Context Navigation

source: osgVisual/CMakeLists.txt @ 121

Last change on this file since 121 was 120, checked in by Torben Dannhauer, 14 years ago
Added dynamic channel processing on the extLinkVCL Mpdule. Added libxml2 to CMakeLists.txt.
File size: 17.4 KB

Line
1	#################################################################################################
2	# This file allows to configure osgVisual with CMAKE to generate native build solutions. #
3	# #
4	# Specify the following environment variables to use osgVisual and this CMAKE script: #
5	# * OSG_ROOT: Path to your 32 bit (x86) OSG, e.g. D:\OSG\OpenSceneGraph-2.9.8_x86 #
6	# * OSG_ROOT_X64: Path to your 64 bit (x64) OSG, e.g. D:\OSG\OpenSceneGraph-2.9.8_x64 #
7	# * OSG: Path to your 32 bit (x86) OSG and 3rdParty binary folder, #
8	# e.g. %OSG_ROOT%\bin;D:\OSG\3rdParty\bin\x86 #
9	# * OSG_X64: Path to your 64 bit (x64) OSG and 3rdParty binary folder, #
10	# e.g. %OSG_ROOT_X64%\bin;D:\OSG\3rdParty\bin\x64 #
11	# * PATH: Extend with %OSG% or %OSG_X64% to use OSG and osgVisual from command line, #
12	# e.g. PATH=%PATH%;%OSG% #
13	# #
14	# NOTE: On Visual Studio and x64 Arch, CMAKE uses the project settings to specify the #
15	# correct x64 OSG path, so you can use osg as 32 bit in your system path. #
16	# #
17	# #
18	#################################################################################################
19
20	cmake_minimum_required(VERSION 2.8)
21
22
23	PROJECT(osgVisual)
24	#SET(CMAKE_MODULE_PATH "${osgVisual_SOURCE_DIR}/../CMakeModules;${CMAKE_MODULE_PATH}")
25
26	# Check Architecture
27	IF( CMAKE_SIZEOF_VOID_P EQUAL 4 )
28	MESSAGE( STATUS "32 bit architecture detected" )
29	SET(DESTINATION_ARCH "x86")
30	ENDIF()
31	IF( CMAKE_SIZEOF_VOID_P EQUAL 8 )
32	MESSAGE( STATUS "64 bit architecture detected" )
33	SET(DESTINATION_ARCH "x64")
34	ENDIF()
35
36
37	# Get required packages
38	IF(DESTINATION_ARCH STREQUAL "x64")
39	SET(OSG_ROOT_BKP $ENV{OSG_ROOT}) # BACKUP old OSG_ROOT
40	SET(ENV{OSG_ROOT} $ENV{OSG_ROOT_X64}) # Replace OSGROOT with OSG_ROOT_X64 to force CMAKE to find the correct OSG version (64 bit)
41	ENDIF ()
42
43	SET(OpenSceneGraph_MARK_AS_ADVANCED ON)
44	FIND_PACKAGE(OpenSceneGraph 2.9.9 REQUIRED osgViewer OpenThreads osgDB osgTerrain osgGA osgText osgSim osgUtil)
45	FIND_PACKAGE(OpenGL REQUIRED)
46
47
48	IF(DESTINATION_ARCH STREQUAL "x64")
49	SET(ENV{OSG_ROOT} ${OSG_ROOT_BKP}) # Restore old OSG_ROOT
50	UNSET(OSG_ROOT_BKP) # Delete backup
51	ENDIF ()
52
53	# LIBXML2
54	SET(LIBXML2_LIBRARY ../../OpenSceneGraph/3rdParty_x86_x64/${DESTINATION_ARCH}/lib/libxml2 CACHE FILEPATH "Select the libxml2 library to link osgVisual against. REQUIRED!" )
55	SET(LIBXML2_INCLUDE ../../OpenSceneGraph/3rdParty_x86_x64/${DESTINATION_ARCH}/include CACHE PATH "Select the libxml2 include path to link osgVisual against. REQUIRED!" )
56	INCLUDE_DIRECTORIES( ${LIBXML2_INCLUDE} )
57
58	# Module sky-silverlining
59	# OPTION( OPTION_VAR "description string" [initial value] )
60	IF ( WIN32 )
61
62	SET(USE_SKY_SILVERLINING ON CACHE BOOL "Enable to use Sundog-soft's Silverlining SDK for sky & weather")
63	IF(USE_SKY_SILVERLINING )
64	SET(SOURCES
65	${SOURCES}
66	include/sky_Silverlining/skySilverLining_AtmosphereReference.h
67	include/sky_Silverlining/skySilverLining_cloudLayerSlot.h
68	include/sky_Silverlining/skySilverLining_cloudsDrawable.h
69	include/sky_Silverlining/skySilverLining_ProjectionMatrixCallback.h
70	include/sky_Silverlining/skySilverLining_skyDrawable.h
71	include/sky_Silverlining/visual_skySilverLining.h
72	src/sky_Silverlining/skySilverLining_cloudsDrawable.cpp
73	src/sky_Silverlining/skySilverLining_skyDrawable.cpp
74	src/sky_Silverlining/visual_skySilverLining.cpp
75	)
76
77	IF (DESTINATION_ARCH STREQUAL "x86")
78	SET(SILVERLINING_ARCH "win32")
79	ELSEIF ( DESTINATION_ARCH STREQUAL "x64" )
80	SET(SILVERLINING_ARCH "x64")
81	ENDIF ()
82	SET(SILVERLINING_LIBRARY_RELEASE $ENV{SILVERLINING_PATH}\\lib\\vc9\\${SILVERLINING_ARCH}\\SilverLining-MT-DLL.lib CACHE FILEPATH "Select the release library of Sundog-Soft's Silverlining SDK to link against." )
83	SET(SILVERLINING_LIBRARY_DEBUG $ENV{SILVERLINING_PATH}\\lib\\vc9\\${SILVERLINING_ARCH}\\SilverLining-MTD-DLL.lib CACHE FILEPATH "Select the debug library of Sundog-Soft's Silverlining SDK to link against." )
84	SET(SILVERLINING_INCLUDE_DIR "$ENV{SILVERLINING_PATH}\\Public Headers" CACHE PATH "Enter the path to the the public Include directory of Sundog-Soft's Silverlining SDK" )
85	SET(SILVERLINING_LICENSEE "Your user name" CACHE STRING "Enter your Silverlining licensee name. If you license available, osgVisual will work with silverlining as 5 minute demo with the default value." )
86	SET(SILVERLINING_LICENSE "Your license code" CACHE STRING "Enter your Silverlining license key. If you license available, osgVisual will work with silverlining as 5 minute demo with the default value." )
87	INCLUDE_DIRECTORIES(${SILVERLINING_INCLUDE_DIR} include/sky_Silverlining)
88	ADD_DEFINITIONS( "-DUSE_SKY_SILVERLINING" )
89	ADD_DEFINITIONS( "-DSILVERLINING_LICENSEE=\"${SILVERLINING_LICENSEE}\"" )
90	ADD_DEFINITIONS( "-DSILVERLINING_LICENSE=\"${SILVERLINING_LICENSE}\"" )
91
92	ELSE(USE_SKY_SILVERLINING)
93	UNSET(SILVERLINING_LIBRARY_RELEASE CACHE)
94	UNSET(SILVERLINING_LIBRARY_DEBUG CACHE)
95	UNSET(SILVERLINING_INCLUDE_DIR CACHE)
96	UNSET(SILVERLINING_LICENSEE)
97	UNSET(SILVERLINING_LICENSE)
98	ENDIF(USE_SKY_SILVERLINING)
99	ENDIF(WIN32)
100	IF(UNIX)
101	SET(USE_SKY_SILVERLINING ON CACHE BOOL "Enable to use Sundog-soft's Silverlining SDK for sky & weather")
102	IF(USE_SKY_SILVERLINING )
103	SET(SOURCES
104	${SOURCES}
105	include/sky_Silverlining/skySilverLining_AtmosphereReference.h
106	include/sky_Silverlining/skySilverLining_cloudLayerSlot.h
107	include/sky_Silverlining/skySilverLining_cloudsDrawable.h
108	include/sky_Silverlining/skySilverLining_ProjectionMatrixCallback.h
109	include/sky_Silverlining/skySilverLining_skyDrawable.h
110	include/sky_Silverlining/visual_skySilverLining.h
111	src/sky_Silverlining/skySilverLining_cloudsDrawable.cpp
112	src/sky_Silverlining/skySilverLining_skyDrawable.cpp
113	src/sky_Silverlining/visual_skySilverLining.cpp
114	)
115
116	IF (DESTINATION_ARCH STREQUAL "x86")
117	SET(SILVERLINING_ARCH "win32")
118	ELSEIF ( DESTINATION_ARCH STREQUAL "x64" )
119	SET(SILVERLINING_ARCH "x64")
120	ENDIF ()
121	SET(SILVERLINING_LIBRARY_RELEASE $ENV{SILVERLINING_PATH}\\lib\\vc9\\${SILVERLINING_ARCH}\\SilverLining-MT-DLL.lib CACHE FILEPATH "Select the release library of Sundog-Soft's Silverlining SDK to link against." )
122	SET(SILVERLINING_LIBRARY_DEBUG $ENV{SILVERLINING_PATH}\\lib\\vc9\\${SILVERLINING_ARCH}\\SilverLining-MTD-DLL.lib CACHE FILEPATH "Select the debug library of Sundog-Soft's Silverlining SDK to link against." )
123	SET(SILVERLINING_INCLUDE_DIR "$ENV{SILVERLINING_PATH}\\Public Headers" CACHE PATH "Enter the path to the the public Include directory of Sundog-Soft's Silverlining SDK" )
124	SET(SILVERLINING_LICENSEE "Your user name" CACHE STRING "Enter your Silverlining licensee name. If you license available, osgVisual will work with silverlining as 5 minute demo with the default value." )
125	SET(SILVERLINING_LICENSE "Your license code" CACHE STRING "Enter your Silverlining license key. If you license available, osgVisual will work with silverlining as 5 minute demo with the default value." )
126	INCLUDE_DIRECTORIES(${SILVERLINING_INCLUDE_DIR} "include/sky_Silverlining" )
127	ADD_DEFINITIONS( "-DUSE_SKY_SILVERLINING" )
128	ADD_DEFINITIONS( "-DSILVERLINING_LICENSEE=\"${SILVERLINING_LICENSEE}\"" )
129	ADD_DEFINITIONS( "-DSILVERLINING_LICENSE=\"${SILVERLINING_LICENSE}\"" )
130
131	ELSE(USE_SKY_SILVERLINING)
132	UNSET(SILVERLINING_LIBRARY_RELEASE CACHE)
133	UNSET(SILVERLINING_LIBRARY_DEBUG CACHE)
134	UNSET(SILVERLINING_INCLUDE_DIR CACHE)
135	UNSET(SILVERLINING_LICENSEE)
136	UNSET(SILVERLINING_LICENSE)
137	ENDIF(USE_SKY_SILVERLINING)
138	ENDIF()
139
140	# Module distortion
141	SET(USE_DISTORTION OFF CACHE BOOL "Enable to use distortion with Projection Designer's distortion maps")
142	IF(USE_DISTORTION)
143	SET(SOURCES
144	${SOURCES}
145	include/distortion/visual_distortion.h
146	src/distortion/visual_distortion.cpp
147	)
148	INCLUDE_DIRECTORIES(include/distortion)
149	ADD_DEFINITIONS( "-DUSE_DISTORTION" )
150	ENDIF(USE_DISTORTION)
151
152
153	# Module Vista2D - Only available under Win32
154	if( WIN32 )
155	SET(USE_VISTA2D OFF CACHE BOOL "Enable to use Vista2D by Wetzel Technology")
156	IF( USE_VISTA2D )
157	INCLUDE_DIRECTORIES( include/vista2D )
158	SET(SOURCES
159	${SOURCES}
160	include/vista2D/visual_vista2D.h
161	src/vista2D/visual_vista2D.cpp
162	)
163	SET(VISTA2D_INCLUDE_DIR . CACHE PATH "Select the INCLUDE directory path for Vista2D by Wetzel Technology." )
164	SET(VISTA2D_LIBRARY_DEBUG . CACHE FILEPATH "Select debug LIBRARY path for linking against Vista2D by Wetzel Technology." )
165	SET(VISTA2D_LIBRARY_RELEASE . CACHE FILEPATH "Select release LIBRARY path for linking against Vista2D by Wetzel Technology." )
166	INCLUDE_DIRECTORIES(${VISTA2D_INCLUDE_DIR})
167	ADD_DEFINITIONS( "-DUSE_VISTA2D" )
168	ELSE(USE_VISTA2D)
169	UNSET(VISTA2D_INCLUDE_DIR CACHE)
170	UNSET(VISTA2D_LIBRARY_DEBUG CACHE)
171	UNSET(VISTA2D_LIBRARY_RELEASE CACHE)
172	ENDIF(USE_VISTA2D)
173	ENDIF(WIN32)
174
175
176	# Module Spacenavigator manipulator - ONLY under WIN32
177	if( WIN32 )
178	# No header or linking required, because WIN32 COM interface used.
179	SET(USE_SPACEMOUSE ON CACHE BOOL "Enable to use camera manipulator based on Spacenavigator by 3DConnexion")
180	IF( USE_SPACEMOUSE )
181	SET(SOURCES
182	${SOURCES}
183	include/manip_Spacemouse/manip_spaceMouse.h
184	include/manip_Spacemouse/manip_freeSpaceMouse.h
185	include/manip_Spacemouse/manip_nodeTrackerSpaceMouse.h
186	src/manip_Spacemouse/manip_spaceMouse.cpp
187	src/manip_Spacemouse/manip_freeSpaceMouse.cpp
188	src/manip_Spacemouse/manip_nodeTrackerSpaceMouse.cpp
189	)
190	INCLUDE_DIRECTORIES(include/manip_Spacemouse)
191	ADD_DEFINITIONS( "-DUSE_SPACENAVIGATOR" )
192	ENDIF(USE_SPACEMOUSE)
193	ENDIF(WIN32)
194
195
196	# Module cluster
197	SET(USE_CLUSTER_ASIO_TCP_IOSTREAM OFF CACHE BOOL "Enable to use the Boost ASIO TCP iostream implementation for the cluster interface")
198	SET(USE_CLUSTER_ENET ON CACHE BOOL "Enable to use the ENet reliable UDP library implementation for the cluster interface")
199	IF( USE_CLUSTER_ASIO_TCP_IOSTREAM )
200	SET(SOURCES
201	${SOURCES}
202	include/cluster/dataIO_cluster.h
203	include/cluster/dataIO_clusterAsioTcpIostream.h
204	src/cluster/dataIO_clusterAsioTcpIostream.cpp
205	)
206	ADD_DEFINITIONS( "-DUSE_CLUSTER_ASIO_TCP_IOSTREAM" )
207	ADD_DEFINITIONS( "-D_WIN32_WINNT=0x0501" )
208	SET(BOOST_LIBRARY_PATH "../../3rdParty_x86_x64/lib/${DESTINATION_ARCH}/" CACHE PATH "Select the library folder of Boost libraries to link against." )
209	SET(BOOST_INCLUDE_DIR "../../3rdParty_x86_x64/include/boost-1.43.0/" CACHE PATH "Enter the path to the the include directory of Boost" )
210	INCLUDE_DIRECTORIES(${BOOST_INCLUDE_DIR})
211	LINK_DIRECTORIES(${BOOST_LIBRARY_PATH})
212	ELSE()
213	UNSET(BOOST_LIBRARY_PATH CACHE)
214	UNSET(BOOST_ASIO_INCLUDE_DIR CACHE)
215	ENDIF()
216
217	IF( USE_CLUSTER_ENET )
218	SET(SOURCES
219	${SOURCES}
220	include/cluster/dataIO_cluster.h
221	include/cluster/dataIO_clusterENet.h
222	src/cluster/dataIO_clusterENet.cpp
223	include/cluster/dataIO_clusterENet_implementation.h
224	src/cluster/dataIO_clusterENet_implementation.cpp
225	src/cluster/enet/callbacks.c
226	src/cluster/enet/compress.c
227	src/cluster/enet/host.c
228	src/cluster/enet/list.c
229	src/cluster/enet/packet.c
230	src/cluster/enet/peer.c
231	src/cluster/enet/protocol.c
232	src/cluster/enet/unix.c
233	src/cluster/enet/win32.c
234	include/cluster/enet/callbacks.h
235	include/cluster/enet/enet.h
236	include/cluster/enet/list.h
237	include/cluster/enet/protocol.h
238	include/cluster/enet/time.h
239	include/cluster/enet/types.h
240	include/cluster/enet/unix.h
241	include/cluster/enet/utility.h
242	include/cluster/enet/win32.h
243	)
244	ADD_DEFINITIONS( "-DUSE_CLUSTER_ENET" )
245
246	ENDIF()
247
248	IF(NOT USE_CLUSTER_ASIO_TCP_IOSTREAM AND NOT USE_CLUSTER_ENET)
249	SET(SOURCES
250	${SOURCES}
251	include/cluster/dataIO_cluster.h
252	include/cluster/dataIO_clusterDummy.h
253	src/cluster/dataIO_clusterDummy.cpp
254	)
255	ADD_DEFINITIONS( "-DUSE_CLUSTER_DUMMY" )
256	ENDIF()
257
258
259	# Module extLink
260	SET(SOURCES
261	${SOURCES}
262	include/extLink/dataIO_extLink.h
263	include/extLink/manip_extLink.h
264	src/extLink/manip_extLink.cpp
265	)
266	IF ( WIN32 )
267	SET(USE_EXTLINK_VCL ON CACHE BOOL "Enable to use the VCL Implementation for the externalLink interface")
268	IF( USE_EXTLINK_VCL )
269	SET(EXTLINK_VCL_INCLUDE_DIR ../VCL_1.0.3.4/source/include/VCL CACHE PATH "Select the INCLUDE directory path for extLink VCL Implementation." )
270	SET(SOURCES
271	${SOURCES}
272	include/extLink/dataIO_extLinkVCL.h
273	src/extLink/dataIO_extLinkVCL.cpp
274	)
275	INCLUDE_DIRECTORIES(${EXTLINK_VCL_INCLUDE_DIR})
276	ADD_DEFINITIONS( "-DUSE_EXTLINK_VCL" )
277	#Linking: VCL uses #pragma to link, no need for linking configuration in CMAKE
278	ELSE(USE_EXTLINK_VCL)
279	SET(SOURCES
280	${SOURCES}
281	include/extLink/dataIO_extLinkDummy.h
282	src/extLink/dataIO_extLinkDummy.cpp
283	)
284	UNSET(EXTLINK_VCL_INCLUDE_DIR CACHE)
285	ADD_DEFINITIONS( "-DUSE_EXTLINK_DUMMY" )
286	ENDIF(USE_EXTLINK_VCL)
287	ELSE(WIN32)
288	UNSET(EXTLINK_VCL_INCLUDE_DIR CACHE)
289	SET(SOURCES
290	${SOURCES}
291	include/extLink/dataIO_extLinkDummy.h
292	src/extLink/dataIO_extLinkDummy.cpp
293	)
294	ADD_DEFINITIONS( "-DUSE_EXTLINK_DUMMY" )
295	ENDIF(WIN32)
296
297
298
299	# Set core sources
300	SET(SOURCES
301	${SOURCES}
302	# Core
303	include/core/visual_core.h
304	src/core/visual_core.cpp
305	src/core/osgVisual.cpp
306	# Memory Leak debugging
307	include/core/leakDetection.h
308	# Util
309	include/util/visual_util.h
310	src/util/visual_util.cpp
311	# Draw 2D
312	include/draw2D/visual_draw2D.h
313	src/draw2D/visual_draw2D.cpp
314	# Debug HUD
315	include/draw2D/visual_debug_hud.h
316	src/draw2D/visual_debug_hud.cpp
317	# Example HUD
318	include/draw2D/visual_hud.h
319	src/draw2D/visual_hud.cpp
320	# Draw 3D
321	include/draw3D/visual_draw3D.h
322	src/draw3D/visual_draw3D.cpp
323	# Object Mounted Manipulator
324	include/manip_ObjectMounted/manip_objectMounted.h
325	src/manip_ObjectMounted/manip_objectMounted.cpp
326	# Objects
327	include/object/visual_object.h
328	include/object/object_updater.h
329	src/object/visual_object.cpp
330	src/object/object_updater.cpp
331	# DataIO
332	include/dataIO/visual_dataIO.h
333	include/dataIO/dataIO_transportContainer.h
334	include/dataIO/dataIO_slot.h
335	include/dataIO/dataIO_executer.h
336	src/dataIO/visual_dataIO.cpp
337	src/dataIO/dataIO_transportContainer.cpp
338	src/dataIO/dataIO_slot.cpp
339	src/dataIO/dataIO_executer.cpp
340	)
341
342	INCLUDE_DIRECTORIES(include/core include/util include/draw2D include/draw3D include/object include/manip_ObjectMounted)
343	INCLUDE_DIRECTORIES(include/dataIO include/cluster include/extLink ${OPENSCENEGRAPH_INCLUDE_DIRS} .)
344
345
346	# Executable Output
347	SET(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${CMAKE_SOURCE_DIR}/bin)
348	ADD_EXECUTABLE(osgVisual ${SOURCES})
349
350
351	# Linking
352	TARGET_LINK_LIBRARIES(osgVisual ${OPENSCENEGRAPH_LIBRARIES} ${OPENGL_LIBRARIES} ${LIBXML2_LIBRARY})
353
354
355	IF(USE_SKY_SILVERLINING )
356	IF(WIN32)
357	TARGET_LINK_LIBRARIES(osgVisual "winmm.lib")
358	ENDIF(WIN32)
359	TARGET_LINK_LIBRARIES(osgVisual debug ${SILVERLINING_LIBRARY_DEBUG} optimized ${SILVERLINING_LIBRARY_RELEASE})
360	ENDIF(USE_SKY_SILVERLINING)
361
362	IF(USE_VISTA2D)
363	TARGET_LINK_LIBRARIES(osgVisual debug ${VISTA2D_LIBRARY_DEBUG} optimized ${VISTA2D_LIBRARY_RELEASE})
364	ENDIF(USE_VISTA2D)
365
366	IF(USE_CLUSTER_ENET AND WIN32)
367	TARGET_LINK_LIBRARIES(osgVisual "winmm.lib" "ws2_32.lib" )
368	ENDIF(USE_CLUSTER_ENET AND WIN32)
369
370	# CMAKE Fix for VS to not prepend build type to path.
371	IF(MSVC)
372	SET_TARGET_PROPERTIES(osgVisual PROPERTIES PREFIX "../")
373	ENDIF(MSVC)
374	SET_TARGET_PROPERTIES( osgVisual PROPERTIES DEBUG_POSTFIX d )
375
376
377	# Generating vcproj file, if MSVC to preset debugging parameter - based on http://stackoverflow.com/questions/1005901/how-to-set-path-environment-variable-using-cmake-and-visual-studio-to-run-test
378	IF (MSVC)
379	# Set up a default .user file that contains the debugging setup
380	## Find user and system name
381	SET(SYSTEM_NAME $ENV{USERDOMAIN} CACHE STRING "Build System Name")
382	SET(USER_NAME $ENV{USERNAME} CACHE STRING "Build System UserName")
383	SET(USERFILE_COMMAND_DEBUG "$(TargetPath)" CACHE STRING "Command to execute on debugging (VS Project settings)" )
384	SET(USERFILE_WORKING_DIRECTORY_DEBUG "bin" CACHE STRING "Working directory on debugging (VS Project settings)" )
385	SET(USERFILE_COMMAND_ARGUMENTS_DEBUG "-C center --window 100 100 800 600 -m D:/OpenSceneGraph/VPB-Testdatensatz/DB_Small/database.ive -p salzburg.path" CACHE STRING "Command arguments (VS Project settings)" )
386	SET(USERFILE_REMOTE_MACHINE_DEBUG ${USER_NAME} CACHE STRING "Remote Debugging Machine (VS Project settings)")
387	IF (DESTINATION_ARCH STREQUAL "x64")
388	SET(USERFILE_ENVIRONMENT "PATH=%OSG_X64%;%PATH%" CACHE STRING "Environment Variables that VS should merge on thy fly with system environment to run osgVisual (VS Project settings)")
389	ENDIF ()
390
391
392	# Only do this if one doesn't already exist
393	SET (USER_FILE ${PROJECT_NAME}.vcproj.${SYSTEM_NAME}.${USER_NAME}.user)
394	IF (NOT EXISTS "${USER_FILE}")
395	message (STATUS "Creating ${USER_FILE} with default debug settings")
396	# These are the configuration variables
397	IF (CMAKE_GENERATOR MATCHES "Win64")
398	SET (USERFILE_PLATFORM "x64")
399	ELSE ()
400	SET (USERFILE_PLATFORM "Win32")
401	ENDIF ()
402
403	# Configure the template file
404	# MSC_VER 1300: MSC 13.0, VC 7.0, VS 2002
405	# MSC_VER 1310: MSC 13.1, VC 7.1, VS 2003
406	# MSC_VER 1400: MSC 14.0, VC 8.0, VS 2005
407	# MSC_VER 1500: MSC 15.0, VC 9.0, VS 2008
408	# MSC_VER 1600: MSC ??.0, VC 10.0, VS 2010
409	IF (MSVC_VERSION EQUAL 1400)
410	CONFIGURE_FILE(VC80.vcproj.user.template ${USER_FILE} @ONLY)
411	ENDIF()
412	IF (MSVC_VERSION EQUAL 1500)
413	CONFIGURE_FILE(VC90.vcproj.user.template ${USER_FILE} @ONLY)
414	ENDIF()
415	ELSE()
416	message (STATUS "Userfile ${USER_FILE} already exist: Skipping")
417	ENDIF()
418	ENDIF()
419
420

Note: See TracBrowser for help on using the repository browser.

Download in other formats: