Context Navigation

source: osgVisual/CMakeLists.txt @ 166

Last change on this file since 166 was 159, checked in by Torben Dannhauer, 14 years ago

change dataIO configuration from command line to xml File.

Status: in Progress

File size: 17.6 KB

Line
1	#################################################################################################
2	# This file allows to configure osgVisual with CMAKE to generate native build solutions. #
3	# #
4	# Specify the following environment variables to use osgVisual and this CMAKE script: #
5	# * OSG_ROOT: Path to your 32 bit (x86) OSG, e.g. D:\OSG\OpenSceneGraph-2.9.8_x86 #
6	# * OSG_ROOT_X64: Path to your 64 bit (x64) OSG, e.g. D:\OSG\OpenSceneGraph-2.9.8_x64 #
7	# * OSG: Path to your 32 bit (x86) OSG and 3rdParty binary folder, #
8	# e.g. %OSG_ROOT%\bin;D:\OSG\3rdParty\bin\x86 #
9	# * OSG_X64: Path to your 64 bit (x64) OSG and 3rdParty binary folder, #
10	# e.g. %OSG_ROOT_X64%\bin;D:\OSG\3rdParty\bin\x64 #
11	# * PATH: Extend with %OSG% or %OSG_X64% to use OSG and osgVisual from command line, #
12	# e.g. PATH=%PATH%;%OSG% #
13	# #
14	# NOTE: On Visual Studio and x64 Arch, CMAKE uses the project settings to specify the #
15	# correct x64 OSG path, so you can use osg as 32 bit in your system path. #
16	# #
17	# #
18	#################################################################################################
19
20	cmake_minimum_required(VERSION 2.8)
21
22
23	PROJECT(osgVisual)
24	#SET(CMAKE_MODULE_PATH "${osgVisual_SOURCE_DIR}/../CMakeModules;${CMAKE_MODULE_PATH}")
25
26	# Check Architecture
27	IF( CMAKE_SIZEOF_VOID_P EQUAL 4 )
28	MESSAGE( STATUS "32 bit architecture detected" )
29	SET(DESTINATION_ARCH "x86")
30	ENDIF()
31	IF( CMAKE_SIZEOF_VOID_P EQUAL 8 )
32	MESSAGE( STATUS "64 bit architecture detected" )
33	SET(DESTINATION_ARCH "x64")
34	ENDIF()
35
36
37	# Get required packages
38	IF(DESTINATION_ARCH STREQUAL "x64")
39	SET(OSG_ROOT_BKP $ENV{OSG_ROOT}) # BACKUP old OSG_ROOT
40	SET(ENV{OSG_ROOT} $ENV{OSG_ROOT_X64}) # Replace OSGROOT with OSG_ROOT_X64 to force CMAKE to find the correct OSG version (64 bit)
41	ENDIF ()
42
43	SET(OpenSceneGraph_MARK_AS_ADVANCED ON)
44	FIND_PACKAGE(OpenSceneGraph 2.9.9 REQUIRED osgViewer OpenThreads osgDB osgTerrain osgGA osgText osgSim osgUtil)
45	FIND_PACKAGE(OpenGL REQUIRED)
46
47
48	IF(DESTINATION_ARCH STREQUAL "x64")
49	SET(ENV{OSG_ROOT} ${OSG_ROOT_BKP}) # Restore old OSG_ROOT
50	UNSET(OSG_ROOT_BKP) # Delete backup
51	ENDIF ()
52
53	# LIBXML2
54	SET(LIBXML2_LIBRARY ../../OpenSceneGraph/3rdParty_x86_x64/${DESTINATION_ARCH}/lib/libxml2 CACHE FILEPATH "Select the libxml2 library to link osgVisual against. REQUIRED!" )
55	SET(LIBXML2_INCLUDE ../../OpenSceneGraph/3rdParty_x86_x64/${DESTINATION_ARCH}/include CACHE PATH "Select the libxml2 include path to link osgVisual against. REQUIRED!" )
56	INCLUDE_DIRECTORIES( ${LIBXML2_INCLUDE} )
57
58	# Module sky-silverlining
59	# OPTION( OPTION_VAR "description string" [initial value] )
60	IF ( WIN32 )
61
62	SET(USE_SKY_SILVERLINING ON CACHE BOOL "Enable to use Sundog-soft's Silverlining SDK for sky & weather")
63	IF(USE_SKY_SILVERLINING )
64	SET(SOURCES
65	${SOURCES}
66	include/sky_Silverlining/skySilverLining_AtmosphereReference.h
67	include/sky_Silverlining/skySilverLining_cloudLayerSlot.h
68	include/sky_Silverlining/skySilverLining_cloudsDrawable.h
69	include/sky_Silverlining/skySilverLining_ProjectionMatrixCallback.h
70	include/sky_Silverlining/skySilverLining_skyDrawable.h
71	include/sky_Silverlining/visual_skySilverLining.h
72	src/sky_Silverlining/skySilverLining_cloudsDrawable.cpp
73	src/sky_Silverlining/skySilverLining_skyDrawable.cpp
74	src/sky_Silverlining/visual_skySilverLining.cpp
75	)
76
77	IF (DESTINATION_ARCH STREQUAL "x86")
78	SET(SILVERLINING_ARCH "win32")
79	ELSEIF ( DESTINATION_ARCH STREQUAL "x64" )
80	SET(SILVERLINING_ARCH "x64")
81	ENDIF ()
82	SET(SILVERLINING_LIBRARY_RELEASE $ENV{SILVERLINING_PATH}\\lib\\vc9\\${SILVERLINING_ARCH}\\SilverLining-MT-DLL.lib CACHE FILEPATH "Select the release library of Sundog-Soft's Silverlining SDK to link against." )
83	SET(SILVERLINING_LIBRARY_DEBUG $ENV{SILVERLINING_PATH}\\lib\\vc9\\${SILVERLINING_ARCH}\\SilverLining-MTD-DLL.lib CACHE FILEPATH "Select the debug library of Sundog-Soft's Silverlining SDK to link against." )
84	SET(SILVERLINING_INCLUDE_DIR "$ENV{SILVERLINING_PATH}\\Public Headers" CACHE PATH "Enter the path to the the public Include directory of Sundog-Soft's Silverlining SDK" )
85	SET(SILVERLINING_LICENSEE "Your user name" CACHE STRING "Enter your Silverlining licensee name. If you license available, osgVisual will work with silverlining as 5 minute demo with the default value." )
86	SET(SILVERLINING_LICENSE "Your license code" CACHE STRING "Enter your Silverlining license key. If you license available, osgVisual will work with silverlining as 5 minute demo with the default value." )
87	INCLUDE_DIRECTORIES(${SILVERLINING_INCLUDE_DIR} include/sky_Silverlining)
88	ADD_DEFINITIONS( "-DUSE_SKY_SILVERLINING" )
89	ADD_DEFINITIONS( "-DSILVERLINING_LICENSEE=\"${SILVERLINING_LICENSEE}\"" )
90	ADD_DEFINITIONS( "-DSILVERLINING_LICENSE=\"${SILVERLINING_LICENSE}\"" )
91
92	ELSE(USE_SKY_SILVERLINING)
93	UNSET(SILVERLINING_LIBRARY_RELEASE CACHE)
94	UNSET(SILVERLINING_LIBRARY_DEBUG CACHE)
95	UNSET(SILVERLINING_INCLUDE_DIR CACHE)
96	UNSET(SILVERLINING_LICENSEE)
97	UNSET(SILVERLINING_LICENSE)
98	ENDIF(USE_SKY_SILVERLINING)
99	ENDIF(WIN32)
100	IF(UNIX)
101	SET(USE_SKY_SILVERLINING ON CACHE BOOL "Enable to use Sundog-soft's Silverlining SDK for sky & weather")
102	IF(USE_SKY_SILVERLINING )
103	SET(SOURCES
104	${SOURCES}
105	include/sky_Silverlining/skySilverLining_AtmosphereReference.h
106	include/sky_Silverlining/skySilverLining_cloudLayerSlot.h
107	include/sky_Silverlining/skySilverLining_cloudsDrawable.h
108	include/sky_Silverlining/skySilverLining_ProjectionMatrixCallback.h
109	include/sky_Silverlining/skySilverLining_skyDrawable.h
110	include/sky_Silverlining/visual_skySilverLining.h
111	src/sky_Silverlining/skySilverLining_cloudsDrawable.cpp
112	src/sky_Silverlining/skySilverLining_skyDrawable.cpp
113	src/sky_Silverlining/visual_skySilverLining.cpp
114	)
115
116	IF (DESTINATION_ARCH STREQUAL "x86")
117	SET(SILVERLINING_ARCH "win32")
118	ELSEIF ( DESTINATION_ARCH STREQUAL "x64" )
119	SET(SILVERLINING_ARCH "x64")
120	ENDIF ()
121	SET(SILVERLINING_LIBRARY_RELEASE $ENV{SILVERLINING_PATH}\\lib\\vc9\\${SILVERLINING_ARCH}\\SilverLining-MT-DLL.lib CACHE FILEPATH "Select the release library of Sundog-Soft's Silverlining SDK to link against." )
122	SET(SILVERLINING_LIBRARY_DEBUG $ENV{SILVERLINING_PATH}\\lib\\vc9\\${SILVERLINING_ARCH}\\SilverLining-MTD-DLL.lib CACHE FILEPATH "Select the debug library of Sundog-Soft's Silverlining SDK to link against." )
123	SET(SILVERLINING_INCLUDE_DIR "$ENV{SILVERLINING_PATH}\\Public Headers" CACHE PATH "Enter the path to the the public Include directory of Sundog-Soft's Silverlining SDK" )
124	SET(SILVERLINING_LICENSEE "Your user name" CACHE STRING "Enter your Silverlining licensee name. If you license available, osgVisual will work with silverlining as 5 minute demo with the default value." )
125	SET(SILVERLINING_LICENSE "Your license code" CACHE STRING "Enter your Silverlining license key. If you license available, osgVisual will work with silverlining as 5 minute demo with the default value." )
126	INCLUDE_DIRECTORIES(${SILVERLINING_INCLUDE_DIR} "include/sky_Silverlining" )
127	ADD_DEFINITIONS( "-DUSE_SKY_SILVERLINING" )
128	ADD_DEFINITIONS( "-DSILVERLINING_LICENSEE=\"${SILVERLINING_LICENSEE}\"" )
129	ADD_DEFINITIONS( "-DSILVERLINING_LICENSE=\"${SILVERLINING_LICENSE}\"" )
130
131	ELSE(USE_SKY_SILVERLINING)
132	UNSET(SILVERLINING_LIBRARY_RELEASE CACHE)
133	UNSET(SILVERLINING_LIBRARY_DEBUG CACHE)
134	UNSET(SILVERLINING_INCLUDE_DIR CACHE)
135	UNSET(SILVERLINING_LICENSEE)
136	UNSET(SILVERLINING_LICENSE)
137	ENDIF(USE_SKY_SILVERLINING)
138	ENDIF()
139
140	# Module distortion
141	SET(USE_DISTORTION OFF CACHE BOOL "Enable to use distortion with Projection Designer's distortion maps")
142	IF(USE_DISTORTION)
143	SET(SOURCES
144	${SOURCES}
145	include/distortion/visual_distortion.h
146	src/distortion/visual_distortion.cpp
147	)
148	INCLUDE_DIRECTORIES(include/distortion)
149	ADD_DEFINITIONS( "-DUSE_DISTORTION" )
150	ENDIF(USE_DISTORTION)
151
152
153	# Module Vista2D - Only available under Win32
154	if( WIN32 )
155	SET(USE_VISTA2D OFF CACHE BOOL "Enable to use Vista2D by Wetzel Technology")
156	IF( USE_VISTA2D )
157	INCLUDE_DIRECTORIES( include/vista2D )
158	SET(SOURCES
159	${SOURCES}
160	include/vista2D/visual_vista2D.h
161	src/vista2D/visual_vista2D.cpp
162	)
163	SET(VISTA2D_INCLUDE_DIR . CACHE PATH "Select the INCLUDE directory path for Vista2D by Wetzel Technology." )
164	SET(VISTA2D_LIBRARY_DEBUG . CACHE FILEPATH "Select debug LIBRARY path for linking against Vista2D by Wetzel Technology." )
165	SET(VISTA2D_LIBRARY_RELEASE . CACHE FILEPATH "Select release LIBRARY path for linking against Vista2D by Wetzel Technology." )
166	INCLUDE_DIRECTORIES(${VISTA2D_INCLUDE_DIR})
167	ADD_DEFINITIONS( "-DUSE_VISTA2D" )
168	ELSE(USE_VISTA2D)
169	UNSET(VISTA2D_INCLUDE_DIR CACHE)
170	UNSET(VISTA2D_LIBRARY_DEBUG CACHE)
171	UNSET(VISTA2D_LIBRARY_RELEASE CACHE)
172	ENDIF(USE_VISTA2D)
173	ENDIF(WIN32)
174
175
176	# Module Spacenavigator manipulator - ONLY under WIN32
177	if( WIN32 )
178	# No header or linking required, because WIN32 COM interface used.
179	SET(USE_SPACEMOUSE ON CACHE BOOL "Enable to use camera manipulator based on Spacenavigator by 3DConnexion")
180	IF( USE_SPACEMOUSE )
181	SET(SOURCES
182	${SOURCES}
183	include/manip_Spacemouse/manip_spaceMouse.h
184	include/manip_Spacemouse/manip_freeSpaceMouse.h
185	include/manip_Spacemouse/manip_nodeTrackerSpaceMouse.h
186	src/manip_Spacemouse/manip_spaceMouse.cpp
187	src/manip_Spacemouse/manip_freeSpaceMouse.cpp
188	src/manip_Spacemouse/manip_nodeTrackerSpaceMouse.cpp
189	)
190	INCLUDE_DIRECTORIES(include/manip_Spacemouse)
191	ADD_DEFINITIONS( "-DUSE_SPACENAVIGATOR" )
192	ENDIF(USE_SPACEMOUSE)
193	ENDIF(WIN32)
194
195
196	# Module cluster
197	SET(USE_CLUSTER_ASIO_TCP_IOSTREAM OFF CACHE BOOL "Enable to use the Boost ASIO TCP iostream implementation for the cluster interface")
198	SET(USE_CLUSTER_ENET ON CACHE BOOL "Enable to use the ENet reliable UDP library implementation for the cluster interface")
199	IF( USE_CLUSTER_ASIO_TCP_IOSTREAM )
200	SET(SOURCES
201	${SOURCES}
202	include/cluster/dataIO_cluster.h
203	include/cluster/dataIO_clusterAsioTcpIostream.h
204	src/cluster/dataIO_clusterAsioTcpIostream.cpp
205	)
206	ADD_DEFINITIONS( "-DUSE_CLUSTER_ASIO_TCP_IOSTREAM" )
207	ADD_DEFINITIONS( "-D_WIN32_WINNT=0x0501" )
208	SET(BOOST_LIBRARY_PATH "../../3rdParty_x86_x64/lib/${DESTINATION_ARCH}/" CACHE PATH "Select the library folder of Boost libraries to link against." )
209	SET(BOOST_INCLUDE_DIR "../../3rdParty_x86_x64/include/boost-1.43.0/" CACHE PATH "Enter the path to the the include directory of Boost" )
210	INCLUDE_DIRECTORIES(${BOOST_INCLUDE_DIR})
211	LINK_DIRECTORIES(${BOOST_LIBRARY_PATH})
212	ELSE()
213	UNSET(BOOST_LIBRARY_PATH CACHE)
214	UNSET(BOOST_ASIO_INCLUDE_DIR CACHE)
215	ENDIF()
216
217	IF( USE_CLUSTER_ENET )
218	SET(SOURCES
219	${SOURCES}
220	include/cluster/dataIO_cluster.h
221	include/cluster/dataIO_clusterENet.h
222	src/cluster/dataIO_clusterENet.cpp
223	include/cluster/dataIO_clusterENet_implementation.h
224	src/cluster/dataIO_clusterENet_implementation.cpp
225	src/cluster/enet/callbacks.c
226	src/cluster/enet/compress.c
227	src/cluster/enet/host.c
228	src/cluster/enet/list.c
229	src/cluster/enet/packet.c
230	src/cluster/enet/peer.c
231	src/cluster/enet/protocol.c
232	src/cluster/enet/unix.c
233	src/cluster/enet/win32.c
234	include/cluster/enet/callbacks.h
235	include/cluster/enet/enet.h
236	include/cluster/enet/list.h
237	include/cluster/enet/protocol.h
238	include/cluster/enet/time.h
239	include/cluster/enet/types.h
240	include/cluster/enet/unix.h
241	include/cluster/enet/utility.h
242	include/cluster/enet/win32.h
243	)
244	ADD_DEFINITIONS( "-DUSE_CLUSTER_ENET" )
245
246	ENDIF()
247
248	IF(NOT USE_CLUSTER_ASIO_TCP_IOSTREAM AND NOT USE_CLUSTER_ENET)
249	SET(SOURCES
250	${SOURCES}
251	include/cluster/dataIO_cluster.h
252	include/cluster/dataIO_clusterDummy.h
253	src/cluster/dataIO_clusterDummy.cpp
254	)
255	ADD_DEFINITIONS( "-DUSE_CLUSTER_DUMMY" )
256	ENDIF()
257
258
259	# Module extLink
260	SET(SOURCES
261	${SOURCES}
262	include/extLink/dataIO_extLink.h
263	include/extLink/manip_extLink.h
264	src/extLink/manip_extLink.cpp
265	)
266	IF ( WIN32 )
267	SET(USE_EXTLINK_VCL ON CACHE BOOL "Enable to use the VCL Implementation for the externalLink interface")
268	IF( USE_EXTLINK_VCL )
269	SET(EXTLINK_VCL_INCLUDE_DIR ../VCL_1.0.3.4/source/include/VCL CACHE PATH "Select the INCLUDE directory path for extLink VCL Implementation." )
270	SET(SOURCES
271	${SOURCES}
272	include/extLink/dataIO_extLinkVCL.h
273	src/extLink/dataIO_extLinkVCL.cpp
274	)
275	INCLUDE_DIRECTORIES(${EXTLINK_VCL_INCLUDE_DIR})
276	ADD_DEFINITIONS( "-DUSE_EXTLINK_VCL" )
277	#Linking: VCL uses #pragma to link, no need for linking configuration in CMAKE
278	ELSE(USE_EXTLINK_VCL)
279	SET(SOURCES
280	${SOURCES}
281	include/extLink/dataIO_extLinkDummy.h
282	src/extLink/dataIO_extLinkDummy.cpp
283	)
284	UNSET(EXTLINK_VCL_INCLUDE_DIR CACHE)
285	ADD_DEFINITIONS( "-DUSE_EXTLINK_DUMMY" )
286	ENDIF(USE_EXTLINK_VCL)
287	ELSE(WIN32)
288	UNSET(EXTLINK_VCL_INCLUDE_DIR CACHE)
289	SET(SOURCES
290	${SOURCES}
291	include/extLink/dataIO_extLinkDummy.h
292	src/extLink/dataIO_extLinkDummy.cpp
293	)
294	ADD_DEFINITIONS( "-DUSE_EXTLINK_DUMMY" )
295	ENDIF(WIN32)
296
297
298
299	# Set core sources
300	SET(SOURCES
301	${SOURCES}
302	# Core
303	include/core/visual_core.h
304	src/core/visual_core.cpp
305	src/core/osgVisual.cpp
306	# Memory Leak debugging
307	include/core/leakDetection.h
308	# Util
309	include/util/visual_util.h
310	src/util/visual_util.cpp
311	# Draw 2D
312	include/draw2D/visual_draw2D.h
313	src/draw2D/visual_draw2D.cpp
314	# Debug HUD
315	include/draw2D/visual_debug_hud.h
316	src/draw2D/visual_debug_hud.cpp
317	# Example HUD
318	include/draw2D/visual_hud.h
319	src/draw2D/visual_hud.cpp
320	# Draw 3D
321	include/draw3D/visual_draw3D.h
322	src/draw3D/visual_draw3D.cpp
323	# Object Mounted Manipulator
324	include/manip_ObjectMounted/manip_objectMounted.h
325	src/manip_ObjectMounted/manip_objectMounted.cpp
326	# Objects
327	include/object/visual_object.h
328	include/object/object_updater.h
329	src/object/visual_object.cpp
330	src/object/object_updater.cpp
331	# DataIO
332	include/dataIO/visual_dataIO.h
333	include/dataIO/dataIO_transportContainer.h
334	include/dataIO/dataIO_slot.h
335	include/dataIO/dataIO_executer.h
336	src/dataIO/visual_dataIO.cpp
337	src/dataIO/dataIO_transportContainer.cpp
338	src/dataIO/dataIO_slot.cpp
339	src/dataIO/dataIO_executer.cpp
340	)
341
342	INCLUDE_DIRECTORIES(include/core include/util include/draw2D include/draw3D include/object include/manip_ObjectMounted)
343	INCLUDE_DIRECTORIES(include/dataIO include/cluster include/extLink ${OPENSCENEGRAPH_INCLUDE_DIRS} .)
344
345
346	# Executable Output
347	SET(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${CMAKE_SOURCE_DIR}/bin)
348	ADD_EXECUTABLE(osgVisual ${SOURCES})
349
350
351	# Linking
352	TARGET_LINK_LIBRARIES(osgVisual ${OPENSCENEGRAPH_LIBRARIES} ${OPENGL_LIBRARIES} ${LIBXML2_LIBRARY})
353
354
355	IF(USE_SKY_SILVERLINING )
356	IF(WIN32)
357	TARGET_LINK_LIBRARIES(osgVisual "winmm.lib")
358	ENDIF(WIN32)
359	TARGET_LINK_LIBRARIES(osgVisual debug ${SILVERLINING_LIBRARY_DEBUG} optimized ${SILVERLINING_LIBRARY_RELEASE})
360	ENDIF(USE_SKY_SILVERLINING)
361
362	IF(USE_VISTA2D)
363	TARGET_LINK_LIBRARIES(osgVisual debug ${VISTA2D_LIBRARY_DEBUG} optimized ${VISTA2D_LIBRARY_RELEASE})
364	ENDIF(USE_VISTA2D)
365
366	IF(USE_CLUSTER_ENET AND WIN32)
367	TARGET_LINK_LIBRARIES(osgVisual "winmm.lib" "ws2_32.lib" )
368	ENDIF(USE_CLUSTER_ENET AND WIN32)
369
370	# CMAKE Fix for VS to not prepend build type to path.
371	IF(MSVC)
372	SET_TARGET_PROPERTIES(osgVisual PROPERTIES PREFIX "../")
373	ENDIF(MSVC)
374	SET_TARGET_PROPERTIES( osgVisual PROPERTIES DEBUG_POSTFIX d )
375
376	# Adding definitions to disable multicore compiling
377	IF(MSVC)
378	SET(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /MP1")
379	ENDIF(MSVC)
380
381	# Generating vcproj file, if MSVC to preset debugging parameter - based on http://stackoverflow.com/questions/1005901/how-to-set-path-environment-variable-using-cmake-and-visual-studio-to-run-test
382	IF (MSVC)
383	# Set up a default .user file that contains the debugging setup
384	## Find user and system name
385	SET(SYSTEM_NAME $ENV{USERDOMAIN} CACHE STRING "Build System Name")
386	SET(USER_NAME $ENV{USERNAME} CACHE STRING "Build System UserName")
387	SET(USERFILE_COMMAND_DEBUG "$(TargetPath)" CACHE STRING "Command to execute on debugging (VS Project settings)" )
388	SET(USERFILE_WORKING_DIRECTORY_DEBUG "bin" CACHE STRING "Working directory on debugging (VS Project settings)" )
389	SET(USERFILE_COMMAND_ARGUMENTS_DEBUG " --window 100 100 800 600 D:/OpenSceneGraph/VPB-Testdatensatz/DB_Small/database.ive -p salzburg.path --config osgVisualConfig.xml" CACHE STRING "Command arguments (VS Project settings)" )
390	SET(USERFILE_REMOTE_MACHINE_DEBUG ${USER_NAME} CACHE STRING "Remote Debugging Machine (VS Project settings)")
391	IF (DESTINATION_ARCH STREQUAL "x64")
392	SET(USERFILE_ENVIRONMENT "PATH=%OSG_X64%;%PATH%" CACHE STRING "Environment Variables that VS should merge on thy fly with system environment to run osgVisual (VS Project settings)")
393	ENDIF ()
394
395
396	# Only do this if one doesn't already exist
397	SET (USER_FILE ${PROJECT_NAME}.vcproj.${SYSTEM_NAME}.${USER_NAME}.user)
398	IF (NOT EXISTS "${USER_FILE}")
399	message (STATUS "Creating ${USER_FILE} with default debug settings")
400	# These are the configuration variables
401	IF (CMAKE_GENERATOR MATCHES "Win64")
402	SET (USERFILE_PLATFORM "x64")
403	ELSE ()
404	SET (USERFILE_PLATFORM "Win32")
405	ENDIF ()
406
407	# Configure the template file
408	# MSC_VER 1300: MSC 13.0, VC 7.0, VS 2002
409	# MSC_VER 1310: MSC 13.1, VC 7.1, VS 2003
410	# MSC_VER 1400: MSC 14.0, VC 8.0, VS 2005
411	# MSC_VER 1500: MSC 15.0, VC 9.0, VS 2008
412	# MSC_VER 1600: MSC ??.0, VC 10.0, VS 2010
413	IF (MSVC_VERSION EQUAL 1400)
414	CONFIGURE_FILE(VC80.vcproj.user.template ${USER_FILE} @ONLY)
415	ENDIF()
416	IF (MSVC_VERSION EQUAL 1500)
417	CONFIGURE_FILE(VC90.vcproj.user.template ${USER_FILE} @ONLY)
418	ENDIF()
419	ELSE()
420	message (STATUS "Userfile ${USER_FILE} already exist: Skipping")
421	ENDIF()
422	ENDIF()
423
424

Note: See TracBrowser for help on using the repository browser.

Download in other formats: