include directory of Sundog-Soft's Silverlining SDK" )
	124	SET(SILVERLINING_LICENSEE "Your user name" CACHE STRING "Enter your Silverlining licensee name. If you license available, osgVisual will work with silverlining as 5 minute demo with the default value." )
	125	SET(SILVERLINING_LICENSE "Your license code" CACHE STRING "Enter your Silverlining license key. If you license available, osgVisual will work with silverlining as 5 minute demo with the default value." )
[104]	126	INCLUDE_DIRECTORIES(${SILVERLINING_INCLUDE_DIR} "include/sky_Silverlining" )
[88]	127	ADD_DEFINITIONS( "-DUSE_SKY_SILVERLINING" )
	128	ADD_DEFINITIONS( "-DSILVERLINING_LICENSEE=\"${SILVERLINING_LICENSEE}\"" )
	129	ADD_DEFINITIONS( "-DSILVERLINING_LICENSE=\"${SILVERLINING_LICENSE}\"" )
	130
	131	ELSE(USE_SKY_SILVERLINING)
	132	UNSET(SILVERLINING_LIBRARY_RELEASE CACHE)
	133	UNSET(SILVERLINING_LIBRARY_DEBUG CACHE)
	134	UNSET(SILVERLINING_INCLUDE_DIR CACHE)
	135	UNSET(SILVERLINING_LICENSEE)
	136	UNSET(SILVERLINING_LICENSE)
	137	ENDIF(USE_SKY_SILVERLINING)
	138	ENDIF()
[28]	139
	140	# Module distortion
	141	SET(USE_DISTORTION OFF CACHE BOOL "Enable to use distortion with Projection Designer's distortion maps")
	142	IF(USE_DISTORTION)
	143	SET(SOURCES
	144	${SOURCES}
	145	include/distortion/visual_distortion.h
	146	src/distortion/visual_distortion.cpp
	147	)
	148	INCLUDE_DIRECTORIES(include/distortion)
	149	ADD_DEFINITIONS( "-DUSE_DISTORTION" )
	150	ENDIF(USE_DISTORTION)
	151
	152
	153	# Module Vista2D - Only available under Win32
	154	if( WIN32 )
	155	SET(USE_VISTA2D OFF CACHE BOOL "Enable to use Vista2D by Wetzel Technology")
	156	IF( USE_VISTA2D )
	157	INCLUDE_DIRECTORIES( include/vista2D )
	158	SET(SOURCES
	159	${SOURCES}
	160	include/vista2D/visual_vista2D.h
	161	src/vista2D/visual_vista2D.cpp
	162	)
	163	SET(VISTA2D_INCLUDE_DIR . CACHE PATH "Select the INCLUDE directory path for Vista2D by Wetzel Technology." )
	164	SET(VISTA2D_LIBRARY_DEBUG . CACHE FILEPATH "Select debug LIBRARY path for linking against Vista2D by Wetzel Technology." )
	165	SET(VISTA2D_LIBRARY_RELEASE . CACHE FILEPATH "Select release LIBRARY path for linking against Vista2D by Wetzel Technology." )
	166	INCLUDE_DIRECTORIES(${VISTA2D_INCLUDE_DIR})
	167	ADD_DEFINITIONS( "-DUSE_VISTA2D" )
	168	ELSE(USE_VISTA2D)
	169	UNSET(VISTA2D_INCLUDE_DIR CACHE)
	170	UNSET(VISTA2D_LIBRARY_DEBUG CACHE)
	171	UNSET(VISTA2D_LIBRARY_RELEASE CACHE)
	172	ENDIF(USE_VISTA2D)
	173	ENDIF(WIN32)
	174
	175
	176	# Module Spacenavigator manipulator - ONLY under WIN32
	177	if( WIN32 )
	178	# No header or linking required, because WIN32 COM interface used.
	179	SET(USE_SPACEMOUSE ON CACHE BOOL "Enable to use camera manipulator based on Spacenavigator by 3DConnexion")
	180	IF( USE_SPACEMOUSE )
	181	SET(SOURCES
	182	${SOURCES}
	183	include/manip_Spacemouse/manip_spaceMouse.h
	184	include/manip_Spacemouse/manip_freeSpaceMouse.h
	185	include/manip_Spacemouse/manip_nodeTrackerSpaceMouse.h
	186	src/manip_Spacemouse/manip_spaceMouse.cpp
	187	src/manip_Spacemouse/manip_freeSpaceMouse.cpp
	188	src/manip_Spacemouse/manip_nodeTrackerSpaceMouse.cpp
	189	)
	190	INCLUDE_DIRECTORIES(include/manip_Spacemouse)
	191	ADD_DEFINITIONS( "-DUSE_SPACENAVIGATOR" )
	192	ENDIF(USE_SPACEMOUSE)
	193	ENDIF(WIN32)
	194
	195
	196	# Module cluster
[183]	197	SET(SOURCES
	198	${SOURCES}
	199	include/cluster/dataIO_cluster.h
	200	include/cluster/dataIO_clusterDummy.h
	201	src/cluster/dataIO_clusterDummy.cpp
	202	)
[65]	203	SET(USE_CLUSTER_ASIO_TCP_IOSTREAM OFF CACHE BOOL "Enable to use the Boost ASIO TCP iostream implementation for the cluster interface")
	204	SET(USE_CLUSTER_ENET ON CACHE BOOL "Enable to use the ENet reliable UDP library implementation for the cluster interface")
[58]	205	IF( USE_CLUSTER_ASIO_TCP_IOSTREAM )
[28]	206	SET(SOURCES
	207	${SOURCES}
[58]	208	include/cluster/dataIO_clusterAsioTcpIostream.h
	209	src/cluster/dataIO_clusterAsioTcpIostream.cpp
	210	)
	211	ADD_DEFINITIONS( "-DUSE_CLUSTER_ASIO_TCP_IOSTREAM" )
[60]	212	ADD_DEFINITIONS( "-D_WIN32_WINNT=0x0501" )
[181]	213	SET(BOOST_LIBRARY_PATH "../../../3rdParty_x86_x64/lib/${DESTINATION_ARCH}/" CACHE PATH "Select the library folder of Boost libraries to link against." )
	214	SET(BOOST_INCLUDE_DIR "../../../3rdParty_x86_x64/include/boost-1.43.0/" CACHE PATH "Enter the path to the the include directory of Boost" )
[60]	215	INCLUDE_DIRECTORIES(${BOOST_INCLUDE_DIR})
	216	LINK_DIRECTORIES(${BOOST_LIBRARY_PATH})
[58]	217	ELSE()
[60]	218	UNSET(BOOST_LIBRARY_PATH CACHE)
[58]	219	UNSET(BOOST_ASIO_INCLUDE_DIR CACHE)
	220	ENDIF()
	221
[65]	222	IF( USE_CLUSTER_ENET )
[58]	223	SET(SOURCES
	224	${SOURCES}
[65]	225	include/cluster/dataIO_clusterENet.h
	226	src/cluster/dataIO_clusterENet.cpp
	227	include/cluster/dataIO_clusterENet_implementation.h
	228	src/cluster/dataIO_clusterENet_implementation.cpp
	229	src/cluster/enet/callbacks.c
	230	src/cluster/enet/compress.c
	231	src/cluster/enet/host.c
	232	src/cluster/enet/list.c
	233	src/cluster/enet/packet.c
	234	src/cluster/enet/peer.c
	235	src/cluster/enet/protocol.c
	236	src/cluster/enet/unix.c
	237	src/cluster/enet/win32.c
	238	include/cluster/enet/callbacks.h
	239	include/cluster/enet/enet.h
	240	include/cluster/enet/list.h
	241	include/cluster/enet/protocol.h
	242	include/cluster/enet/time.h
	243	include/cluster/enet/types.h
	244	include/cluster/enet/unix.h
	245	include/cluster/enet/utility.h
	246	include/cluster/enet/win32.h
	247	)
[183]	248	ADD_DEFINITIONS( "-DUSE_CLUSTER_ENET" )
[65]	249	ENDIF()
	250
[28]	251
	252
[183]	253
[28]	254	# Module extLink
	255	SET(SOURCES
	256	${SOURCES}
[183]	257	include/extLink/dataIO_extLinkDummy.h
	258	src/extLink/dataIO_extLinkDummy.cpp
[28]	259	include/extLink/dataIO_extLink.h
	260	include/extLink/manip_extLink.h
	261	src/extLink/manip_extLink.cpp
	262	)
	263	IF ( WIN32 )
	264	SET(USE_EXTLINK_VCL ON CACHE BOOL "Enable to use the VCL Implementation for the externalLink interface")
	265	IF( USE_EXTLINK_VCL )
[181]	266	SET(EXTLINK_VCL_INCLUDE_DIR ../../VCL_1.0.3.4/source/include/VCL CACHE PATH "Select the INCLUDE directory path for extLink VCL Implementation." )
[28]	267	SET(SOURCES
	268	${SOURCES}
	269	include/extLink/dataIO_extLinkVCL.h
	270	src/extLink/dataIO_extLinkVCL.cpp
	271	)
	272	INCLUDE_DIRECTORIES(${EXTLINK_VCL_INCLUDE_DIR})
	273	ADD_DEFINITIONS( "-DUSE_EXTLINK_VCL" )
[51]	274	#Linking: VCL uses #pragma to link, no need for linking configuration in CMAKE
[28]	275	ELSE(USE_EXTLINK_VCL)
	276	UNSET(EXTLINK_VCL_INCLUDE_DIR CACHE)
	277	ENDIF(USE_EXTLINK_VCL)
	278	ELSE(WIN32)
	279	UNSET(EXTLINK_VCL_INCLUDE_DIR CACHE)
[183]	280
	281
[28]	282	ENDIF(WIN32)
	283
	284
	285
	286	# Set core sources
	287	SET(SOURCES
	288	${SOURCES}
	289	# Core
	290	include/core/visual_core.h
	291	src/core/visual_core.cpp
	292	src/core/osgVisual.cpp
[232]	293	include/core/core_manipulator.h
[231]	294	src/core/core_manipulator.cpp
[86]	295	# Memory Leak debugging
	296	include/core/leakDetection.h
[28]	297	# Util
	298	include/util/visual_util.h
	299	src/util/visual_util.cpp
	300	# Draw 2D
	301	include/draw2D/visual_draw2D.h
	302	src/draw2D/visual_draw2D.cpp
	303	# Debug HUD
	304	include/draw2D/visual_debug_hud.h
	305	src/draw2D/visual_debug_hud.cpp
	306	# Example HUD
	307	include/draw2D/visual_hud.h
	308	src/draw2D/visual_hud.cpp
	309	# Draw 3D
	310	include/draw3D/visual_draw3D.h
	311	src/draw3D/visual_draw3D.cpp
	312	# Object Mounted Manipulator
	313	include/manip_ObjectMounted/manip_objectMounted.h
	314	src/manip_ObjectMounted/manip_objectMounted.cpp
	315	# Objects
	316	include/object/visual_object.h
	317	include/object/object_updater.h
	318	src/object/visual_object.cpp
	319	src/object/object_updater.cpp
	320	# DataIO
	321	include/dataIO/visual_dataIO.h
	322	include/dataIO/dataIO_transportContainer.h
	323	include/dataIO/dataIO_slot.h
	324	include/dataIO/dataIO_executer.h
	325	src/dataIO/visual_dataIO.cpp
	326	src/dataIO/dataIO_transportContainer.cpp
	327	src/dataIO/dataIO_slot.cpp
	328	src/dataIO/dataIO_executer.cpp
	329	)
	330
[60]	331	INCLUDE_DIRECTORIES(include/core include/util include/draw2D include/draw3D include/object include/manip_ObjectMounted)
[28]	332	INCLUDE_DIRECTORIES(include/dataIO include/cluster include/extLink ${OPENSCENEGRAPH_INCLUDE_DIRS} .)
	333
	334
	335	# Executable Output
[106]	336	SET(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${CMAKE_SOURCE_DIR}/bin)
[28]	337	ADD_EXECUTABLE(osgVisual ${SOURCES})
	338
	339
	340	# Linking
[120]	341	TARGET_LINK_LIBRARIES(osgVisual ${OPENSCENEGRAPH_LIBRARIES} ${OPENGL_LIBRARIES} ${LIBXML2_LIBRARY})
[100]	342
	343
[28]	344	IF(USE_SKY_SILVERLINING )
[103]	345	IF(WIN32)
	346	TARGET_LINK_LIBRARIES(osgVisual "winmm.lib")
	347	ENDIF(WIN32)
	348	TARGET_LINK_LIBRARIES(osgVisual debug ${SILVERLINING_LIBRARY_DEBUG} optimized ${SILVERLINING_LIBRARY_RELEASE})
[28]	349	ENDIF(USE_SKY_SILVERLINING)
	350
	351	IF(USE_VISTA2D)
	352	TARGET_LINK_LIBRARIES(osgVisual debug ${VISTA2D_LIBRARY_DEBUG} optimized ${VISTA2D_LIBRARY_RELEASE})
	353	ENDIF(USE_VISTA2D)
	354
[104]	355	IF(USE_CLUSTER_ENET AND WIN32)
[65]	356	TARGET_LINK_LIBRARIES(osgVisual "winmm.lib" "ws2_32.lib" )
[104]	357	ENDIF(USE_CLUSTER_ENET AND WIN32)
[28]	358
	359	# CMAKE Fix for VS to not prepend build type to path.
[105]	360	IF(MSVC)
	361	SET_TARGET_PROPERTIES(osgVisual PROPERTIES PREFIX "../")
	362	ENDIF(MSVC)
[28]	363	SET_TARGET_PROPERTIES( osgVisual PROPERTIES DEBUG_POSTFIX d )
	364
[124]	365	# Adding definitions to disable multicore compiling
	366	IF(MSVC)
	367	SET(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /MP1")
	368	ENDIF(MSVC)
[28]	369
	370	# Generating vcproj file, if MSVC to preset debugging parameter - based on http://stackoverflow.com/questions/1005901/how-to-set-path-environment-variable-using-cmake-and-visual-studio-to-run-test
	371	IF (MSVC)
	372	# Set up a default .user file that contains the debugging setup
	373	## Find user and system name
	374	SET(SYSTEM_NAME $ENV{USERDOMAIN} CACHE STRING "Build System Name")
	375	SET(USER_NAME $ENV{USERNAME} CACHE STRING "Build System UserName")
	376	SET(USERFILE_COMMAND_DEBUG "$(TargetPath)" CACHE STRING "Command to execute on debugging (VS Project settings)" )
	377	SET(USERFILE_WORKING_DIRECTORY_DEBUG "bin" CACHE STRING "Working directory on debugging (VS Project settings)" )
[199]	378	SET(USERFILE_COMMAND_ARGUMENTS_DEBUG " --window 100 100 800 600 --config osgVisualConfig.xml" CACHE STRING "Command arguments (VS Project settings)" )
[28]	379	SET(USERFILE_REMOTE_MACHINE_DEBUG ${USER_NAME} CACHE STRING "Remote Debugging Machine (VS Project settings)")
[51]	380	IF (DESTINATION_ARCH STREQUAL "x64")
	381	SET(USERFILE_ENVIRONMENT "PATH=%OSG_X64%;%PATH%" CACHE STRING "Environment Variables that VS should merge on thy fly with system environment to run osgVisual (VS Project settings)")
	382	ENDIF ()
[28]	383
[51]	384
[28]	385	# Only do this if one doesn't already exist
	386	SET (USER_FILE ${PROJECT_NAME}.vcproj.${SYSTEM_NAME}.${USER_NAME}.user)
	387	IF (NOT EXISTS "${USER_FILE}")
	388	message (STATUS "Creating ${USER_FILE} with default debug settings")
	389	# These are the configuration variables
	390	IF (CMAKE_GENERATOR MATCHES "Win64")
	391	SET (USERFILE_PLATFORM "x64")
	392	ELSE ()
	393	SET (USERFILE_PLATFORM "Win32")
	394	ENDIF ()
	395
	396	# Configure the template file
	397	# MSC_VER 1300: MSC 13.0, VC 7.0, VS 2002
	398	# MSC_VER 1310: MSC 13.1, VC 7.1, VS 2003
	399	# MSC_VER 1400: MSC 14.0, VC 8.0, VS 2005
	400	# MSC_VER 1500: MSC 15.0, VC 9.0, VS 2008
	401	# MSC_VER 1600: MSC ??.0, VC 10.0, VS 2010
	402	IF (MSVC_VERSION EQUAL 1400)
	403	CONFIGURE_FILE(VC80.vcproj.user.template ${USER_FILE} @ONLY)
	404	ENDIF()
	405	IF (MSVC_VERSION EQUAL 1500)
	406	CONFIGURE_FILE(VC90.vcproj.user.template ${USER_FILE} @ONLY)
	407	ENDIF()
	408	ELSE()
	409	message (STATUS "Userfile ${USER_FILE} already exist: Skipping")
	410	ENDIF()
	411	ENDIF()
	412
	413

Note: See TracBrowser for help on using the repository browser.

Download in other formats: